Home Office Comparisons · Reviewed November 8, 2026
Brother TZe-231 vs TZe-S231: Which Tape for Your Bins?
Use TZe-231 for a smooth, flat label spot. Reach for TZe-S231 when the label has to live on a rough or uneven face, such as a pebbled equipment case. Both cassettes give you an 8 m length of laminated tape with black lettering on a 12 mm white strip. The extra S buys a different adhesive, not larger type, a longer roll or a more legible label.
Best for
Someone refilling a compatible Brother P-touch to mark storage bins, file boxes, drawers or equipment cases that will keep their identifiers.
Probably not for
A printer that does not take 12 mm TZe, a temporary name on borrowed equipment, or a label that needs to wrap around a thin cable.
Specifications at a glance
| Cassette detail | TZe-231 | TZe-S231 |
|---|---|---|
| Adhesive | Standard | Extra strength |
| Surface Brother recommends | Smooth and flat | Rough or uneven |
| Face and print | Laminated; black on white | Laminated; black on white |
| Tape width | 12 mm (0.47 in) | 12 mm (0.47 in) |
| Length in the linked pack | One 8 m (26.2 ft) cassette | One 8 m (26.2 ft) cassette |
| Example compatible printer | Brother PT-D220 | Brother PT-D220 |
As an Amazon Associate I earn from qualifying purchases.
Brother TZe-231 standard adhesive tape, one 12 mm cassette
The general-purpose choice for a flat drawer front or a smooth label recess on a tote. Brother prints the text beneath a protective layer. That protects the lettering; it does not make standard adhesive the right choice for every plastic surface.
Pros
- Matches the smooth panels common on file drawers and storage boxes
- Keeps the same black-on-white appearance as a neighboring extra-strength label
Cons
- Not the adhesive Brother recommends first for a rough or uneven face
- A standard adhesive label is not a promise of clean removal
Who it’s for: Choose it when there is a flat patch large enough for the whole strip. If a rib runs through that patch, first see whether moving the label solves the problem.
Check Brother TZe-231 standard adhesive tape, one 12 mm cassette on Amazon Paid linkBrother TZe-S231 extra strength tape, one 12 mm cassette
The strong-adhesive counterpart for a textured case or uneven storage-bin wall where there is no smooth label panel. It produces the same size and color strip as TZe-231. You can switch cassettes without redesigning an inventory system around a different visual format.
Pros
- Designed for surfaces that are less smooth than a conventional label panel
- Can identify a textured case while matching standard labels elsewhere on the shelf
Cons
- Does not turn a hinge, open gap or deep groove into a continuous surface
- Not the flexible self-wrapping tape Brother specifies for wires and cables
Who it’s for: Choose it for a persistent identifier on a textured area. If the contents change weekly or the owner forbids adhesive, attach a changeable card to the storage location instead.
Check Brother TZe-S231 extra strength tape, one 12 mm cassette on Amazon Paid linkChoose a spot before you choose the cassette
Slide the empty box into its normal place and stand where you would look for it. The lid may offer a large, smooth area, but a label there disappears as soon as you stack another box on top. At the other extreme, the visible wall might be all molded ribs except for one small rectangle beside the handle. The useful measurement is the height and length of that rectangle, not the outside dimensions of the box. A strip of plain paper cut 12 mm wide is enough to check the fit before you print.
Run a fingertip across the intended position. For a smooth plastic panel that supports both ends of the label, standard TZe-231 is the straightforward choice. For a continuously pebbled surface, consider the S231. A gap is different from a texture: if the words would bridge a recessed latch, the middle of the strip would have nothing to stick to. Shift the label to one side or shorten the wording. An extra-strength backing cannot create contact across empty space.
If the filing system itself is still a purchase decision, the Sterilite 1871 and 1868 file box comparison distinguishes the portable letter-file carrier from the larger letter/legal box. For either style, put the identifying code on the base if lids can get exchanged. Put a duplicate on the lid only if it also helps someone find the right box from above.
A scuffed word and a lifting corner are different problems
Examine an old label if you have one. Is the writing hard to read, or is the entire strip coming away with perfectly readable lettering? Lamination concerns the front of the label; adhesive concerns its contact with the object. Both of these tapes are laminated. Changing from standard to strong adhesive is a reasonable response to a difficult surface. It does not address a label hidden behind a handle, or a line of text too small to read without pulling the drawer open.
Look for the first point of failure. If a corner sits exactly where a thumb catches the label every time the case opens, try a different spot before changing stock. If yesterday’s strip came away with flakes of old paint attached, the weak point may be the finish itself. Do not put a fresh label over the loose patch. Start on clean, dry, sound material and check a small inconspicuous spot if the finish matters. Neither cassette is a good reason to experiment on a borrowed or collectible object.
For kit that travels in a hard case, lift the closed case by its handle and set it down in its usual orientation. A code visible on the shelf can end up on the floor when the case is standing upright. Sometimes the useful purchase is a second short label from the same roll for another face. That solves a visibility problem that more adhesive on the first label would leave untouched.
Give the container a name that survives a change of contents
Picture a school lending out presentation kits. The rigid case stays in service for years, but a projector model or the staff member responsible for it may change next term. Print a short permanent identifier such as “AV 04” on the textured shell using S231. Keep the list of cables, current borrower and return date on a card inside, or in the checkout record. You can swap a cable or correct a name without scraping a perfectly legible label off the case.
Back in the office, the smooth shelf beneath that case can take a standard tape label with the same identifier. That shelf label answers a different question: where should a volunteer put the kit when the shelf is empty? Read the two labels as a pair. If you want the shelf to take any projector case, label the shelf “Projectors” instead of assigning an individual number. There is no benefit in matching codes that will force an unnecessary rearrangement after every loan.
The reverse situation is a bin reassigned every Friday. There, even standard adhesive can be the wrong solution. Put the permanent category on the shelf and slip a handwritten card into a holder on the bin. If the only thing you need to change is a date, give that date its own card. Separating the stable words from the variable ones is more useful than trying to find a supposedly temporary setting on either cassette.
Check the printer, not just the half-inch description
The number to find on your machine or in its supply list is 12 mm TZe. Two label makers can print on nominal half-inch tape while using entirely different cassettes. The Brother PT-D220 and DYMO LabelManager 160 comparison covers that distinction if you share a supply cupboard with another department. Brother lists both the TZe-231 and the TZe-S231 for the PT-D220. The DYMO in that guide uses D1; it does not become compatible just because the white strip looks the same.
The 12 mm figure is the tape width, not a promise of 12 mm letters. For example, Brother gives the PT-D220 a maximum print height of 9 mm. If “Presentation accessories” is illegible from the aisle, changing to extra-strength tape will not enlarge it. Try “AV cables,” use the available length for a larger single line, or move the detailed contents to an insert. A different cassette width is only an option if the printer accepts it and the surface can accommodate it.
A round surface also deserves a closer look. A curved rigid case is not the same job as wrapping a narrow lead so the tape adheres to itself. Brother names a separate Flexible ID family for cable wraps. If the real destination is the lead rather than its case, go back to the printer’s compatible-media list before choosing by the word “strong.”
Estimate the run in tape length, not labels per roll
Plan a first batch around one real line of text. Suppose the finished shelf identifier, including the margins you intend to keep, is 60 mm long. Forty finished labels account for 2,400 mm, or 2.4 m, before any extra leader, offcuts or reprints. A second identical label for the other side of every box doubles that finished length to 4.8 m. This is a project estimate, not a promised yield. Both linked packs start with 8 m, so changing adhesive makes no difference to that arithmetic.
Margins and feed settings belong to the printer. On the PT-D220, Brother describes a Chain Print option for a run of different labels and tells users to feed the tape before making the final cut. Follow the instructions for your model. For a mixed job, print the shelf labels together on standard stock, then switch once and do the case labels on the strong stock. Keep the cassette designation beside each group on the work list; a loose strip of black text on white will not tell the next volunteer which adhesive is on the back.
Official sources and further reading
Sources reviewed on November 8, 2026. Prices, availability and terms can change; recheck before buying.
- Brother: standard adhesive, flat-surface guidance, dimensions and one-cassette carton
- Brother: extra-strength adhesive, rough-surface guidance, dimensions and one-cassette carton
- Brother USA: construction and properties of the laminated print surface
- Brother: PT-D220 compatible tape part numbers, maximum print height and Flexible ID distinction
- Brother support: PT-D220 margins, chain printing and final feed before cutting
- Amazon US: Brother TZe-231 standard black-on-white 12 mm x 8 m, pack of one Paid link
- Amazon US: Brother TZe-S231 strong-adhesive black-on-white 12 mm x 8 m, pack of one Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.