Photography & Printer Comparisons · Reviewed November 5, 2026
Print File 35-6HB vs 35-7B: Which Fits Your Film Strips?
Open one lab envelope before you order sleeves. If you find six strips with six pictures apiece, the Print File 35-6HB takes that roll as it is. If you find seven strips of five, the 35-7B takes those instead. One page holds 36 frames and the other 35, but the difference is not really one picture. It is where the lab placed the cuts, how the rows fall on a contact print, and whether the filled page clears the edge of your binder.
Best for
Photographers or family archivists filing developed, unmounted, full-frame 35mm negatives in strips.
Probably not for
Mounted slides, prints, uncut rolls you intend to keep whole, or film holders for a scanner.
Specifications at a glance
| What to match | 35-6HB (25 pages) | 35-7B (25 pages) |
|---|---|---|
| Row layout | 6 rows × 6 frames | 7 rows × 5 frames |
| Maximum frames per page | 36 | 35 |
| Contact paper specified by Print File | 8½ × 11 inches | 8 × 10 inches |
| Page width × height | 10 × 9¾ inches | 8 9/16 × 11 3/16 inches |
| Examples from the maker’s fit list | OB-1, oversized binders, SLB-1 file hangers | ALB-SB, ARC-S, OB-1, Safe-T-Binders |
| Material | PVC-free polyethylene | PVC-free polyethylene |
| Manufacturer code for selected pack | 010-0050 | 010-0100 |
As an Amazon Associate I earn from qualifying purchases.
Print File 35-6HB 35mm negative pages, pack of 25
The wider page gives each strip room for a sixth picture. That is useful when a lab returns a 36-exposure roll in six equal lengths: the envelope can become one numbered page, without separating any neighboring frames. It also means there are just six places to file separate strips if you give each its own row.
Pros
- Fits a six-by-six roll on a single page without recutting
- Suitable for the SLB-1 hanger as well as listed binders
Cons
- Ten-inch width needs more cover clearance
- A seventh short strip needs another row even if earlier rows have room at the ends
Who it’s for: Pick this for six-frame lab cuts and a binder that covers the full width. Check your paper first if you make darkroom proofs.
Check Print File 35-6HB 35mm negative pages, pack of 25 on Amazon Paid linkPrint File 35-7B 35mm negative pages, pack of 25
The 35-7B trades one frame of row length for a seventh row. Seven strips of five stay in order on one page that Print File pairs with 8 × 10 contact paper. Its narrower footprint suits a different group of binders, though the sheet is taller than the 35-6HB. It is not a substitute sleeve for an existing six-frame strip.
Pros
- Seven separate rows suit five-frame cuts or sets of shorter strips
- Matches the manufacturer’s 8 × 10 contact-print layout
Cons
- Cannot hold all 36 full frames of a roll on a single page
- Five-frame rows do not accommodate an intact six-frame strip
Who it’s for: Choose this for five-frame cuts, especially if 8 × 10 is your proof size. Pass if keeping six adjacent frames intact matters more.
Check Print File 35-7B 35mm negative pages, pack of 25 on Amazon Paid linkCount the pieces in the envelope, not just the pictures
Take a 24-exposure roll as an example. Four strips of six fit the 35-6HB with two rows to spare. The same 24 pictures returned as six strips of four fit either page. Now put seven four-frame strips from an older envelope on the table. That is only 28 pictures, well below either advertised frame total. Yet if each strip gets its own row, only the 35-7B holds all seven on one page. Empty space to the right of a short strip is not another row.
An envelope with seven five-frame strips and one final frame is a different problem. The 35-7B will take the first 35, leaving the last without a row. Label a continuation page with the same roll ID and keep it immediately behind the first. The 35-6HB does not solve that example just because its headline capacity is 36: the roll is already in eight pieces. Do not assume moving it to a wider page will turn eight pieces back into six.
If the older envelopes came from several labs, sample one from each. Yesterday’s negatives may be cut in fours while new orders arrive in sixes. There is no need to standardize the film to standardize the archive. Use a page suited to each batch, then use one numbering system for all of them. For future rolls, ask what strip lengths the lab returns before asking it to change anything; a scanner carrier you already own may be the reason to keep your present cut.
Measure the binder with its covers closed
The wider page is also the shorter one. At ten inches across, the 35-6HB may project past a cover that comfortably protects a taller 35-7B. Conversely, a shallow box can have enough width but too little height for the 35-7B. The package measurements on a store listing do not answer either question. Use the page dimensions above, then check the manufacturer’s fit list for the binder you have.
For an unfamiliar binder, make a paper outline the size of the proposed page. Align the filing edge where an existing page sits on the rings, close both covers, then try the binder in its box or on its usual shelf. Can you turn the template without folding a corner? Does the outer edge sit behind the cover? This is a cheap way to spot a bad footprint; it does not establish that an unlisted ring pattern fits. If buying both parts new, choosing a documented pairing removes that uncertainty.
On a shared shelf, put the roll range on the binder spine: “Family rolls 021 to 044” is more useful when retrieving a negative than “Pictures.” The Brother PT-D220 vs Dymo LabelManager 160 comparison covers tools for that external label. Keep adhesive labels on the binder, away from the film; they are not needed to mark individual frames.
Choose the paper size if you make contact prints
A contact print is a roll index you can read as photographs rather than negatives. Print File specifies 8½ × 11 paper for the 35-6HB and 8 × 10 for the 35-7B, and describes proofing through either page. If the school darkroom issues only 8 × 10 paper, the 35-7B layout makes sense for film that already fits its rows. If your film arrives in sixes, talk to the darkroom about paper before changing how every roll gets cut.
The stated proof size is not a storage pocket for a finished print. If the goal is to turn a page and see a paper proof facing the corresponding film, allow for a separate print sleeve and give it the same roll ID. If you want them inside one combined preserver, look for a product that specifically lists both pockets. Neither of these 25-packs is that combined product.
Give a favorite frame a route back to the binder
Suppose the photograph you want is the third shot of a birthday cake, not the first two. A digital file named “birthday-final” offers little help when you want a new enlargement from the original. Put a roll ID and frame reference in the scan name or catalog, and put that roll ID on the page. If edge numbers are missing or ambiguous, agree on row order and frame position in your own index. Leave the original strips in sequence.
For example, “R042, row 3, frame 2” still points to a physical place after a scan moves to another drive. If portable storage is part of that workflow, the Samsung T7 vs Crucial X9 1TB drive guide addresses where to carry the scan files. The choice of drive has no bearing on the sleeve. The connection is the identifier you keep with both copies.
Leave either pack on the shelf if the material turns out to be mounted slides, medium-format film, or a roll you want to store uncut. Likewise, buy neither as a way to feed film into a scanner; check the scanner’s carrier requirements separately. For ordinary cut 35mm film, the deciding evidence is probably already in your hand: one strip to establish the length, the rest of its envelope to establish the row count, and the binder that has to close around them.
Official sources and further reading
Sources reviewed on November 5, 2026. Prices, availability and terms can change; recheck before buying.
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.