Laynie Hasan.

← All offer guides

Kitchen Tool Comparisons · Reviewed October 30, 2026

OXO vs BOSKA Copenhagen Cheese Plane: Grip or All-Steel Design?

Both are handheld blade-style cheese planes, not wire cutters. OXO provides a non-slip handle and non-stick head; BOSKA Copenhagen uses an all-stainless-steel design. Choose around the cheese you slice and the handle you prefer.

Best for

Households slicing suitable cheese blocks for sandwiches or serving boards and deciding between a non-slip handle and an all-steel tool.

Probably not for

Anyone needing calibrated slice thickness, a wire-cutting board, a grater, or a tool documented to handle every soft and crumbly cheese equally.

Specifications at a glance

Manufacturer specifications for the exact versions compared
Manufacturer-documented featureOXO 11237700BOSKA Copenhagen 357600
Tool typeHandheld blade-style cheese planeHandheld blade-style cheese slicer
Material descriptionStainless steel blade with non-stick headStainless steel
Handle distinctionNon-slip gripAll-stainless-steel Copenhagen construction
Cheese guidanceHard and semi-soft cheeses on current US pageSemi-hard and aged cheeses
Thickness approachAngle the plane for thinner or thicker slicesManufacturer manual describes pressure and angle control
Numbered thickness presetsNot specifiedNot specified
Dishwasher permissionYesYes

As an Amazon Associate I earn from qualifying purchases.

OXO Good Grips Non-Stick Cheese Plane 11237700

A blade-style plane with a stainless steel blade, non-stick head and non-slip handle. OXO describes changing the working angle to vary slice thickness rather than selecting a numbered setting.

Pros

  • Documented non-slip handle
  • Non-stick head is part of the stated design
  • Manufacturer permits dishwasher cleaning

Cons

  • No calibrated slice-thickness settings
  • Non-stick label does not specify coating chemistry
  • Current US manufacturer page does not provide overall dimensions

Who it’s for: Choose it if the non-slip handle is the feature you want for routine sandwich preparation. Skip it if your priority is an entirely stainless-steel utensil or precisely specified slice thickness.

Check OXO Good Grips Non-Stick Cheese Plane 11237700 on Amazon

BOSKA Cheese Slicer Copenhagen 357600

A stainless-steel cheese plane intended for semi-hard and aged cheeses. Copenhagen is the all-steel option here, with manufacturer-published overall dimensions and dishwasher permission.

Pros

  • Entirely stainless-steel Copenhagen construction
  • Manufacturer publishes overall size and weight
  • Explicitly intended for semi-hard and aged cheese

Cons

  • No separate non-slip handle material is documented
  • No calibrated slice-thickness settings
  • Not the dedicated soft-cheese slicer discussed in the manufacturer manual

Who it’s for: Choose it for suitable cheese blocks when you prefer an all-steel handle and head. Skip it when you specifically want a non-slip grip or primarily serve cheeses that need another cutting format.

Check BOSKA Cheese Slicer Copenhagen 357600 on Amazon

Start with the cheese and the shape of the serving

A cheese plane suits the person who wants slices from a block, not a pile of grated cheese or a row of cubes. Think about your usual sandwich or serving board before comparing brands. If the task is topping a casserole with shreds, a plane is the wrong format even if its stainless-steel appearance resembles another useful kitchen tool.

The makers describe overlapping but not identical cheese ranges. OXO’s current US page names hard and semi-soft cheeses; BOSKA positions Copenhagen for semi-hard and aged varieties. BOSKA’s manual warns that soft cheese can stick to a normal slicer and points to a separate soft-cheese design. Do not read a broad Amazon title as proof that every cheese works equally well.

The handle is the clearest everyday distinction

OXO expressly identifies a non-slip handle. That is a concrete design feature for someone who likes a grip material distinct from the blade. BOSKA’s Copenhagen collection is made entirely from stainless steel, giving you a different surface to hold. The choice is between documented constructions, not a claim that either one is universally easier to use.

Consider the utensils you already reach for. If you consistently prefer a separate grip, the OXO follows that preference. If you want an all-steel tool alongside other serving pieces, Copenhagen is the closer match. Neither specification establishes less hand fatigue or a measured reduction in required force. Those would require evidence beyond the product descriptions used for this comparison.

Thickness changes with technique, not a numbered dial

OXO tells users to change the plane angle for thinner or thicker slices. BOSKA’s linked manual describes using the blade at a slight angle and controlling pressure. Neither cited product page provides a set of numerical thickness positions. The useful distinction is that you are controlling a hand tool, not setting a machine to produce a specified millimeter thickness.

Start by deciding what the slice needs to do. A sandwich layer, a folded serving-board slice and a recipe measured by weight are different requirements. If the recipe specifies a mass, use a scale rather than counting nominally similar slices. Our OXO-versus-Escali kitchen-scale comparison addresses that separate measurement decision. Buying either plane does not make slice count a calibrated portion measure.

Give the blade a clear route across the block

Look at the block you normally buy and where you will hold it. A narrow wedge and a broad rectangular face offer different working areas. Keep the cheese supported, make room for the blade’s path and keep fingers out of that path. Follow the supplied instructions instead of forcing a difficult piece simply because its cheese name appears in a shopping description.

BOSKA’s manual recommends light pressure and cautions that pressing too hard can create thicker slices or cause snagging. Treat that as operating guidance, not proof of a measured advantage over OXO. If the remaining piece becomes awkward to hold, stop and choose a suitable cutting method. A cheese plane is not a reason to keep slicing a small remnant without secure support.

Check storage size without confusing packaging with the tool

BOSKA publishes Copenhagen’s product dimensions as 210 by 73 by 10.1 millimeters, while the packaged dimensions are 290 by 92 by 18 millimeters. Those are different measurements for different purposes. Use the product figure when checking a utensil tray, and do not mistake the package length for a blade length or a usable cutting width.

The current OXO US product page supplies the model and operating features but not overall dimensions. This guide therefore does not build a size ranking from unmatched retailer fields. If a particular drawer compartment determines your choice, confirm the exact OXO dimensions before ordering. For either tool, choose storage that keeps the cutting edge from being an unseen contact point when reaching for other utensils.

Both allow dishwasher cleaning, but that is not a durability test

Both primary product pages explicitly permit dishwasher cleaning. That makes dishwasher compatibility a shared feature, not a reason to name a winner. Follow the instructions provided with the exact tool and inspect the blade area after cleaning. A published care instruction does not establish how many cycles a utensil will withstand or whether one will retain its edge longer.

Do not infer an unspecified coating chemistry from the OXO name Non-Stick or transfer that name to the BOSKA. The useful supported facts are the OXO head description and the Copenhagen stainless-steel construction. If you actually need several grating textures, our OXO-versus-Cuisipro box-grater comparison is more relevant. That tool choice concerns the desired cut, not which one is easier to wash.

Check the exact model before making the final choice

Choose OXO 11237700 when its non-slip grip is the reason to change your current setup. Choose BOSKA 357600 when you want the all-steel Copenhagen design for semi-hard or aged cheese. Keep looking if calibrated thickness, a wire cutter or a dedicated soft-cheese format is essential. An existing plane that already suits your cheese and grip preference may need no replacement.

Manufacturer documentation and listing identities were checked on October 30, 2026. Amazon’s OXO listing shows manufacturer part number 11237700 and UPC 719812685335, although its separate model-number field says 3114300. The linked BOSKA is Copenhagen 357600, matched by manufacturer EAN 8713638034201. Confirm the selected product, not just the brand. This is a documentation-based comparison, not hands-on testing or a summary of customer reviews.

Official sources and further reading

Sources reviewed on October 30, 2026. Prices, availability and terms can change; recheck before buying.

Commission disclaimer

This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.