Creator Tech Comparisons · Reviewed November 11, 2026
Belkin RockStar vs Mackie HM-4: Share One Headphone Feed
For five people following one audiobook from a tablet, the Belkin RockStar can do the job without an outlet. For a host and guest who hear the same interview but disagree about how loud it should be, choose the Mackie HM-4. It has one fewer headphone socket and four more volume knobs. Neither gives listeners different programs.
Best for
Families, teachers, musicians and small recording teams sharing an existing analog stereo output with several pairs of wired headphones.
Probably not for
USB-only headsets, wireless listening, recording several microphones, or musicians who each need a different balance of voice and backing track.
Specifications at a glance
| At the listening station | Belkin RockStar, black | Mackie HM-4 |
|---|---|---|
| Source connection | Attached 3.5 mm stereo plug | One 1/4-inch stereo TRS input jack |
| Headphone connections | Five 3.5 mm jacks with the attached plug feeding the hub | Four 1/4-inch stereo jacks |
| Volume controls on the device | None | One knob per headphone output |
| Power | Passive; no separate power supply | Included 12 V power adapter |
| What everyone hears | The same program; a second player can share the hub | The same stereo input, at individually chosen levels |
| Identify this version | F8Z274btBLK, analog five-jack splitter | HM-4, not the larger HM-400 or HM-800 |
As an Amazon Associate I earn from qualifying purchases.
Belkin RockStar 5-Jack 3.5 mm Audio Headphone Splitter, Black (F8Z274btBLK)
The attached plug connects to a headphone jack and leaves all five sockets free for listeners. Belkin also supplies a separate 3.5 mm auxiliary cable.
Pros
- Five people can hear one player without finding an outlet
- Small headphone plugs connect directly without a set of size adapters
Cons
- No knob to turn down just one listener at the hub
- Connecting a second player uses one of the five headphone sockets
Who it’s for: Choose it for shared playback where the source, listeners and cords stay close together and everyone is comfortable with one setting.
Check Belkin RockStar 5-Jack 3.5 mm Audio Headphone Splitter, Black (F8Z274btBLK) on Amazon Paid linkMackie HM-4 4-Channel Headphone Amplifier
One analog stereo input feeds four numbered headphone outputs. Each has a matching level knob, so a guest can turn down without changing the host’s volume.
Pros
- Separate levels accommodate different headphones and listening preferences
- Full-size headphone plugs connect directly at a recording or practice desk
Cons
- Requires its power adapter and an outlet
- No separate cue inputs for musicians who need different balances
Who it’s for: Choose it for a fixed desk with up to four listeners who agree on what to hear but not how loud to hear it.
Check Mackie HM-4 4-Channel Headphone Amplifier on Amazon Paid linkFive seats around one audiobook
Imagine a teacher setting out an audiobook for a small reading group. Four pupils sit around the table and the teacher wants the fifth pair of headphones to follow along. Plug the RockStar’s attached lead into the player and there are five sockets left. The Mackie has four headphone outputs. Its fifth large jack is marked INPUT: it brings the book into the box and cannot serve the fifth chair. Count the adult who monitors the lesson, not just the pupils on the register.
Set the player where one person can pause and go back a sentence without stretching a headphone cord. If one child wants to repeat a word while the others turn the page, the splitter cannot give that child a private rewind. Separate players make more sense for a self-paced lesson. Conversely, if the only job is for two people to watch the occasional movie and a two-way splitter you already own reaches both seats, the extra sockets buy nothing for that trip.
At a podcast desk, turn down the guest, not the recording
A guest puts on headphones, hears their own greeting and says it is too loud. Before touching a control, ask whether the host hears the same problem. On the HM-4, follow the guest’s cord to its numbered output and turn down the matching knob. Leave the microphone gain alone: that changes what the recorder receives, not just what the guest hears. A small label beside each knob can save the host from reaching behind the box in the middle of a good answer.
The Mackie still needs someone upstream to make the mix. If the guest hears the opening music but cannot hear the host at all, check what the recorder or computer sends out. The amp cannot restore a voice that never reached its input. If your starting point is a USB desk mic rather than a mixer, see our USB microphone comparison for the monitoring controls on two examples. Use an analog headphone output that already carries the material both people need. A USB cable alone cannot feed either box.
Match the plug at both ends of every cable
Start at the source end. On a laptop with a 3.5 mm headphone jack, the Belkin’s attached plug goes straight in. To feed the Mackie from that same laptop, plan for a stereo cable with a 3.5 mm plug at the laptop and a 1/4-inch TRS plug at the amp, or the equivalent cable and stereo adapter. The included Mackie power supply does not carry audio. A phone with only a digital port needs a compatible adapter that actually provides analog headphone audio before either product enters the picture.
Then look at the jack label, not just the metalwork. Some interfaces put two 1/4-inch sockets marked L and R next to each other for speakers. Each carries a single channel. Taking just L into the Mackie is not the same as plugging into a stereo headphone output, even if the plug fits perfectly. If the interface has a jack labeled PHONES carrying the mix you want, that offers a simpler path. Use a stereo cable, not a mono instrument lead that happens to be the right diameter.
Finally, count adapters on the listener side. Four people bringing small earbud plugs to an HM-4 desk means four stereo size adapters, not one for the group. Some full-size headphones already have the adapter in their pouch. Our Sony and Audio-Technica studio headphone comparison also covers cable styles: a cord that coils neatly by the host may pull taut at the guest’s chair. Lay the cords out with the chairs in their normal positions before deciding where the box should live.
A fifth socket cannot fix a volume disagreement
On the Belkin, turning down the tablet turns down the story for everyone. That does not mean each pair of headphones sounds equally loud. Earbuds that sit snugly in one listener’s ears can sound very different from a loose pair of headphones worn over another listener’s glasses. A reasonable starting point is the quiet setting preferred by the person who finds the sound loudest. If the others then cannot follow the dialogue, the group has a reason for individual level controls, not for adding a bigger passive splitter.
At a fixed editing desk, the Mackie lets the director listen quietly while the editor follows speech at a different level. Start with its knobs down and bring each up with the actual headphones connected. Matching the positions of the knobs is not the goal. To judge whether a music cue covers a word, listen to the same few seconds and discuss the word, not the number on either knob. If the recorded balance needs changing, make that edit in the project so the next person playing the file hears it too.
Two players, four musicians, or one phone call?
Belkin includes a loose auxiliary cable as well as the permanently attached lead. One use is to connect a second player to one of the five sockets, leaving four headphone jacks. For example, a language teacher could pause a story on the first player and play a pronunciation example from the second without unplugging the group. Keep the second player paused when it is not needed. The sockets do not let one pupil select the story while another selects the example; whatever is playing is shared.
The more revealing question at band practice is what the drummer means by “more click.” If the whole mix is too quiet, the HM-4 gives the drummer a knob. If the click is too quiet relative to the guitar, that knob raises both together. The band needs a separate mix output from a mixer or interface for the drummer, not four copies of the original mix. The same distinction matters if everyone except a vocalist wants the guide vocal muted for a rehearsal.
For a call, draw a line in each direction: sound going out to listeners, then voices coming back to the computer. These products address the first line. They are not a way to collect several headset microphones into a meeting. Keep a separate microphone or conferencing setup for that job. Once the input side is settled, the buying decision is small: a five-seat table with one shared level favors the RockStar; a powered four-seat desk where each person sets a level favors the HM-4.
Official sources and further reading
Sources reviewed on November 11, 2026. Prices, availability and terms can change; recheck before buying.
- Belkin: black RockStar model number, five AUX ports, attached lead and included auxiliary cable
- Mackie: HM-4 connections, individual volume controls and power supply
- Mackie owner’s manual: stereo source hookup and the numbered output controls
- Amazon US: black Belkin RockStar five-jack splitter Paid link
- Amazon US: Mackie HM-4 four-channel headphone amplifier Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.