Sewing & Craft Comparisons · Reviewed November 1, 2026
Fiskars 18 x 24 vs 24 x 36: Which Quilting Mat Fits?
For trimming blocks beside a sewing machine, start with the 18 x 24. For cutting several strips from yardage, choose the 24 x 36 if you have a table that supports it. Each mat has a 24-inch side. The difference is whether using that side for the cut leaves 18 inches for the rest of your fabric or a full 36.
Best for
Quilters deciding how much cutting space to keep next to a machine or how much tabletop to dedicate to cutting yardage.
Probably not for
Someone who needs an ironing surface, a base that spins a block into position, or a mat that folds into a project bag.
Specifications at a glance
| At the cutting table | Fiskars 18 x 24 | Fiskars 24 x 36 |
|---|---|---|
| US listing model | 12-83717097J, gray, one mat | 12-83727097J, gray, one mat |
| Nominal grid size | 18 by 24 in | 24 by 36 in |
| Grid area, calculated | 432 square inches | 864 square inches |
| Cutting surface | Self-healing, gridded on both sides | Self-healing, gridded on both sides |
| Angle guides | 30, 45 and 60 degrees | 30, 45 and 60 degrees |
| With 24 in running front to back | 18 in of grid from left to right | 36 in of grid from left to right |
As an Amazon Associate I earn from qualifying purchases.
Fiskars 18 x 24 Self-Healing Cutting Mat, gray, 12-83717097J
A 12.5-inch unfinished block fits comfortably inside the smaller grid. With the block square to the grid, there are still 5.5 inches of unused depth on the 18-inch axis. That leaves room to slide a ruler into position without having to clear a three-foot length of table every time a block comes off the machine.
Pros
- The 24-inch axis accommodates a 22-inch folded fabric width
- Takes half the gridded area of the larger mat for trimming individual blocks
Cons
- Only 18 inches of grid beside a cut laid out on the long axis
- A 20-inch square cannot lie square to the grid without extending past the short side
Who it’s for: Pick this size for a machine-side trimming spot or for cutting from a basket of scraps. It can also handle a strip-cutting session if you can orient the mat with the long side in the direction of the cut and support the remaining yardage on the table beside it.
Check Fiskars 18 x 24 Self-Healing Cutting Mat, gray, 12-83717097J on Amazon Paid linkFiskars 24 x 36 Self-Healing Cutting Mat, gray, 12-83727097J
On a table with the 36-inch side facing you, this mat gives you 24 inches from front to back for the cut. You can set a folded fabric width in that direction and use the longer axis to spread the next part of the yardage. Both faces have grids; you do not have to choose the large mat to get the angle guides.
Pros
- A 20-inch square fits within the grid with room on each axis
- Leaves 36 inches across the table when a 22-inch cut runs front to back
Cons
- Needs a correspondingly large flat storage place between sessions
- A longer cutting surface does not extend a short quilting ruler
Who it’s for: Pick this size for a cutting station where the mat can stay put while you feed yardage across it. The extra area is useful even if your longest regular cut is only 22 inches: the ruler and the part of the fabric waiting for its turn can share one plane.
Check Fiskars 24 x 36 Self-Healing Cutting Mat, gray, 12-83727097J on Amazon Paid linkWhere does the fold go on a 44-inch width?
Suppose your fabric measures 44 inches from selvage to selvage. Bringing the two selvages together gives you 22 inches from fold to selvages. That is the distance your cutter must travel to take a strip across the folded width, whether the pattern calls for a narrow binding strip or a wider border. Measure your actual cloth: removing a selvage or buying fabric of a different width changes the number. The two mat sizes do not require different folding instructions.
Lay the 22-inch run along a 24-inch grid axis. That leaves two inches of grid in total, not two at each end. On the smaller mat this means turning its long side front to back if you normally cut away from yourself at the near edge of the table. On the large mat the short side already does the job in that orientation. Now look left and right. If the uncut fabric can lie on a clear table beside the smaller mat, it need not all be on the grid. If it hangs over the table and tugs at the fold, find more support before cutting.
The first strip and the squares cut from it are different jobs
Picture a pattern asking for a 2.5-inch strip and then several 2.5-inch squares. The first cut crosses the whole folded width. The later cuts each cross only 2.5 inches. A three-foot grid is useful in the first setup if you are taking strip after strip. For the second, you can turn a section of strip along the long side of the smaller mat, square the end, and subcut a few pieces at a time. Clear the finished squares into a tray so they do not get caught under the ruler.
Keep the ruler length separate from the mat size on your shopping list. A 12-inch ruler still ends halfway along a 24-inch line, even when there is a yard of mat beneath it. For a single guided cut, check that your straightedge covers the intended path. If your decision is actually about how the blade is covered between subcuts, the related OLFA rotary cutter comparison explains the difference between a sliding guard and a squeeze handle. Neither handle changes how much fabric the ruler supports.
Can you turn the block, or only set it down?
A square takes up more room partway through a turn than it does when its sides are parallel to the grid. Try a paper square cut to the largest unfinished block size in your pattern. A 16.5-inch block fits squarely inside the smaller mat. Turn it 45 degrees in place and its opposite corners are now about 23.3 inches apart. That span exceeds the 18-inch side. This is not a reason to buy another mat if you are happy to lift the block, turn it, and set it squarely back down.
On the larger grid that same paper square can make the turn without a corner crossing the boundary, provided it is centered and there is nothing else in its way. Try it beside the pieces of a second, unsewn block. A star with four corner squares and four sets of points is worth keeping in order, especially if the print has a top and a bottom. Can you turn the sewn block without nudging a point from the next one? If yes, the larger surface can serve as both a cutting area and a place to keep the next block laid out. If the second block stays on a tray until needed, there is little reward for an empty stretch of grid.
Allow for the seam allowance before you choose a size
A pattern picture may call a block 12 inches because that is what shows in the quilt. With a quarter-inch seam allowance on each side, the piece you need to trim could be 12.5 inches. Use the unfinished measurement in your pattern, not the finished number from the illustration. The difference gets important near an edge: an 18.5-inch unfinished square will not fit squarely inside an 18-inch grid, although the finished block may be labeled 18 inches.
Try the same check for a panel with a picture you want to center. Mark the intended corners on a paper template before placing it on the grid. If the panel needs a 20-inch square cut, the larger mat lets you inspect all four proposed edges at once. If you are cutting an 8-inch motif from the middle of that panel, only the area around the motif and its cut path need to be on the mat; the rest can lie flat on the surrounding table. The size of the panel alone is a poor guide to the size of mat to buy.
Give both the mat and the iron a place to go
Measure the flat part of the table, not the width across a pair of rounded corners. Mark out the nominal grid with removable paper strips, set the sewing machine where you normally use it, and lay down a quilting ruler. Leave an allowance beyond your paper marks for the unprinted margin of a real mat. The advertised grid is not a promise that a shelf or drawer with exactly those inside dimensions will hold the entire mat. For a close fit, get an edge-to-edge measurement before ordering.
Give the mat its own flat storage spot, separate from the iron. A place under the pressing station may seem convenient until you need both tools at once. Plan the route of a sewn block: off the machine, over to a separate board for pressing, then onto the mat for trimming. The related Honey-Can-Do tabletop ironing board guide compares two ways to store that pressing surface. If a flat mat can stay beside the machine through all three steps, choose the size that fits there. If the table is reserved for cutting and the large mat can stay flat after you finish, the extra 18 inches alongside a folded cut are much easier to use.
Official sources and further reading
Sources reviewed on November 1, 2026. Prices, availability and terms can change; recheck before buying.
- Fiskars 2026 Creating Catalogue, printed page 62: nominal mat sizes, reversible grids and angle guides
- Fiskars: rotary cutters, self-healing mats and rulers in the sewing and quilting range
- OLFA quilting technique: turning a strip and subcutting squares and rectangles
- Amazon US: one gray Fiskars 18 x 24 mat, model 12-83717097J Paid link
- Amazon US: one gray Fiskars 24 x 36 mat, model 12-83727097J Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.