Kitchen Tool Comparisons · Reviewed November 4, 2026
Lodge LGP3 vs L6BP: Round or Rectangular Grill Press?
If breakfast means a row of strips on a flat top, the narrow rectangular Lodge LGP3 lets you line the weight up with the food. If it means one burger at a time in a small round skillet, look at the round L6BP first. Their big difference is not how much iron you get. It is where that iron lands: a press that rests on the skillet wall instead of the patty cannot do the job you bought it for.
Best for
Someone choosing a hand-held, seasoned iron press to use over food on an existing cooking surface, particularly where space beside the food is limited.
Probably not for
Someone who needs a mold to portion raw patties, an electric contact grill with its own upper heating element, or a tool that sets a precise finished food thickness.
Specifications at a glance
| What Lodge specifies | LGP3 rectangular grill press | L6BP round burger press |
|---|---|---|
| Base footprint | 6.75 × 4.5 in., rounded corners | Sold as 6.25 in.; dimensions table rounds length and width to 6.3 in. |
| Overall height | 3.5 in. | 2 in. |
| Listed weight | 2.64 lb. | 1.72 lb. |
| How to identify the tool | Raised coil handle; hammered base | Round base; short centered handle |
| Material and care | Seasoned cast iron; hand wash, dry and oil | Seasoned cast iron; hand wash, dry and oil |
| Selected US package | One LGP3 press | One L6BP press |
As an Amazon Associate I earn from qualifying purchases.
Lodge LGP3 rectangular cast iron grill press
The long direction runs 6.75 inches; the short direction is only 4.5 inches across the base. That gives the LGP3 a useful orientation on a crowded griddle. Lay the long edge parallel to bacon or a narrow sandwich without setting the same width of iron over the space beside it. Check the handle as well as the base if your pan has high sides: Lodge’s drawing puts the coil assembly at five inches across.
Pros
- Long, narrow footprint leaves working space beside a strip or oblong sandwich
- More weight than the round model when you want the tool to rest on the food
Cons
- Corners need clearance in a round skillet
- The 3.5-inch height can rule out an otherwise roomy drawer
Who it’s for: Choose the LGP3 for a rectangular cooking zone where a second item or a spatula needs room alongside. Skip it if the only flat area available is a small circle inside sloping walls.
Check Lodge LGP3 rectangular cast iron grill press on Amazon Paid linkLodge L6BP round seasoned cast iron burger press
The L6BP places a circular face over a single patty without four corners projecting past it. You do not have to turn the tool to line up a long axis before each press. It is also the lighter tool here. A center grip and a lower overall height suit a simple press-and-lift motion, but the diameter still has to fit the cooking surface; the size printed on the box is not a promise about the patty you will make.
Pros
- Round outline makes it straightforward to check clearance in a round pan
- Lower and 0.92 lb. lighter than the LGP3 by Lodge’s figures
Cons
- A circular face does not cover the corners of a square sandwich of the same width
- Occupies more space across a narrow row of food than the 4.5-inch-wide rectangular base
Who it’s for: Pick the L6BP for individual round patties on the griddle or in a skillet that clears its diameter. It is a less natural fit for a long strip you want to hold down end to end.
Check Lodge L6BP round seasoned cast iron burger press on Amazon Paid linkPut a cutout inside the cold pan
Before shopping by the number stamped under your skillet, put it on the counter, cold and empty. Cut a paper circle about 6.3 inches across and a rectangle 6.75 by 4.5 inches. Test each at the position you normally cook, not only in the middle. A skillet sold by its rim diameter can have a substantially smaller flat floor. If a corner of the rectangle rides up the side, part of the pressure would go into the pan wall. The paper has square corners and the LGP3’s are rounded, so treat a marginal fit as a reason to measure more carefully, not as proof it will fit.
Then put your usual slice of bread, or a paper outline of the patty you want to make, underneath. Will the face land on the food, or bridge over it onto something taller next door? Can you still slide your turner in when you lift the weight? On an open rectangular griddle you can rotate the LGP3 to leave a lane for the turner. You do not need that trick to orient the L6BP, but you still need a free approach. The electric griddle comparison is worth a look if it is the cooking area itself that is too small. A new press cannot add a second cooking zone.
Paper tells you only about the footprint. The handle and the hand holding it occupy space higher up. Think about lifting the press with heat protection on, particularly under an overhanging shelf or beside the handle of another pan. Remove every paper template before heating the cookware.
A row of bacon is a different shape from a burger
Picture a short row of strips with eggs planned for the space immediately to the right. The rectangle can sit with its long direction following the strips. Against a round piece of iron, a strip near the edge lies under a shorter section of the circle than one passing through its center. That is why matching just the longest published measurement can be misleading. Neither face will cover the full length of a strip longer than the tool. If your usual batch extends well beyond the footprint, decide whether covering part of it is useful before buying either press.
Now picture a single portion on a griddle, with the intent to flatten it there. The round L6BP can be centered over it without checking whether the patty will stick out along the short sides of a rectangle. There is no enclosing ring, though: the size and shape of the finished patty depend on the portion and how you press. If what you actually want is a stack of evenly sized raw patties ready to take outside, the Weber vs Weston burger mold guide addresses that job. Shaping before the pan and pushing down during cooking are different purchases.
Will it cover your sandwich, or squeeze out the filling?
Take a five-inch square slice as an example. The LGP3 is long enough in one direction, but its 4.5-inch base leaves half an inch of the bread width outside the footprint, even when aligned neatly. The L6BP is wider than the slice, but a five-inch square measures just over seven inches from corner to opposite corner. A circle about 6.3 inches across cannot reach all four corners at once. Neither observation makes the tool unusable. It tells you whether buying a press will solve the particular edge-coverage problem that bothers you.
Match the filling as well as the bread. A thin cheese sandwich and a thick roll piled with sliced tomatoes behave differently under the same weight. If you would not want a tall filling compressed, the lighter L6BP is not automatically the solution; the sandwich may be better cooked without a weight. For a slim oblong roll that does need pressing, the LGP3’s length is useful. For a little round bun on its own, much of the rectangle reaches past the meal. Choose by what you actually serve, not a picture of a panini made in a larger professional press.
These are weights, not powered sandwich grills. Neither supplies a hinged upper cooking surface, a timer or temperature control. Do not count on a dark mark or a thinner sandwich to tell you when food is cooked through. Follow your recipe and use your normal doneness checks.
Count the lifts and find a place for the hot press
The LGP3 is heavier by just under a pound. For strips that sit under the press for part of the cook, you may welcome that extra resting weight. For a row of separate patties, you have to pick it up and reposition it for every one. Weight printed on a specification sheet tells you what you will lift; it cannot predict how hard you will press or how a particular food will brown. If reaching across a loaded griddle is already awkward, change the arrangement rather than assuming heavier means better.
Set aside a stable, heatproof landing spot large enough for the entire base, away from clean serving dishes. Treat both the handle and the base as hot during use. Lodge calls for hand washing, drying and oiling both models. Include that extra item in the washing-up calculation, especially if you only make one sandwich at a time. Finally, check the height of your storage opening. The round model stands two inches tall; the rectangular model stands three and a half. A narrow shelf can favor the taller rectangle laid out lengthwise, while a shallow drawer may accept only the lower round press. Decide on the pan fit first, then confirm you have somewhere for the tool before and after the meal.
Official sources and further reading
Sources reviewed on November 4, 2026. Prices, availability and terms can change; recheck before buying.
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.