Laynie Hasan.

← All offer guides

Tech & Office Comparisons · Reviewed October 12, 2026

Anker 341 vs Belkin AVC009: Which 7-in-1 USB-C Hub Fits?

The port counts match, but the seventh connection does not. Anker adds a separate USB-C data port; Belkin adds a 3.5 mm audio jack and documents HDMI 2.0 output up to 4K at 60 Hz.

Best for

Laptop users choosing a compact hub for one HDMI display, two USB-A devices, card media and pass-through USB-C charging.

Probably not for

Computers without a compatible USB-C host, users needing multiple displays or Ethernet, or anyone assuming a USB-C shape guarantees video and charging support.

Specifications at a glance

Manufacturer specifications for the exact versions compared
DetailAnker 341 A8346Belkin AVC009fqSGY-V2
HDMIHDMI 1.4, up to 4K at 30 HzHDMI 2.0, up to 4K at 60 Hz
USB-A dataTwo USB 3.0 ports, up to 5 GbpsTwo USB-A ports; hub data up to 5 Gbps
Downstream USB-COne USB-C data port plus separate PD inputOne USB-C PD 3.0 port; no separate USB-C data port listed
Charging claim100 W input; up to 85 W to host after hub use100 W maximum Power Delivery
Card readersSD and microSD, UHS-ISD and microSD
AudioNo audio jack3.5 mm audio in/out
CableTethered USB-C host cable8.3 in / 21 cm tethered USB-C cable
Exact modelA8346AVC009fqSGY-V2

As an Amazon Associate I earn from qualifying purchases.

Anker 341 USB-C Hub, 7-in-1 (A8346)

A seven-port hub with HDMI, two USB-A data ports, one separate USB-C data port, a USB-C Power Delivery input, and SD plus microSD readers. The charger is not included.

Pros

  • Separate downstream USB-C data port preserves a modern peripheral connection
  • Manufacturer specifies UHS-I for both card slots
  • Power path is clearly stated as 100 W input and up to 85 W to the host

Cons

  • HDMI is limited to the manufacturer-stated 4K at 30 Hz
  • No 3.5 mm audio connection
  • USB-C data port is specified as USB 2.0 in Anker's current technical table

Who it’s for: Choose it when a downstream USB-C data device is more important than analog audio or 4K at 60 Hz. Skip it if the intended display workflow needs the Belkin model's documented HDMI mode.

Check Anker 341 USB-C Hub, 7-in-1 (A8346) on Amazon

Belkin Connect USB-C 7-in-1 Multiport Hub (AVC009fqSGY-V2)

A seven-port hub with HDMI 2.0, two USB-A ports, USB-C PD 3.0, SD and microSD readers, and a 3.5 mm audio in/out jack. A compatible charger is not listed in the box.

Pros

  • Manufacturer documents display output up to 4K at 60 Hz
  • 3.5 mm audio supports a wired headset or analog audio connection
  • Publishes cable length, housing dimensions and a two-year warranty

Cons

  • No separate downstream USB-C data port is listed
  • 100 W is a maximum Power Delivery claim, not a promise of 100 W at every laptop
  • Host USB-C port must support video for HDMI use

Who it’s for: Choose it when analog audio or a documented 4K at 60 Hz display path matters more than a USB-C data port. Skip it if the seventh port needs to connect a USB-C storage or other data device.

Check Belkin Connect USB-C 7-in-1 Multiport Hub (AVC009fqSGY-V2) on Amazon

Seven ports can describe two different workflows

Each hub combines a tethered USB-C host connection with HDMI, two USB-A ports, an SD reader, a microSD reader and a USB-C power input. That accounts for six user-facing functions. Anker uses the remaining port for USB-C data, while Belkin uses it for 3.5 mm audio in and out. The identical count therefore hides the most important choice.

List the peripherals that must remain connected at the same time. A USB-C portable drive, card reader or other data device points toward Anker. A wired headset, speakers or an analog audio feed points toward Belkin. Adapters can change either workflow, but they add cost, cable clutter and another compatibility point that the hub itself does not solve.

Display capability starts at the laptop port

Anker specifies HDMI 1.4 with output up to 4K at 30 Hz. Belkin specifies HDMI 2.0 with output up to 4K at 60 Hz. Those are documented upper modes for the hub, not a guarantee that every laptop, cable, monitor and application will produce them. The complete signal path must support the selected resolution and refresh rate.

Belkin explicitly requires a video-enabled USB-C host port. That warning applies as a practical check for either hub: the USB-C connector shape alone does not prove DisplayPort Alternate Mode or another supported video path. Check the computer manual, the specific port symbol and the monitor input. Neither product adds a second independent display connection.

Power Delivery is pass-through, not a bundled power supply

Anker states that the hub accepts up to 100 W at its PD input and reserves 15 W for operation, leaving up to 85 W for the host. Belkin states 100 W maximum Power Delivery but does not frame that number as 100 W delivered to every computer. In either case, the charger, cable and laptop negotiation determine the actual charging level.

Neither selected package lists a USB-C charger in the box. Plan to use a compatible charger with enough capacity for the laptop and hub. A low-power phone adapter does not become a laptop supply merely because it fits. Some computers also limit charging through a particular USB-C port, so verify the host before treating either hub as a one-cable dock.

The data ports need device-by-device planning

Anker unambiguously rates its two USB-A 3.0 ports up to 5 Gbps and lists its separate USB-C data port as USB 2.0 at 480 Mbps in the technical table. That USB-C port is useful for connector compatibility, but it should not be presented as equal to the two faster USB-A paths. Anker's broader marketing language is less precise, so this guide follows the technical table.

Belkin states up to 5 Gbps data transfer for the hub and lists two USB-A ports, while its USB-C port is identified as PD 3.0. Do not assume that PD port is a general data connection. Shared hub bandwidth, storage media and host limits can affect real transfers, and no independent speed measurement is claimed here.

Card readers and audio separate the travel kits

Anker identifies both the SD and microSD readers as UHS-I. Belkin includes both sizes but does not publish the same card-bus designation on the current product page. Photographers should compare the exact card requirements and remember that a reader label does not promise the maximum speed printed on every card.

Belkin's 3.5 mm jack is described as audio in and out, making it the more direct choice for a wired headset with microphone or another analog audio device. Anker has no analog audio jack. Neither product should be assumed to replace a specialized audio interface, and port presence alone does not establish microphone quality or monitoring latency.

Choose by the missing port, then verify the host

Choose Anker 341 A8346 for a compact hub that preserves a separate USB-C data connection and publishes UHS-I card support. Choose Belkin AVC009fqSGY-V2 for documented HDMI 2.0 output up to 4K at 60 Hz and a 3.5 mm audio path. Both remain single-display hubs without Ethernet in the listed configuration.

Before purchase, confirm the host port supports the required video and charging features, the charger is adequate, and the exact ports match the peripherals. The verified Amazon ASINs are B07ZVKTP53 for Anker and B0DTJTS1WN for Belkin. No price, thermal, transfer-speed or display-stability test is claimed, and nearby hub variants may use different port maps.

Official sources and further reading

Sources reviewed on October 12, 2026. Prices, availability and terms can change; recheck before buying.

Related reading

Commission disclaimer

This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.