Sewing & Craft Comparisons · Reviewed November 10, 2026
Pattern Fitting Books: Nancy Zieman vs Sarah Veblen
If your last three skirts needed the same extra room at the hip, Nancy Zieman can help you put that change on paper before you cut another one. If a blouse pulls when you reach forward and you cannot tell why, Sarah Veblen gives you a way to read and alter a sewn sample. The choice is about what you already know when you sit down with the pattern.
Best for
Home garment makers who can follow a sewing pattern and want to adjust it for a particular wearer, either at the tracing table or during a fitting.
Probably not for
Someone looking for a first sewing-machine lesson, a wardrobe of ready-to-cut patterns, or instructions for letting out a finished, lined garment with no pattern pieces.
Specifications at a glance
| At the sewing table | Nancy Zieman | Sarah Veblen |
|---|---|---|
| Book | Pattern Fitting With Confidence | The Complete Photo Guide to Perfect Fitting |
| Starting point | Measurements and a paper pattern | A test garment fitted on the wearer |
| What you change first | The traced outline, by pivoting or sliding the pattern | The fit of the fabric sample; transfer the change to paper |
| Reference features | Fitting charts and technical index | Photographed fittings and pattern alterations |
| Paperback compared | 2008, 128 pages; ISBN 9780896895744 | 2012, 224 pages; ISBN 9781589236080 |
As an Amazon Associate I earn from qualifying purchases.
Nancy Zieman, Pattern Fitting With Confidence (paperback)
A chart-based guide to tracing an adjusted outline by moving a pattern piece. The original shape remains available for comparison because you do not cut it apart to make the alteration.
Pros
- Lets you plan a familiar width or length change before sewing a sample
- Charts and an index suit a return visit when you need to repeat an alteration
Cons
- A number alone will not tell you where a fold in a finished blouse came from
- Requires enough flat space to move a pattern piece over a second sheet without shifting the tracing
Who it’s for: Choose Zieman for an adjustment you can describe and measure. If most of your fitting notes say only that a sleeve feels wrong, start with the other book.
Check Nancy Zieman, Pattern Fitting With Confidence (paperback) on Amazon Paid linkSarah Veblen, The Complete Photo Guide to Perfect Fitting (paperback)
A photo-led guide to working on a mock-up, observing what changes on the wearer, then putting the new seam or shaping back onto the pattern.
Pros
- Shows how folds and balance lines can guide a fitting when the needed change is not obvious
- Addresses how to take a successful fabric adjustment back to a usable paper piece
Cons
- Calls for sample fabric and sewing time before the fitting can answer a question
- Seeing and changing the back of your own mock-up can be awkward without help
Who it’s for: Choose Veblen for a garment that hangs differently on the wearer than you expected. It is more work than a known paper adjustment if all you need is a familiar change in length.
Check Sarah Veblen, The Complete Photo Guide to Perfect Fitting (paperback) on Amazon Paid linkStart with the note you made on your last garment
“The hips need another inch” and “the skirt rides up when I walk” are different notes. The first might lead straight to Zieman: you have a location, an amount and perhaps a previous skirt to measure. The second describes an event, not an alteration. Adding an inch at every side seam might change the skirt without stopping it from riding up. Veblen is the more useful guide when you want to watch what the cloth does and decide where to intervene.
Check what that first inch refers to. Try on the earlier skirt with the top you normally tuck into it. Stand and sit. Measure the skirt itself at the height where it feels tight, not at the widest point on the paper just because that is easy to find. Write down whether the inch is a change to the whole circumference, to one side of the garment, or to the distance between two marked points. A flat pattern piece may be cut twice; an ambiguity that looks small on paper can double in the cloth.
With no previous version, compare the intended silhouette to a garment you like. A loose smock and a fitted shirt can both be the right size while having quite different finished measurements. Decide what you want to keep before correcting what you dislike. The gathers that give a smock its shape are not the same problem as fabric straining across a shirt button.
What a pivot buys you at the tracing table
Picture a sleeveless top whose neckline and shoulder fit well but whose lower edge needs room. Going up a whole size can alter the neckline you wanted to keep. In a pivot, a point on the pattern stays in place while the piece turns toward a mark on the sheet beneath. You trace the relevant part of its edge in the new position. A slide moves the piece without turning it. Zieman teaches where and how to make those moves; it matters that the anchor belongs to the particular alteration, not simply to a convenient corner of the paper.
Use two pencil colors for a first attempt. Give the original outline one color, the working marks another. Include the stitching lines you need to locate a pivot: on a pattern with seam allowances, the corner where two cut edges meet is not where those two seams cross. Label the original grainline, which shows how the piece lies along the fabric, and keep it identifiable. If you lose track of which curve is the new armhole, you can stop and compare the two outlines without sacrificing your only copy.
A good exercise before committing yardage is to use a small paper copy and make just one change. Can you point to the part that stayed the same? Can you name the adjoining piece that might now need attention? If that process feels natural, the 128-page book gives you a repeatable way to work. If you are still guessing whether width was the problem at all, a more neatly traced line will not settle the question.
Let a test blouse answer one question at a time
Veblen’s starting point makes sense for a button-front blouse that hangs level on the hanger but dips to one side when worn. Make the sample from cloth with behavior reasonably close to the planned blouse. A stiff leftover curtain lining can show where a seam lands, but it will tell you little about the soft folds of a rayon blouse. Draw a center front and a horizontal reference line on the sample before sewing. Those lines let you see the direction the fabric has moved, even when the amount of extra cloth is hard to judge.
Close the sample at its intended center front, not wherever the two raw edges happen to meet. Stand normally, arms relaxed, and look at the lines in a mirror or a straight-on photograph. Note one thing you see before changing anything: perhaps the horizontal line climbs toward one side. Trying a small adjustment in the sample lets you see whether that slope changes. If not, release the adjustment. Do not make a matching alteration on the other side just for symmetry when the original behavior was different there.
After settling the sample in a neutral stance, check the job of the blouse. Could you button the cuff, type or reach for a shelf? Some folds appear only because your arm is moving. Pinning out every fold visible with an arm raised can take away the room you need when it comes down. This is where the extra time spent on a mock-up pays for itself in information: you can distinguish a poor resting fit from the fabric needed for an ordinary movement.
Make a record you can cut from next time
A pinned sample alone is a poor record. Before pulling it apart, mark both sides of a changed seam at a few matching points so that you can pair them again. Give left and right their names from the wearer’s perspective. For dark sample cloth, the guide to Clover’s chalk liner and triangle chalk compares a narrow mark with one you can sweep across a larger area. Try the mark on a scrap and photograph it before it has a chance to rub away. Thread marks are another option if chalk won’t hold long enough.
When a side seam has to come apart, mark the old stitching line as well as the proposed one. Unpick just the section you need on the sample, off the body. If you repeatedly open seams to compare two possible lines, the Clover 463 and Grip Fit seam ripper comparison explains the handle and thread-cleanup differences. Remove loose thread ends before trying the garment again: a strand catching across an opening can make a released seam look as though it is still pulling.
Put the change onto a dated pattern copy and check the adjoining pieces at their stitching lines. If you widened a skirt at its waist, does the waistband still meet the skirt after its darts are closed? If you reshaped a neckline, does the facing that finishes it match? Preserve any ease the design calls for; not every pair of joining lines is meant to measure exactly alike. A note about why you altered the piece is more useful six months later than an outline labeled only “new.”
Pick for the project waiting beside the machine
For a second skirt from the same pattern, choose Zieman if the first one already showed how much room you want and where. Keep the original tracing alongside the corrected version. For a first attempt at a shaped jacket front, choose Veblen if you cannot explain why a line from the armhole to the bust appears on one side. Plan time to make and mark the sample, and arrange a helper if the area you want to see is out of reach.
You need not buy both to combine the ideas. A paper change can be checked in scrap fabric; a successful pinned change should still become a clear paper pattern. Pick the book that covers the step you cannot yet do. If all you need is to shorten an already finished skirt, start with the hem construction and the hem allowance you actually have. Neither a fitting chart nor a full mock-up is necessary to answer that smaller question.
Official sources and further reading
Sources reviewed on November 10, 2026. Prices, availability and terms can change; recheck before buying.
- Penguin Random House: Nancy Zieman paperback, method, length and ISBN
- Nancy Zieman Productions: illustrated pivot-and-slide example on a tunic pattern
- Quarto: Sarah Veblen paperback, photographed fittings, length and ISBN
- Sarah Veblen: how the book uses a test garment and transfers changes to the pattern
- Amazon US: Pattern Fitting With Confidence, Nancy Zieman paperback Paid link
- Amazon US: The Complete Photo Guide to Perfect Fitting, Sarah Veblen paperback Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.