Music & Hobby Comparisons · Reviewed November 9, 2026
BOSS RC-1 vs RC-5: Which Guitar Looper Fits Your Set?
Choose the RC-1 if you build the backing part yourself each time and only need to keep the last one. Choose the RC-5 if you want yesterday’s chord changes and today’s in different slots, or want a drum pattern to come back with a particular song. Both let you layer guitar parts; neither can mute an earlier layer like a separate track on a mixing desk.
Best for
Guitarists and bassists choosing a compact floor pedal for live overdubs, a practice vamp, or a collection of reusable backing parts.
Probably not for
Players who need two independently switchable loop tracks playing at once, or singers seeking a looper with a direct XLR microphone input.
Specifications at a glance
| Playing decision | BOSS RC-1 Loop Station | BOSS RC-5 Loop Station |
|---|---|---|
| What you can recall | The most recent phrase | 99 memories, each with one track and rhythm settings |
| Recording limits | About 12 minutes for the phrase | About 1.5 hours per track, 13 hours across all memories |
| What you see | Circular LED loop indicator and a level knob | Backlit LCD and a knob for memory selection or track level |
| Built-in accompaniment | No drum patterns | 57 rhythms, each with two variations, and seven kits |
| Connections beyond the audio jacks | External stop/undo control | External control, TRS MIDI in/out and USB for data transfer |
As an Amazon Associate I earn from qualifying purchases.
BOSS RC-1 Loop Station Pedal
A circular indicator follows the loop while one knob sets its playback level. The last phrase can survive power-down without choosing a destination or issuing a write command.
Pros
- A visible loop cycle helps you find the top of a phrase
- Retains a practice vamp between sessions with no memory list to manage
Cons
- Making room for a different phrase means giving up the current one
- No onboard rhythm section or USB loop backup
Who it’s for: For the player who likes to build a part in front of an audience or work on a single tune for a few days.
Check BOSS RC-1 Loop Station Pedal on Amazon Paid linkBOSS RC-5 Loop Station Looper Pedal
Each memory holds a single recorded track along with its rhythm setup. The RC-5 also supports computer backup and import of compatible backing loops.
Pros
- Can keep separate song ideas and bring back the associated rhythms
- USB backup and MIDI sync suit a rig shared with a computer or drum machine
Cons
- Changing memories before writing can discard a new take
- The memory bank does not give overdubs independent playback controls
Who it’s for: For a teacher, writer or performer who needs to retrieve several different pieces without playing them all in again.
Check BOSS RC-5 Loop Station Looper Pedal on Amazon Paid linkWhat should still be there on Wednesday?
Suppose you record the verse changes for a new song on Monday. On Tuesday your teacher gives you a different progression to solo over. On Wednesday you want the verse back. Both pedals can handle the actual playing time. Only the RC-5 can keep both recordings on the pedal as two choices. On the RC-1 you can leave the verse intact and play along with it as often as you like, but you cannot file it away on the pedal while you start a fresh loop.
Put some numbers to that distinction. Four bars of 4/4 at 80 beats per minute take 12 seconds. A player who spends half an hour trying melodies over that progression still needs only a 12-second backing phrase, not half an hour of recording space. For this player, the RC-1’s roughly 12-minute limit is unlikely to be the problem. A teacher who needs that same short exercise ready in five different keys has a reason to want separate memories before filling even one minute of audio.
Build a first pass you actually want to repeat
Try an imaginary two-bar arrangement: a low A on beat one, muted strums through the second bar, then a higher answer played live. Start the recording at the first A and close the loop where the next A would land. Let the pedal supply that next downbeat. If you record the first note again just before closing the loop, you may hear an extra attack every time it turns over. A bigger memory bank does nothing for that particular mistake.
What happens on that closing press matters. In the RC-1 manual’s default sequence the pedal goes straight into overdubbing. That is handy if the next note is meant to become a permanent harmony. If you want to audition a melody over untouched chords, use its alternative recording order, which goes to playback first. The basic sequence in the RC-5 manual already goes from recording to playback. Look at the indicator before adding the answer: is the pedal capturing it, or are you the only one playing it this time?
For unaccompanied practice on the RC-1, a separate click can give you a count-in. The Korg MA-2 and Seiko SQ50V metronome comparison is useful if you want that reference independent of the guitar signal. On the RC-5 you can set a tempo and turn on a built-in rhythm instead. A drummer and bassist at rehearsal may prefer neither: you can make the first pass with the band and leave the rhythm off.
Ninety-nine memories are not ninety-nine mixer channels
Imagine a loop made from a bass figure, clipped chords and a high harmony, in that order. For the bridge you want to drop the chords but leave the bass and harmony playing. Those overdubs share a track on either pedal. Undoing the most recent addition is useful when the new harmony is wrong; it is not a way of reaching back past that harmony to mute just the chords. Stereo inputs do not change that arrangement into three independently controlled parts.
You can arrange around the limitation. Record only the bass figure and play the chords live, then stop strumming for the bridge. If the harmony also has to continue without your hands, consider a looper with separately controlled tracks. An RC-5 memory containing a different, prepared backing part is another option when you can change between sections as rehearsed. It is not the same as sliding one part out of a mix while all the others continue under your fingers.
Decide which sound the looper should remember
Sketch the path from guitar to amp before making room on the board. With an overdrive before the looper, you can record clean chords with the drive bypassed, finish the loop, then engage the drive and solo over the clean recording. Put the overdrive after the looper and that same switch affects both the recorded chords and the incoming solo. The BOSS DS-1 and SD-1 gain pedal comparison explains the difference between those sounds; placement determines which parts get them.
The reverse arrangement is useful too. When comparing settings on a drive pedal, put the looper ahead of it and record a phrase with a softly picked note, a hard attack and a chord that rings out. The same performance now passes through each setting, and both hands are free to turn knobs. Either Loop Station does this job. For one guitar and one amp, use the A/mono audio connections. A second pair of audio jacks is useful for an existing stereo setup, not an extra purchase a mono rig needs.
Give each recording a home before changing songs
On the RC-1, stop the loop before packing up and let the indicator finish its activity before disconnecting power. BOSS says the recorded phrase is retained, but warns against removing power while the indicator rotates or blinks. Treat the pedal as a single working copy. If an idea would be hard to recreate, capture its output with your recording setup before clearing it for another piece. There is no USB port on this model from which to retrieve the old phrase later.
The RC-5 calls for a different habit. Before changing memory or powering down, open the write function with SETUP and MEMORY, choose WRITE, check the destination number, and confirm. For a short set, you could use 01 for the opener, 02 for a chorus vamp and 03 for the encore. Put the numbers on the set list, then deliberately recall each one at rehearsal. A memory that still contains an earlier take is easier to discover there than when the singer has already counted in.
Look at the last bar before you buy
If you have to finish with a band on one exact beat, rehearse the stop as well as the start. With their basic pedal controls, both models use two quick presses to stop playback. Both support an optional external footswitch for a separate stop command. Leave space for that second switch and its cable if you want a one-press ending. Buying the RC-5 for its extra memories does not by itself put a second switch under your foot.
Check the model printed on the unit and the accessories listed in the particular offer. The comparison is between the stand-alone RC-1 and RC-5; neither choice assumes an external switch, MIDI cable or AC adaptor in the box. For a player making one fresh loop on stage, the RC-1 and space for a stop switch may suit the show better. If the guitarist needs three prepared introductions in a specific order, the RC-5’s numbered memories solve a problem the extra switch never will.
Official sources and further reading
Sources reviewed on November 9, 2026. Prices, availability and terms can change; recheck before buying.
- BOSS: RC-1 loop display, retained phrase, connections and accessories
- BOSS RC-1 owner’s manual: recording order, stop, undo and power-down
- BOSS: RC-5 track and memory counts, rhythms, USB and MIDI
- BOSS RC-5 owner’s manual: single-track memory, recording limits and write operation
- Amazon US: stand-alone BOSS RC-1 Loop Station Pedal Paid link
- Amazon US: stand-alone BOSS RC-5 Loop Station Looper Pedal Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.