Laynie Hasan.

← All offer guides

School & Office Comparisons · Reviewed November 9, 2026

Avery 8371 vs 8871: Which Inkjet Business Cards Fit?

For a run of 230 appointment cards, Avery 8371 covers the job with one pack and uses lighter, perforated stock. For a shorter run of calling cards where you want a smooth, nonperforated edge, choose 8871 if your inkjet accepts 254 gsm stock. Both make the same size matte white card. Neither is the right sheet for a photograph that must run all the way to the edge.

Best for

Small businesses, makers and event organizers printing batches of wallet-size cards on a compatible inkjet, especially when contact details may change before a large run gets used.

Probably not for

Laser printers, artwork that needs full bleed, or a printer whose supported card-stock range does not include the weight of the selected sheet.

Specifications at a glance

Manufacturer specifications for the exact versions compared
What changes at the printer or deskAvery 8371Avery 8871
How the cards separatePerforated with small notchesClean Edge, nonperforated
Weight on the maker’s spec sheet216 gsm (80 lb)254 gsm (93 lb)
Pack yield250 cards on 25 sheets200 cards on 20 sheets
Finished card and layout2 × 3.5 inches; 10 per US Letter sheet2 × 3.5 inches; 10 per US Letter sheet
Surface and printerMatte white, both sides printable, inkjetMatte white, both sides printable, inkjet
Design to the outer edge?Leave a white borderLeave a white border

As an Amazon Associate I earn from qualifying purchases.

Avery 8371 Perforated Inkjet Business Cards, 250

A ten-card sheet for contact slips, pickup reminders or any other job where another five sheets in the pack matter more than a nonperforated edge.

Pros

  • The pack holds 50 more cards at the same ten-card sheet yield
  • 216 gsm is the lighter choice when the printer tray has a restrictive stock-weight limit

Cons

  • Separation follows notches rather than the nonperforated Clean Edge design
  • Matte white margins remain part of the design; a borderless printer setting is not the cure

Who it’s for: Pick 8371 for a sign-up desk that hands out the same short message all afternoon. Skip it if the brief explicitly calls for a nonperforated edge.

Check Avery 8371 Perforated Inkjet Business Cards, 250 on Amazon

Avery 8871 Clean Edge Inkjet Business Cards, 200

The Clean Edge version makes sense for a portfolio card or a small stack of introductions that someone will handle and keep. It changes the edge and the stock, not the size of your design.

Pros

  • The nonperforated separation leaves a smooth outer edge
  • A heavier matte card with room for a second-side map, contact line or handwritten note

Cons

  • 254 gsm may be outside the supported range of a tray that accepts the 8371
  • The pack stops at 200 cards, before allowing for proof sheets

Who it’s for: Pick 8871 for a short studio-opening run if your inkjet handles the heavier sheets. For 230 finished cards from one pack, choose 8371 instead.

Check Avery 8871 Clean Edge Inkjet Business Cards, 200 on Amazon

Read the paper limit before choosing the edge

Find the media table for your printer, not just the word “inkjet” on its front. Look up card stock for the tray you actually plan to use. A machine can accept a heavy sheet through its rear feed while specifying a lower limit for its cassette. If the instructions list approved media by type as well as weight, check both. The maximum for a particular photo paper is not automatically the maximum for every sheet of that weight.

Suppose the manual allows uncoated card stock up to 220 gsm in the feed you can reach. The 216 gsm figure for 8371 is within that weight range; 8871 at 254 gsm is outside it. In that office, the decision is already made if all the other requirements match. A driver setting marked “heavy” changes how the printer handles the sheet. It does not give a tray a new mechanical rating.

If either weight is supported, decide what a recipient does with the card. A bike repair shop might write a collection time on a slip that gets discarded on pickup. A furniture maker might leave a card beside a walnut stool for a visitor who wants to commission one later. The shop can put the extra 50 blanks to work. The maker has a reason to choose the heavier stock and smooth edge, even though the two cards take up exactly the same space in a wallet.

Clean Edge does not mean print to the edge

There are two edges to think about: the physical edge you touch and the place where colored ink stops. Avery’s Clean Edge name describes the first. Avery does not include either of these models in its list of print-to-the-edge cards. If the design is a full photograph of the walnut stool, neither pack will deliver the uninterrupted picture the photographer laid out. A narrow strip of unprinted stock is part of the finished design.

A white card can use that limitation well. Give the photograph a white frame on purpose, put the maker’s name below it, and place the website on the reverse. An address line that matters deserves more clearance than a decorative line. A frame that barely clears the boundary on screen can look noticeably lopsided if the sheet enters the printer a little to one side. Print at card size before deciding how close feels comfortable.

A different brief might ask for a square swing tag with color beyond the cut line. First consider a sheet expressly designed for that layout. For a few handmade tags, laying them out with trim marks and space between them on ordinary supported card stock is another option. The Dahle rotary trimmer comparison is useful for that separate job. There is no need to buy a trimmer just to free the standard rectangles from either Avery sheet.

Count complete sheets and keep one for a proof

Start with the number of finished cards you need, then divide by ten and round up. For 73 cards for a volunteer welcome table, eight sheets provide 80 positions. A ninth sheet gives you a proof to mark up without counting it toward the promised 73. This is easier to plan than trying to feed a partly dismantled sheet back through the printer. Keep the blanks whole until you have printed all the sides you need.

For the repair shop, 230 pickup cards take 23 sheets. Set aside one more to check the time field and the writing surface. That uses 24 of the 25 sheets in an 8371 pack. The 8871 pack contains 20 sheets, so it cannot cover even the finished run in this example. For a photographer handing out only 40 portfolio cards, both packs leave plenty in reserve. There the recipient’s first impression can reasonably decide the edge choice.

Ten cards on a sheet also need not mean ten identical cards. For a two-person pottery studio, five cards might carry the wholesale contact and five the class coordinator. If you use the same reverse for all ten, you have a simple way to split the run. If the backs differ, lay out a proof with both names prominently visible. It is surprisingly easy to give every wholesale contact the class coordinator’s booking link.

Make a front-and-back paper map

Start in the template named on the package. Avery lists 8371 as compatible with the 8871 template, so an existing layout is a useful starting point when changing stock. Use the two-sided design option if the back will carry information. Before reaching for the card sheets, mark one corner of ordinary letter paper with a pencil and write “tray side” on it. Printing one front and one back will show which way this printer turns the page.

Add a temporary letter to each front and the matching lowercase letter to its intended back. On a two-column design, check a pair from each column by holding the sheet to the light. The backs can be upright but attached to the wrong fronts. Once the pairing works, remove the letters, save the approved file and note how the marked corner traveled. That small piece of paper is worth keeping beside the printer for the day a coworker repeats the run.

Check the printed scale at the top and bottom of the sheet. Set the job to US Letter and actual size or 100 percent, then compare it with an unprinted card sheet held against a window. If the first row lines up but the fifth does not, look for a fit-to-page setting before nudging every card down by hand. A constant offset and an error that grows from row to row are different problems.

Give the finished card its real desk job

For a repair collection slip, print one real sheet with the same settings planned for the run. When the ink has dried, write an actual collection time on the card with the pen at the counter. Can someone distinguish a handwritten seven from a one? Is there room for “after 4:30” without writing over the phone number? Those details decide whether the slip works better than the scrap of paper it replaces.

If staff will date the card at pickup, make space for the physical impression before settling on the final layout. The Trodat self-inking date stamp comparison gives the different widths of two common date stamps. Make an impression with the stamp you actually own, then place it in the proposed box. A perfectly aligned print run still wastes 230 cards if the last digit of the year lands on the customer’s name.

For a portfolio card, hand the proof to someone without explaining it. Ask them to find the maker’s work using only the card. If the picture looks lovely but they cannot read the short web address, revise the type before deciding whether the stock feels substantial enough. Once the design works, keep its file with the product number and printer settings. Reprint only the quantity needed for the next event, particularly if the card points to a temporary exhibit or seasonal schedule.

Official sources and further reading

Sources reviewed on November 9, 2026. Prices, availability and terms can change; recheck before buying.

Commission disclaimer

This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.