Laynie Hasan.

← All offer guides

Lawn & Garden Comparisons · Reviewed November 7, 2026

Orbit 62056 vs 58910: One Hose Timer Outlet or Two?

Count the hoses that need different start times, not the plants in the yard. The Orbit 62056 opens one outlet on a repeating schedule. The 58910 gives you two timed outlets on one faucet, with a start time for each. Choose the 62056 for one circuit that can run together. Choose the 58910 when the second hose needs to stay connected and run separately from the first.

Best for

A gardener with an outdoor cold-water faucet and one or two hose-fed runs who wants to program the valves at the tap.

Probably not for

A gravity-fed setup below the required pressure, a buried multi-zone controller replacement, or a schedule that needs several unrelated start times on one line.

Specifications at a glance

Manufacturer specifications for the exact versions compared
Feature6205658910
Maker model or listing ID6205658910; Orbit store SKU 58910Z
Automatically timed outletsOneTwo
Run duration1 to 240 minutes1 to 240 minutes per outlet
Repeat optionsEvery 6 or 12 hours, or every 1 to 7 daysEvery 6 or 12 hours, or every 1 to 7 days
Rain delay24, 48 or 72 hours24, 48 or 72 hours
PowerTwo AA alkaline batteries, purchased separatelyTwo AA alkaline batteries, purchased separately
Working pressure specified by Orbit25 to 100 psi25 to 100 psi

As an Amazon Associate I earn from qualifying purchases.

Orbit 62056 One Outlet Single-Dial Hose Faucet Timer

The 62056 is a one-valve timer with a brass swivel at the faucet. Think of everything downstream as one appointment: when the valve opens, water is available to that connected circuit. It makes sense for an established run that already distributes water where you want it.

Pros

  • One hose and one program to identify when checking the setup
  • Manual watering and rain delay cover occasional changes without requiring another outlet

Cons

  • A second bed cannot have its own automatic start through the same valve
  • Moving the hose between destinations still requires someone at home

Who it’s for: For one sprinkler or hose-fed system that stays in place. Pass if your routine already involves moving a hose from one destination to another every day.

Check Orbit 62056 One Outlet Single-Dial Hose Faucet Timer on Amazon

Orbit 58910 Digital 2 Outlet Hose Faucet Timer

The 58910 lets a pair of hoses remain attached to the same faucet while each outlet controls its own run. Its useful upgrade is the second controlled path. It does not give the faucet a larger supply, and connecting both hoses to the same destination will not create a useful second zone.

Pros

  • Keep two destinations connected without swapping hoses between runs
  • Set the start time and duration to match each outlet’s job

Cons

  • Two hose routes to label, inspect and keep clear at the tap
  • One start time per outlet is not a list of arbitrary appointments for either hose

Who it’s for: For a faucet serving two distinct schedules. Skip it if one timed hose already serves everything or if you actually need a more flexible calendar.

Check Orbit 58910 Digital 2 Outlet Hose Faucet Timer on Amazon

Sketch the plumbing as it will stay connected

Draw the faucet on the left of a piece of paper and the beds, pots or sprinklers on the right. Now draw only the connections that will still be in place when nobody is there. A long hose that reaches three beds is not three automatic zones if someone has to carry the sprinkler from bed to bed. Conversely, a single installed line can serve many pots. If all of its emitters should run on the same schedule and the line already works at this faucet, one timer outlet can be enough.

Consider a side yard with a soaker hose and a separate sprinkler on a lawn section. You want the hoses to remain where they are, but you do not want both destinations receiving water every time either one needs it. That is a reason to choose the 58910. Label the hoses at the timer while you can still see where each leads. “Left outlet” is easy to misremember when you bend down to look at the timer from another direction; “side bed” tells the next gardener which planting will receive the water.

A plain Y splitter installed after a one-outlet timer solves a different problem. It can send water down two open branches during the one valve event. It cannot tell that valve to open for the herbs in the morning and for the lawn later. A person could turn the splitter handles between visits, but that person would be doing part of the scheduling. Count that as manual work when comparing that arrangement with a second timed valve.

Write a schedule the dial can actually express

Separate the clock time, run length and repeat interval. For example, “start at seven, run for ten minutes, repeat every second day” describes three settings. The ten minutes are an illustration, not a watering recommendation. The appropriate duration depends on the equipment and site. If those are the only instructions for a single hose, the 62056 covers the pattern. With the 58910, think of a second row on that sheet for the other outlet rather than a second row for the first one.

Now try writing “Mondays and Fridays only.” The gap is four days from Monday to Friday and three days going back to Monday. A regular interval of every third or fourth day cannot keep reproducing that calendar. Likewise, a six-hour repeat is not a choice of any four convenient clock times. If a local rule, work roster or shared garden contract demands specific weekdays or uneven sessions on the same hose, check for a controller that expressly supports them. Adding another timed outlet does not add a weekday picker.

If you use a short repeat interval, check the manual before counting on a particular first run. Orbit explains that on programs repeating more often than once in 24 hours, the interval determines the first start rather than the entered start time. Set up the schedule while you can observe the first cycle. An understandable time on the clock display is not evidence that the next valve event will happen at the time you assumed.

Check the faucet, then check the far end of the hose

Both timers are for outdoor cold-water irrigation, with a specified working range of 25 to 100 psi. That minimum matters if the proposed source is a rain barrel. A hose that dribbles water by gravity is not proof that a timed valve is operating within specification. If you cannot establish that the source meets the requirement, do not buy either model for that setup on the strength of its outlet count. A timer controls when a supply opens; it does not provide a pump or regulate the downstream pressure.

Look beneath the faucet before ordering. Is there room to attach the timer without a hose bending sharply against a wall, pot or path? Can you read and turn the dial, remove the battery tray and check the hose connections after installation? For the two-outlet model, follow both hoses around corners. Two working valves are little use if the second hose has nowhere to go without being crushed by the gate. Orbit calls for hand tightening and keeping the filter washer in place; do not plan on forcing an awkward connection with a wrench.

Turn on a manual run while you can walk to the outlet’s destination. Watch which line actually opens, whether the far end delivers as intended and whether it shuts off afterward. This is a commissioning check for your own installation, not a performance comparison between timers. It also separates a scheduling mistake from a delivery problem. A closed handheld nozzle will not water the bed just because the timer opens. The Dramm vs Orbit hose nozzle comparison covers how to choose the hand-operated end of the hose, not a replacement for a timed valve.

Plan for interruptions before the first unattended run

A rain delay is a choice you make at the timer, not a measurement of your soil. These models offer pauses of one, two or three days. Use that option when you want to suspend the regular routine temporarily. Manual watering addresses the reverse situation: an extra run outside the normal pattern. Neither feature decides whether a sheltered planter missed the rain that soaked an exposed bed. Walk the route and look at the actual destinations before altering both schedules to solve a problem at just one.

Some jobs do not warrant another permanent hose. Perhaps the bed needs a repeating run, but you occasionally need to reach a few pots that move between the porch and the greenhouse. The Bloem and elho watering can guide covers a portable alternative for that second job. The useful comparison is not simply one outlet versus two; it is whether the extra job will benefit from being plumbed and scheduled at all.

Leave a note identifying the faucet, connected destinations and normal dial position for anyone looking after the garden. If somebody closes the faucet after washing a pot, a timer can keep displaying its schedule without water ever reaching the hose. Before freezing conditions, remove and store the timer according to its manual; the manufacturer warns against allowing it to freeze. Pick the 62056 for the single run you can leave alone, the 58910 for the two runs you need to control separately, and neither until the water supply and scheduling pattern both fit.

Official sources and further reading

Sources reviewed on November 7, 2026. Prices, availability and terms can change; recheck before buying.

Commission disclaimer

This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.