Music & Hobby Comparisons · Reviewed November 1, 2026
DGT1001 vs DGT1002: Which Chess Clock for 5+0 or 5+3?
If a five-minute game means five minutes per player and nothing more, either clock works. Pick the DGT1001 if you also want to start at zero and measure thinking time. Pick the DGT1002 Bonus if your games say 5+3: the three seconds belong to the player on every move, and the 1001 cannot add them. If the rules say delay, neither is the right clock.
Best for
Home players, coaches and club organizers who know the time control they will use and want a single clock beside a two-player board.
Probably not for
Players who need US delay, a move counter or an automatic change to a second time period. Check the actual time control before buying for an event.
Specifications at a glance
| At the board | DGT1001 | DGT1002 Bonus |
|---|---|---|
| Single clock compared | Black/white, DGT SKU 23014 | DGT SKU 23016; see color note below |
| Five minutes each, no increment | Set 5:00 | Set 5:00 and a zero bonus |
| Three seconds added per move | No increment setting | Set a 0:03 bonus |
| Measure elapsed thinking time | Set 0:00 to start counting up | Documented modes are countdown and bonus |
| A 12-minute base time | Not selectable: 10, then 15 minutes | Selectable: one-minute steps from 10 to 30 minutes |
| US delay / multiple periods | Neither | Neither |
| Size and power | 155 x 60 x 42 mm; one AA battery | 155 x 60 x 42 mm; one AA battery |
As an Amazon Associate I earn from qualifying purchases.
DGT1001 Universal Game Timer, black/white, one clock
Think of the two displays as separate accounts of time spent. In countdown mode you can spend a minute finding a plan, see the remaining balance, then decide whether another long think is affordable. In count-up mode there is no starting balance to spend: you and a partner can find out how long you needed without either of you racing a deadline.
Pros
- Starts at zero for practice or counts down from a selected base time
- Can show how far past zero a player has gone after a countdown
Cons
- Cannot add an increment to reward a quick move
- Starting times above ten minutes are not all selectable minute by minute
Who it’s for: The better fit for a parent who wants ten minutes each on game night and a stopwatch for two on lesson day. The black/white model here is the single timer, not the other blue/white colorway or a set of pieces.
Check DGT1001 Universal Game Timer, black/white, one clock on Amazon Paid linkDGT1002 Bonus Chess Timer, SKU 23016, one clock
This is the one to bring when a friend asks for three minutes plus two seconds per move. Enter the base time and the bonus separately; the clock remembers the settings for a rematch. On another night the same unit can play three minutes with no increment, provided you return the bonus to zero.
Pros
- Adds a fixed Fischer increment before each move, including the first
- Accepts a 12-minute base as well as round numbers such as 10 and 15
Cons
- Increment cannot reproduce US delay, where unused seconds do not accumulate
- DGT lists no count-up-from-zero practice mode for this model
Who it’s for: Choose it for a pair that plays both 5+0 and 5+3. DGT describes the finish as brown; the US Amazon listing calls it black. The numbers resolve the model, not the shade: the listing and DGT both identify the timer by the barcode ending in 821509. If the finish matters to you, confirm it with the seller.
Check DGT1002 Bonus Chess Timer, SKU 23016, one clock on Amazon Paid linkFive minutes each is not a five-minute booking
For 5+0, each side gets five minutes for the entire game. Start with both displays at five. Only one side runs at a time: make a move, press the button on your side, and the other side begins spending its time. If White uses four minutes and Black uses three, seven minutes of playing time have passed. A kitchen timer started at five minutes would have rung two minutes ago without telling you which player used how much.
For a club with a twenty-minute gap between activities, two consecutive 5+0 games could use all twenty minutes just on the moves, leaving nothing for setting up or putting pieces back. With 5+3 even that ceiling disappears because moves add time. If the room itself has to empty at a fixed hour, use a separate wall-time alarm. The related OXO and TempPro timer comparison is for that shared deadline; it is not a substitute for alternating the two player clocks.
What happens to three seconds you do not spend?
Take a position where you have 20 seconds left before the allowance for your next move. On the 1002 with a three-second increment, that turn starts with 23. If you take one second to recapture a piece, you leave 22 on your side. Those two saved seconds can go toward a harder decision later. With a three-second US delay, that same one-second recapture would leave the original 20, not 22. With neither bonus nor delay you would be down to 19.
There is a useful setup check here. For 5+3, enter five minutes as the game time, then press the power button again to see the bonus setting and enter three seconds. The letter B indicates a nonzero bonus. DGT applies that allowance from the first move; do not enter 5:03 as the base or subtract three seconds to compensate. For tomorrow’s 5+0 game, check the bonus field again. The saved setting is convenient until two players assume five on the base display means there is no increment.
A practice exercise with no flag to beat
Set up a king and pawn ending and let two players play it out on the 1001 with the starting time at zero. Each display now accumulates only the time its player is on move. Pause when the players agree the exercise is over. A reading of six minutes on one side and two on the other says something a stopwatch in the middle cannot: most of the eight minutes belonged to one player. It does not say whether that time was well spent. Ask which position consumed it, then set those pieces up again.
For a second attempt, switch to a countdown so each player has a target. The 1001 can continue counting upward after a side reaches zero, with a flag marking the expiry. That is useful if your question is whether a player missed a target by seconds or minutes. It is not extra legal time by itself; agree before the exercise whether reaching zero ends play or whether the position should be finished for discussion.
Twelve minutes is a reason to read the fine print
Suppose a coach wants twelve minutes a side so a fixed-time practice game uses no more than twenty-four minutes of playing time. The English 1001 manual lists five-minute steps from ten minutes to two hours. Its next setting after ten is fifteen: choosing it would make thirty minutes of play possible, not twenty-four. The 1002 manual specifies one-minute steps from ten through thirty. Choose twelve and set the bonus to zero if the twenty-four-minute limit is the point of the exercise.
A different request may rule out both clocks even though the number on the flyer looks ordinary. For example, ninety minutes for forty moves followed by another thirty minutes is not the same as two hours for the whole game. A player who needs one hundred minutes to reach move forty has crossed the first deadline. Both clocks have a single period, and neither counts moves. Giving everyone two hours at the start erases the very checkpoint the organizer specified.
Set up the board before the first pair sits down
Leave room for a 155 mm length of clock beside the board and for both players to reach the top controls without leaning across a line of pieces. Both units have the same specified case and display dimensions, so switching models will not solve a cramped layout. On either clock, pressing an end button starts the opposite side; the center play/pause control starts the left side when beginning a game. Let the players try a move and a handoff before resetting for the actual round. A running clock on the wrong side is much easier to notice in a trial than halfway through an opening.
For several boards, write the base time and any increment on the pairing sheet, for example “5 minutes each, add 3 seconds per move.” A spare player can check each clock against one line of text instead of trying to remember which tables were meant to use bonus. If you are also carrying blank score sheets, the related Saunders storage clipboard guide compares ways to separate unused sheets from returned ones. For the clock itself, buy for the most demanding setting you actually play: count-up favors the 1001, an increment favors the 1002, and a delay calls for a different model.
Official sources and further reading
Sources reviewed on November 1, 2026. Prices, availability and terms can change; recheck before buying.
- DGT: DGT1001 timing modes, case, screen, power and colors
- DGT Shop: black DGT1001 SKU 23014 and EAN 8717662821486
- DGT user manual: base-time steps, start controls and count-up after zero
- DGT: DGT1002 Bonus timing methods, finish and dimensions
- DGT Shop: Bonus Timer SKU 23016 and EAN 8717662821509
- DGT user manual, English portion: bonus setup, first move and base-time steps
- DGT clock guide: available periods, delay methods and move counters by model
- Amazon: black DGT1001 single clock, GTIN ending in 821486 Paid link
- Amazon: DGT1002 with Bonus Time, single clock, GTIN ending in 821509 Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.