Kitchen Tool Comparisons · Reviewed October 29, 2026
OXO vs Rösle Nutcracker: Soft Grip or Stainless Steel?
OXO pairs a compact stainless-steel body with a soft grip; Rösle specifies 18/10 stainless steel in a longer tool. Both are hand-squeezed nutcrackers, but their handle surfaces and storage dimensions make different buying cases.
Best for
People who buy nuts in their shells and want a handheld cracker for a snack bowl or small ingredient-preparation session.
Probably not for
Buyers seeking an automatic sheller, a bench-mounted lever machine or a documented guarantee of whole kernels from every nut.
Specifications at a glance
| Manufacturer detail | OXO Good Grips Seafood & Nut Cracker | Rösle Stainless Steel Nut Cracker |
|---|---|---|
| Current manufacturer identifier | 11350300 | 120781; old product number 12781 |
| Operation | Handheld squeeze tool | Handheld squeeze tool |
| Published material | Stainless steel and silicone rubber | 18/10 stainless steel |
| Published overall dimensions | Approximately 13.7 × 8 × 1.3 cm | 19.5 × 10.5 × 1.7 cm |
| Jaw description | Ridged opening with a narrow center | Forward-facing angled teeth |
| Manufacturer dishwasher permission | Yes | Yes |
| Quantity compared | One cracker | One cracker |
As an Amazon Associate I earn from qualifying purchases.
OXO Good Grips Seafood & Nut Cracker 11350300
OXO uses stainless steel and silicone rubber, with a soft handle and a ridged opening. Its manufacturer also explicitly describes shellfish use, although the shared buying task here is cracking nuts.
Pros
- Soft grip for buyers who prefer a covered handle surface
- Shorter published overall length than the Rösle
- Manufacturer documents both nut and shellfish uses
Cons
- Mixed-material construction rather than an all-steel utensil
- Each nut still needs individual positioning and squeezing
- No published numerical nut-size range in the cited specifications
Who it’s for: Choose OXO for a soft-grip, compact hand tool. Skip it if your preference is specifically for an uncovered steel handle or a machine for sustained batch shelling.
Check OXO Good Grips Seafood & Nut Cracker 11350300 on Amazon Paid linkRösle Stainless Steel Nut Cracker 12781 / 120781
Rösle specifies 18/10 stainless steel and angled teeth in a longer handheld cracker. Its current product page explicitly connects article 120781 with old product number 12781, which is used by the linked Amazon listing.
Pros
- Specified 18/10 stainless-steel construction
- Manufacturer permits dishwasher cleaning
- Official old-to-new product-number mapping makes the listing traceable
Cons
- Larger published overall dimensions to accommodate in storage
- No soft handle covering like the OXO
- Retail listings may use the older 12781 identifier
Who it’s for: Choose Rösle if a steel handle is the surface you want and the larger tool fits your drawer. Skip it if a soft grip or the smaller storage footprint is your priority.
Check Rösle Stainless Steel Nut Cracker 12781 / 120781 on Amazon Paid linkStart with why you buy nuts in the shell
A nutcracker makes sense when opening the shells is part of the experience: a bowl on the table, a small snack or occasional recipe preparation. These two tools address that same handheld task. Neither should be chosen as though it were an automatic sheller or a countertop machine with a separate lever. If your routine is to empty a large bag into a baking recipe, first decide whether shelling each nut is a step you actually want.
OXO has a broader stated purpose because it also names crab legs and lobster claws. That may be useful if the same kitchen needs a shellfish cracker, but it does not establish a nut-cracking advantage. Rösle presents this model as a nutcracker. Compare them around nuts first, then count an additional documented use only if it is something you will genuinely do.
The handle surface is a clearer distinction than a power claim
OXO describes a soft, non-slip handle, and its Japanese specification lists silicone rubber alongside stainless steel for the same 11350300 SKU. Rösle lists 18/10 stainless steel. Someone who deliberately chooses covered grips on small kitchen tools has a concrete reason to shortlist OXO; someone who prefers steel handles has a concrete reason to consider Rösle. Neither preference needs to be presented as a universal improvement.
The longer Rösle is not automatically easier to squeeze, and a soft surface does not guarantee a comfortable fit for every hand. Overall dimensions cannot tell you the working distance between the handles around a particular nut. If you can examine a tool before buying, consider that opening and the contact area under your fingers, rather than treating handle length alone as a measure of required effort.
Jaw details do not establish a universal nut-size capacity
OXO describes a ridged opening and a narrower center, while Rösle describes teeth angled toward the front. Those are documented design differences, not comparative test results. They do not establish that one tool always retains a nut better, creates less shell debris or produces more intact kernels. The comparison therefore does not award a winner for cracking strength or kernel preservation.
Look at the nuts you normally buy before purchasing a cracker. A mixed bowl presents different shapes, and a product photograph containing one nut is not a numerical size specification. The cited sources do not provide a directly comparable supported nut-diameter range for both products. If compatibility with a particular unusually large or hard-shelled nut is essential, obtain model-specific guidance instead of assuming every handheld cracker has the same scope.
Measure the drawer, not an imagined operating envelope
OXO Japan gives approximate dimensions of 13.7 by 8 by 1.3 centimeters for SKU 11350300. Rösle gives 19.5 by 10.5 by 1.7 centimeters. These published overall measurements support a straightforward storage distinction: the OXO is shorter and narrower. Check the compartment where the tool will actually live, especially if it shares space with a peeler, scissors or measuring spoons.
Do not reinterpret those measurements as maximum jaw opening, maximum nut diameter or handle span during use. They are useful for planning where a tool belongs, but not for predicting cracking force. Nor does the larger body make Rösle a different class of machine. It remains the handheld option in this comparison, with the nut placed and handled individually.
Whole kernels and chopped ingredients create different priorities
For a presentation where whole kernels matter, allow for sorting rather than buying on an assumed promise that every shell will release perfectly. For chopped nuts in a loaf or cookie dough, a broken kernel may be entirely suitable once it has been separated from shell pieces. Decide which result the recipe needs before making intact appearance the main reason for choosing one jaw design.
If the recipe specifies a weight of shelled nuts, measure the usable kernels rather than the unopened nuts and shells together. Our OXO-versus-Escali kitchen-scale comparison addresses that separate measuring decision. A scale does not improve shelling, but it prevents the nutcracker choice from obscuring the actual ingredient quantity you need after preparation.
Separate collection and cleanup from the tool choice
Set out separate places for unopened nuts, shells and the kernels you have checked before moving them into the recipe. Our OXO-versus-Cuisinart mixing-bowl comparison covers bowl construction and storage if your preparation setup also needs containers. Ordinary bowls you already own are sufficient; neither cracker calls for a proprietary receiving bowl or a matching branded kitchen set.
Both manufacturers permit dishwasher cleaning, so dishwasher permission does not break this tie. OXO Japan also says not to use bleach on SKU 11350300. Follow the directions supplied with the actual product and check the jaw area after cleaning. Do not infer that stainless-steel construction removes the need for care, or that the presence of a soft grip automatically rules out the dishwasher.
Match the product numbers before choosing a handle
The linked OXO Amazon product identifies model 11350300 and ASIN B0BK2NXGPH. The Rösle listing identifies model 12781 and ASIN B000GZ9OOC. Rösle now calls the product 120781 and explicitly lists 12781 as its old number; its EAN 4004293127815 also matches the listing identifier. This is a documented model-number bridge, not an assumption that any similarly named Rösle tool is equivalent.
Choose OXO for the soft-grip surface and smaller published dimensions. Choose Rösle for the specified steel construction when the larger body suits your storage. Keep an existing nutcracker if it already fits the task. These recommendations interpret manufacturer specifications and verified product identities; they do not imply hands-on testing or use Amazon customer reviews as performance evidence.
Official sources and further reading
Sources reviewed on October 29, 2026. Prices, availability and terms can change; recheck before buying.
- OXO UK: SKU 11350300, jaw design, soft grip, nut and shellfish uses, dishwasher permission
- OXO Japan: matching SKU 11350300, approximate dimensions, stainless steel and silicone rubber, care instructions
- Rösle: current 120781 and old 12781 mapping, EAN, dimensions, 18/10 stainless steel, jaw design and dishwasher permission
- Amazon: OXO model 11350300, ASIN B0BK2NXGPH and one-cracker product identity Paid link
- Amazon: Rösle model 12781, matching EAN, ASIN B000GZ9OOC and one-cracker product identity Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.