Laynie Hasan.

← All offer guides

Kitchen Tool Comparisons · Reviewed November 3, 2026

OXO Steel Angled vs Double Jigger: Which Pour Fits?

Pull out the drink recipe you make most often. If it starts with 2 ounces, the OXO Steel Angled Jigger can take that whole pour on the counter. If it starts with 1.5 ounces and calls for a third of an ounce of something else, look at the Double Jigger: both amounts are on the same end. The choice is less about what a bartender is supposed to own than which numbers you want to hit without stopping to do arithmetic.

Best for

Home bartenders and hosts who portion juice, syrup, concentrate or spirits for one glass at a time and want a dedicated small liquid measure.

Probably not for

A large punch bowl measured by the pint, a formula written by weight, or a recipe that needs very small doses such as a drop or a dash.

Specifications at a glance

Manufacturer specifications for the exact versions compared
Detail that changes the pourSteel Angled JiggerSteel Double Jigger
OXO model and linked quantity1233080, one jigger3105000, one jigger
FormOne open vessel with an angled scaleTwo opposed cups with a grip around the middle
Largest single measure2 US fl oz1.5 US fl oz on the larger side
Reading the toolOunce and tablespoon markings read from aboveLarger side: 1/3, 3/4 and 1.5 oz; smaller side: 1/4, 1/2 and 1 oz
For a 2 US fl oz ingredientOne 2 oz fillTwo 1 oz fills without flipping
Body and careStainless steel; dishwasher safeStainless steel with a non-slip grip; dishwasher safe

As an Amazon Associate I earn from qualifying purchases.

OXO Steel Angled Jigger, 1233080

The scale faces you when the vessel is below you. Set it beside the mixing glass, look down at the liquid as it approaches the mark, then use the lip to transfer it. This is a good fit for someone who likes to leave the measure on a work surface while pouring from a heavy bottle. There is no second cup to turn over or keep track of.

Pros

  • Takes a two-ounce ingredient in one fill
  • Tablespoon labels are useful when moving between a drink card and a kitchen recipe

Cons

  • Needs a view into the opening to make use of the angled scale
  • Not a substitute for a pitcher when several two-ounce servings go into one batch

Who it’s for: Choose the Angled if your usual setup has a level counter below your sight line. If the measure normally sits on a tall shelf or behind a shaker tin, try that position with a small cup before buying it for the overhead view.

Check OXO Steel Angled Jigger, 1233080 on Amazon

OXO Steel Double Jigger, 3105000

The two ends give you a full 1-ounce and a full 1.5-ounce measure, plus the smaller quantities OXO lists for each. A third of an ounce is especially useful here: it is a specified measure, not a guess somewhere past the quarter. Hold the center band with the end you need facing up, empty it and choose the next end before you pick up the next bottle.

Pros

  • One-third and three-quarter ounce measures on the larger end
  • Two full-cup sizes for recipes built around 1 and 1.5 ounces

Cons

  • No two-ounce end
  • Switching from a three-quarter-ounce ingredient to a quarter-ounce one means turning the tool over

Who it’s for: Choose the Double for a recipe you repeat by its familiar end and fill line. Skip it if the attraction is a single two-ounce shot: adding its two end capacities together does not give you a usable two-ounce cup.

Check OXO Steel Double Jigger, 3105000 on Amazon

Count transfers for one glass, not marks on a box

Try this example for an iced tea spritz: 2 ounces of chilled strong tea, 3/4 ounce lemon juice and 1/4 ounce simple syrup, followed by sparkling water to taste. With the Angled, measure the tea once. With the Double, use the 1-ounce side twice. You could fill the larger end with 1.5 ounces and flip to the half-ounce mark for the remainder, but repeating one full measure avoids turning a wet tool over just to finish the first ingredient.

The Double then has a useful change of pace. Its larger cup has the stated 3/4-ounce measure for the lemon; its smaller cup has the quarter for the syrup. Set the mixing glass close enough that you can tip the jigger into it without carrying the filled cup across the counter. A handheld citrus squeezer helps with getting the juice out, but squeeze into a separate container first. If half a lemon gives more juice than you need, the extra stays there instead of throwing off the drink.

A third of an ounce is not a generous quarter

Imagine adjusting a single serving of cold brew with a flavored syrup. Yesterday you liked 1/3 ounce; today you can only find a quarter-ounce mark. The difference is a twelfth of an ounce. That sounds small until you look at the syrup portion itself: one third is a third more than one quarter. Rather than calling the difference a splash, use the third-ounce marking on the Double’s larger side. You can change the amount deliberately on the next glass and know what you changed.

There is also a reason not to buy a second jigger for this one number. In US liquid measures, 1 tablespoon is half a fluid ounce, and 3 teaspoons make a tablespoon. That makes 1/3 fluid ounce exactly 2 measuring teaspoons. If most of your drinks suit the Angled and only one recipe needs thirds, use a teaspoon twice for that ingredient. The stainless measuring spoon comparison is about the smaller tools; a teaspoon from the cutlery drawer is not a marked measure. These are volume conversions, not ounces of weight from a scale.

Try the overhead view where you actually mix

Clear the space normally occupied by a cutting board or ice bucket. Put an empty cup there and glance into it from where you usually stand or sit. Can you see its bottom without moving the cup? Would the bottle or your pouring hand block the far side? The Angled design solves the problem of looking through the side of a metal cup. It does not solve a blocked view from above. Turn the scale toward you, fill on a level surface and keep the other ingredients off that patch of counter.

For the Double, picture the other end of the motion. You have emptied the larger cup and now want to turn it upside down to use the quarter-ounce mark. A little lemon juice left inside can run toward your fingers or the counter. Let the cup drain over the receiving glass before you flip it; put the syrup last if it is the ingredient that clings to the steel. When mixing a second, different drink, rinse away the previous flavor rather than letting the order of the pours decide what goes into it.

When the guest count changes the answer

For four of the tea spritzes, the measured ingredients become 8 ounces tea, 3 ounces juice and 1 ounce syrup. There is no prize for making eight trips with the Double’s one-ounce side to get the tea into a pitcher. Use a larger liquid measure for that part. Then the Double can handle the full batch of juice in two 1.5-ounce fills and the syrup in one 1-ounce fill. The tool that needed an extra transfer for one guest now has just the right marks for two of the batched ingredients.

If guests want different amounts of sweetness, batch only the tea and lemon. Leave the syrup beside the jigger and measure it into each glass separately. For someone following recipes in tablespoons, the Angled means no translating spoonfuls into ounces while talking to guests. If everyone likes the same proportions and you routinely mix a whole pitcher, use the kitchen measures you have. Buy a jigger for the part of the job that stays small, not because a drink served over ice has to be made with bar tools.

Official sources and further reading

Sources reviewed on November 3, 2026. Prices, availability and terms can change; recheck before buying.

Commission disclaimer

This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.