Music & Hobby Comparisons · Reviewed November 5, 2026
Kun Original vs Collapsible: 4/4 Violin Shoulder Rests
Take your violin case to the shop. If a Kun Original fits you and has a secure place in the case with its feet still attached, there is little reason to change models. If the feet are what keep the rest out of the accessory compartment, try the Kun Collapsible. Its ends fold down after you take it off the violin. That changes how you pack it, not the size of violin it serves.
Best for
A full-size violin player deciding whether a nonfolding rest can travel in the case or whether folding ends would solve a specific packing problem.
Probably not for
A viola or fractional-violin owner, or someone looking for a chinrest. These are two shoulder rests selected specifically for 4/4 violin.
Specifications at a glance
| Decision point | Kun Original | Kun Collapsible |
|---|---|---|
| Instrument in this comparison | 4/4 violin | 4/4 violin |
| US listing product code | 830300 | 830350 |
| After playing | Ends remain upright | Ends fold toward the base |
| Height setting | Turn the threaded feet | Turn the threaded feet |
| Width setting | Reposition the end brackets on the base | Reposition the end brackets on the base |
| Before first use | Install the supplied feet | Supplied assembled |
| Parts compatibility | Do not fit Collapsible end brackets | Do not fit Original end brackets |
As an Amazon Associate I earn from qualifying purchases.
Kun Original shoulder rest for 4/4 violin, 830300
The Original is a good match for a player who takes the rest off, puts it in its own roomy compartment and takes it out ready for the next rehearsal. Nonfolding does not mean nonadjustable: the brackets move along the base, and the two feet have individual height settings.
Pros
- Goes from storage to the violin without unfolding the ends
- Allows different height settings at the two ends
Cons
- Needs room for the attached feet at their playing height
- Cannot be converted to the folding model by changing the end brackets
Who it’s for: Choose it for a known playing fit and adequate carrying space. Pass if it only fits your case with a foot pulled out.
Check Kun Original shoulder rest for 4/4 violin, 830300 on Amazon Paid linkKun Collapsible shoulder rest for 4/4 violin, 830350
The Collapsible addresses one awkward dimension of a packed rest: the ends that project from the base. Folding them down can make a shallow compartment useful. The curved base itself does not fold in half, so limited length or a narrow opening can still rule out a case.
Pros
- Packs lower without routinely removing either foot
- Folding for storage is separate from adjusting the bracket positions for width
Cons
- Still needs room for the length of the base
- Requires unfolding the ends before attaching the rest if stored folded
Who it’s for: Choose it when the folded sample fits a compartment the Original cannot use. Skip the switch if you need a different playing shape rather than a smaller packed shape.
Check Kun Collapsible shoulder rest for 4/4 violin, 830350 on Amazon Paid linkRead the case from the inside out
Start with the compartment you will actually use. A shaped violin case can have a generous-looking space on the outside and a small opening under the interior flap. Check three things separately: can the base pass through the opening, can the ends sit below the rim, and can you retrieve the rest without scraping past the instrument? A rest that passes the first check may still fail the second. Only the second problem is likely to be solved by folding the ends.
If possible, try the fit with the violin safely out of the case first. Put the rest in its intended spot at the height and width you use to play. Look across the top of the compartment before closing its cover. Do not latch a lid against resistance to discover where it presses. If the case has no secure compartment for either model, separate accessory storage is a better answer than putting a loose rest beside the violin.
For a school orchestra trip, lay out the kit that goes through the door together. If you already carry a separate bag for your folder and folding stand, there may be a protected spot there for the Original. If the goal is one self-contained violin case, try the folded rest in that case instead. A guide to wire and solid sheet-music stands can help with the other packing decision: whether the stand travels at all or stays in the practice room.
Know which setting you are changing
Look at one end of either rest. The fork is the T-shaped piece that meets the violin; its threaded stem changes the height on that side. Below it, a bracket attaches to the base. Moving that bracket changes the span between the two feet. On both models Kun describes repositioning the bracket and fastening its nut again. Folding the Collapsible is a separate motion. There is no need to undo that nut just to get ready to go home.
The first setup of a new Original deserves a minute before the lesson. Kun assigns the shorter screw to the wide end and the longer screw to the narrow end. Lay the pieces out that way before inserting the feet. The fact that packed feet come separately is not an invitation to return the rest to its factory arrangement every evening. Kun warns that repeatedly pulling the foot and pivot out of the bracket for storage can weaken the bracket.
Keep a picture of a working setup, particularly if someone else helps pack the instrument. A side view records which end is higher; a second view shows where the brackets sit on the base. That is more useful than noting that the rest is “on medium.” Check clearance under the back of the violin after an adjustment: Kun specifically cautions against letting the width-adjustment hardware sit too close to the instrument.
Compare the rests on the same violin
Full-size describes the instrument, not the person. If you can borrow both versions, take your own violin with its usual chinrest and have a teacher or shop fitter help set each one up. Kun calls for sliding the rest carefully onto the lower bout, the broad part of the body near the tailpiece. If it will not go into position without force, stop and revisit the width setting. Do not turn a fit question into a contest of grip strength.
Read a familiar line of music with each rest, using the same stand position and the same passage. Start slowly enough to notice whether you keep repositioning the instrument before a string crossing or shift. If you normally practice to a click, use the same click source both times; the Korg and Seiko metronome comparison covers that separate practice choice. The question here is whether you can leave the setup alone while you play the line, not whether the second attempt sounds better because you have just rehearsed it.
Then take the rest off and put it on again. Can the person who owns the violin repeat the setup without help? That matters especially when a parent packs the instrument at home but the student unpacks it at rehearsal. For a gift, confirming which rest worked at the lesson is more informative than guessing from the player’s age. Also confirm the instrument size on the rental agreement: both names appear on other sizes, including rests for viola.
If you already own an Original
A different case does not automatically call for a new rest. Identify what changed. If the compartment is shallower but long enough for your base, the Collapsible is the model to try. If the compartment is too short, take the case along and investigate a different storage location first. If the old rest fits the case but no longer feels right on the violin, take the instrument and rest to a fitting before replacing either.
Do not plan a halfway conversion with spare end brackets. Kun says the two models use different bracket dimensions; parts that look alike are not necessarily a secure match. For a repair, identify the exact rest and size before ordering the part. For a packing change, compare the complete rests. A good final choice passes two separate checks: the player can set it up for a lesson, and the player can put it away afterward without undoing that setup.
Official sources and further reading
Sources reviewed on November 5, 2026. Prices, availability and terms can change; recheck before buying.
- Kun Original: sizes, nonfolding ends and warning about removing the feet for storage
- Kun Collapsible: folding design, instrument sizes and end-bracket compatibility
- Kun assembly: supplied configuration and foot orientation
- Kun adjustment: height, width and clearance
- Kun installation: positioning the rest on the lower bout
- Amazon US: Kun Original 4/4 violin shoulder rest, model 830300 Paid link
- Amazon US: Kun Collapsible 4/4 violin shoulder rest, product code 830350 Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.