Laynie Hasan.

← All offer guides

Music & Hobby Comparisons · Reviewed November 8, 2026

High or Low G? D’Addario Tenor Ukulele Strings Compared

Open the piece you most want to play. If the fourth string carries a high, ringing note above middle C, choose D’Addario EJ99T. If it carries a bass line below middle C, choose EJ99TLG. Both are four-string Pro-Arté Carbon sets for tenor ukulele. The first three strings match in pitch and gauge; changing the fourth can turn the same printed zero in a tab into a note an octave away.

Best for

A four-string tenor ukulele player replacing a known set, learning a specific fingerstyle arrangement, or choosing how to voice chords behind a singer.

Probably not for

A player shopping for a baritone DGBE set, a single replacement string, or a metal-wound low G. Neither of these sets supplies those.

Specifications at a glance

Manufacturer specifications for the exact versions compared
Tenor ukulele set detailEJ99T: high GEJ99TLG: low G
Open notes, fourth string to firstG4, C4, E4, A4G3, C4, E4, A4
Fourth-string diameter0.0224 inch0.0413 inch
Lowest open note in the setC4, third stringG3, fourth string
First, second and third gauges (A, E, C)0.0205, 0.0260 and 0.0319 inch0.0205, 0.0260 and 0.0319 inch
Fourth-string tension at listed pitch11.7 lb at G49.9 lb at G3
Construction and endsFour fluorocarbon strings; tie-endFour fluorocarbon strings; tie-end

As an Amazon Associate I earn from qualifying purchases.

D’Addario Pro-Arté Carbon EJ99T tenor ukulele strings

The standard tenor set puts G4 under the thumb as an open note, just a whole step below the open A. That lets a picked phrase move between G and A while both strings ring.

Pros

  • Matches arrangements that use the open fourth string for a high melody note
  • Keeps the bottom note of an open-position C chord on the C string

Cons

  • Cannot play notes below middle C in its specified tuning
  • An alternating thumb pattern on the two outer strings does not supply a low G bass note

Who it’s for: Choose EJ99T to preserve the sound of an existing high-G tenor or to play the high-G part in an ensemble. The word “Tenor” on this model does not mean low G.

Check D’Addario Pro-Arté Carbon EJ99T tenor ukulele strings on Amazon

D’Addario Pro-Arté Carbon EJ99TLG tenor low-G ukulele strings

The low-G set gives the fourth string five lower pitches before it meets the open C at its fifth fret. Its thicker G is plain fluorocarbon, not a metal winding around a core.

Pros

  • Supplies open G3 for an alternating bass or a low pickup note
  • Leaves the A, E and C strings at the same published gauges as EJ99T

Cons

  • The thicker fourth string may not seat properly in a slot cut for a thin high G
  • High-G tablature can put a melody note in the wrong octave without a fingering change

Who it’s for: Choose EJ99TLG for low-G tablature or a specific bass part once you know the instrument accommodates its fourth string. For a wound low G, look outside this pair.

Check D’Addario Pro-Arté Carbon EJ99TLG tenor low-G ukulele strings on Amazon

Listen to the open strings before you order

Hold your tenor as you would to play it and pluck the strings in order, starting with the fourth, the G. On the high-G set the pitch drops when you go from G to C, then rises through E to A. That dip is what players mean by reentrant tuning. On the low-G set the four notes climb in order. If you like the way your present instrument sounds and simply want fresh strings, those first two plucks tell you more about which set to buy than the size of the body does.

A tuner that displays just note letters can say G for either fourth string. The little number next to the note, if your display has one, identifies the octave: G4 for EJ99T and G3 for EJ99TLG. For a second reference, play the third fret of the E string on an instrument already in tune. That note is G4. A correctly tuned high G matches it; a correctly tuned low G sounds an octave beneath it. Listen to the existing setup before removing its strings, not halfway through the change.

If you are buying for someone else, ask for a picture of the old packet or the tuning named at the top of a favorite arrangement. A photo of the whole ukulele may establish that it is a tenor, but a clear unwound fourth string can be either version. For a shared instrument, make a note inside the case indicating which G the group uses. Then someone replacing strings before rehearsal can restore the familiar tuning without having to identify the old set by eye.

Read the fourth line of the tab

Tablature tells you which string and fret to play. In ordinary four-line ukulele tab, the bottom line on the page is the fourth string, and a zero means to play it open. Try a two-note example: zero on the fourth string followed by zero on the third. With EJ99T you hear G4 falling to C4. With EJ99TLG you hear G3 rising to C4. Your hands have done exactly the same thing twice, yet the phrase travels in opposite directions. Changing the tempo will not make the second phrase match the first.

For a low-G melody, circle any notes below middle C in the notation. The low set provides G3, G sharp, A, B flat and B before it reaches C4. You cannot get those five pitches by moving higher up the frets on the high-G set. You could take the entire phrase up an octave, but if another player is already carrying the upper part in a duet, that puts both of you in a different relationship. Buying the tuning named in the score saves rewriting the arrangement.

Going the other way is not quite as simple as finding another G. On the low set you can still reach G4 at the third fret of the E string. But suppose the arrangement wants you to hold the open E underneath that G. You cannot sound both notes on the E string at once. That is the point of some high-G fingerings: the open strings keep ringing across each other. Look for that kind of overlapping pair before deciding a high-G arrangement will transfer unchanged.

Hear what happens to a familiar C chord

Make an ordinary C chord: leave the G, C and E strings open and press the A string at the third fret. With high G the lowest sounding note is C4, even though your hand may brush the G string first. With low G the lowest note is G3. The chord still contains C, E and G, and the chord shape has not moved. What changed is which chord tone sits at the bottom. A page of chord boxes can work with either tuning while the accompaniment sounds quite different.

To decide what you want behind a vocal, pick a verse that leaves a little space between sung lines. Imagine a low G on beat one in that space, then a strum on beat two. EJ99TLG can put the two events in separate registers. With EJ99T the thumb note sits inside the upper cluster instead. If you can borrow both tunings at rehearsal, ask someone to sing the same verse twice and listen from across the room. Keep the rhythm fixed; the Korg and Seiko metronome comparison covers two ways to mark a steady beat.

Check the fourth-string slot, not just the tuning

The low G in this pair is 0.0413 inch across, versus 0.0224 inch for the high G. That is a substantial change where the string crosses the nut, the small slotted piece at the headstock end of the fingerboard. Even an instrument previously strung with a low G may have carried a thinner, wound version. Give the actual gauge to the shop or instrument maker when asking about fit. “It already had a low G” does not establish that this particular unwound string will sit correctly.

D’Addario lists less tension for its thicker fourth string at G3 than for the thin string at G4. Those numbers describe each string at the intended pitch, not permission to wind the low string up to the high octave. Keep the two packets separate, follow the bridge instructions for your instrument, and stop if the new string will not seat. Do not start widening a slot on the assumption that all low-G sets need the same clearance. A repairer can assess that instrument before material is removed.

When bringing a fresh set up to pitch, have the target octave in front of you as well as the note letter. The D’Addario clip-on tuner comparison looks at screen position and mounting if the problem is reading a tuner while your hand is on the peg. If the notes on a lesson recording still sound unlike yours once the open strings are in tune, check the lesson’s fourth-string octave before turning the peg again.

Choose a packet for the part you will play

For a class that teaches tunes by ear, ask the teacher to play the opening G and C slowly. Match their direction if you want to copy the demonstrated fingering without translating. For a solo book that labels arrangements individually, check the pieces you actually intend to learn: one low-G arrangement near the back need not determine what goes on the instrument for the other chapters. A player who wants only to strum chords can make the decision by ear; a player responsible for a written bass part has a particular note to deliver.

At checkout, look for Carbon, a four-string set and the full model code. EJ99T is the standard tenor version; EJ99TLG is specifically Tenor Low G. The question is not whether a tenor ought to sound deep. It is whether the fourth string in your music needs to ring beside the open A, or start below the open C.

Official sources and further reading

Sources reviewed on November 8, 2026. Prices, availability and terms can change; recheck before buying.

Commission disclaimer

This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.