Laynie Hasan.

← All offer guides

Music & Hobby Comparisons · Reviewed November 12, 2026

D’Addario EJ73 vs EJ74: Light or Medium Mandolin Strings?

Buy EJ73 if you want less resistance across all four pairs of strings and your mandolin takes light gauges. Buy EJ74 if you want a firmer response or are replacing a known set of D’Addario mediums. The two sets share their wrap material and loop ends; what changes is the diameter of every string, not just the high E.

Best for

Players restringing a standard eight-string mandolin in GDAE tuning who can use loop ends and want a complete uncoated phosphor bronze set.

Probably not for

Ball-end-only instruments, mandolas, octave mandolins, or an older instrument whose recommended gauges and condition are unknown.

Specifications at a glance

Manufacturer specifications for the exact versions compared
One standard setEJ73 lightEJ74 medium
High E pair, diameter of each0.010 inch0.011 inch
A pair, diameter of each0.014 inch0.015 inch
D pair, diameter of each0.024 inch0.026 inch
Low G pair, diameter of each0.038 inch0.040 inch
Wound stringsUncoated, roundwound phosphor bronzeUncoated, roundwound phosphor bronze
Count and attachment8 strings, loop ends8 strings, loop ends

As an Amazon Associate I earn from qualifying purchases.

D’Addario EJ73 phosphor bronze mandolin strings, light 10-38, one set

Two strings of each gauge make up the four courses. This set has the slimmer string and the lower published tension at every pitch in the comparison.

Pros

  • Less resistance on both melody strings and chord shapes
  • Matches an existing uncoated EJ73 setup without changing gauges

Cons

  • Less resistance for a player who likes to dig into a pair with a pick
  • Does not preserve the gauges of an instrument set up with EJ74

Who it’s for: An instrument set up for lights, or a player whose maker allows lights and who wants a less resistant feel throughout the set.

Check D’Addario EJ73 phosphor bronze mandolin strings, light 10-38, one set on Amazon

D’Addario EJ74 phosphor bronze mandolin strings, medium 11-40, one set

The plain E and A strings each grow by a thousandth of an inch over the lights. Each wound D and G grows by two thousandths.

Pros

  • More resistance under a firm picking stroke
  • Exact model Weber names for its standard mandolins

Cons

  • Higher listed tension on every course
  • Not a drop-in recommendation for an unfamiliar vintage or light-gauge-only instrument

Who it’s for: A player replacing the same medium set, or one who wants firmer strings and knows their instrument accommodates this gauge.

Check D’Addario EJ74 phosphor bronze mandolin strings, medium 11-40, one set on Amazon

A spare for Saturday, or a change in feel?

Suppose you play mandolin at a Saturday jam. Your usual strings feel right, but you have no spares in the case. Buy the set you already play. If the empty packet says EJ73, choose EJ73; if it says EJ74, choose EJ74. An unexpected string change between tunes is a poor time to discover whether you prefer a firmer high E. Keep the packet with the instrument, especially if other people sometimes pick up supplies for you.

Now suppose that same mandolin feels good with open chords but you would like the strings to give a little more during a whole verse of fretted double stops. If it wears EJ74 and the maker allows light strings, EJ73 gives you a specific change to make: both strings under each fingertip will be thinner. You keep the same type of winding on the bass strings, the same attachment and the same tuning. You need not also guess whether a different alloy or coating is responsible for the difference you feel.

For a gift, ask for a photo of the packet or a note from the repair shop that last set up the instrument. A photo of the front of the mandolin can identify its shape, but not the thickness of the strings the player chose. A new player who inherited a well-loved medium setup may reasonably want mediums. Someone who has played for twenty years may prefer lights. Years played will not tell you what to order.

Read the four gauges behind the two numbers

The numbers on the front give the two ends of the range in thousandths of an inch. They run from the thinnest string to the thickest, the opposite of the familiar low-to-high tuning names G, D, A, E. On the EJ73, the E, A, D and G diameters are .010, .014, .024 and .038. On the EJ74 they are .011, .015, .026 and .040. Each number describes one string. There are two matching strings tuned to the same note in each course, so one packet does the whole instrument.

The high E illustrates why a difference that looks tiny on the label is worth noticing. D’Addario lists 19.2 pounds of tension for one EJ73 E at the stated pitch and 23.2 for one EJ74 E. The pair therefore accounts for an eight-pound difference in the maker’s figures. That is tension along the strings, not the force your finger must apply to fret them. String height and where you place your fingertip also matter. Use the chart to see the direction of the change; do not read it as a measurement of your hand.

The two plain treble courses are also why the wording “phosphor bronze” can be puzzling when you open the packet. It refers to the winding on the lower courses. A smooth, plain E beside a visibly wound G is expected in both sets. If one G breaks, a loose string marked .038 is the gauge match for EJ73 and .040 for EJ74. Do not borrow a different diameter from the other set merely because the note printed next to it is also G.

Let a passage you play guide the choice

Think about a tune in which the pick alternates across the A and E pairs. At the point where the tune crosses onto E, do you want the pair to yield a little more, or would you like something firmer under the pick? The first preference points toward EJ73; the second points toward EJ74. Neither preference belongs exclusively to melody playing. Two players taking the same tune at the same tempo can disagree because one uses a short, shallow stroke and the other takes the pick farther through the strings.

Rhythm parts give you a different question. A clipped offbeat chord depends on planting the fingers and releasing pressure in time. If you like how the current strings meet the pick but struggle to sound both members of a pair cleanly, listen to that pair on its own before blaming all eight strings. One finger landing too far from the fret can spoil an otherwise comfortable chord. If every course genuinely feels too resistant and the setup is sound, the lighter set addresses a broader complaint.

Keep your familiar pick when you change gauges. A pick that bends readily adds another source of give between your fingers and the strings. If that is what you actually want to change, the Dunlop Tortex pick thickness comparison explains the distinction using two thicknesses of one shape. It is easier to decide whether you like the new strings when the pick in your pocket is still the old one.

Check what the instrument is built to take

Weber supplies a useful real-world reference: its FAQ specifies EJ74 for mandolin, but lists other sets for mandola, octave mandolin and mandocello. For the owner of a standard Weber mandolin seeking its stated strings, there is a concrete reason to choose EJ74. For a shopper holding an octave mandolin, the same chart is a reason to put both packs down. Two instruments can have eight strings and share the letters GDAE without using the same pitches, scale length or string set.

Look at the tailpiece as well as the name on the headstock. Both of these sets have a wire loop at the end of each string. If the instrument calls for ball ends, the lighter set does not solve the mismatch; it has the same type of ends as the medium. For an unfamiliar older mandolin with no setup record, ask a repairer what the particular instrument can take. Neither the word “light” nor a recommendation for a modern instrument establishes that an older one is ready to string up.

Keep the bridge position and the pairs straight

Before removing anything, photograph where the bridge sits and how the strings attach. On mandolins with a floating bridge, string tension helps hold it in place. Taking off all eight strings together can turn a simple replacement into a search for the original bridge position. Follow the instrument maker’s procedure. Weber, for example, recommends working one course at a time. Keep the unused strings identified as you work; the difference between the two plain treble diameters is easier to read on the packet than to judge by sight.

Bring each member of a course to pitch individually before listening to the two together. If one is sharp and its partner flat, changing the thickness of both will not fix the disagreement. A chromatic tuner can help you isolate each note; the D’Addario Micro and Eclipse clip-on tuner guide compares two display arrangements if your current tuner is awkward to see. Once the pairs agree, return to the passage that prompted the change. The useful question is whether you prefer playing it this way, not whether you can hear someone else call the strings light or medium.

Official sources and further reading

Sources reviewed on November 12, 2026. Prices, availability and terms can change; recheck before buying.

Commission disclaimer

This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.