Laynie Hasan.

← All offer guides

Sewing & Craft Comparisons · Reviewed November 2, 2026

SCHMETZ Universal vs Jersey: Which 80/12 Needle?

For a pillowcase cut from woven cotton, start with the Universal. For a T-shirt cut from cotton jersey, start with the Jersey/Ball Point. Both fabrics can say “100% cotton” on the label. The difference is what the point meets: crossing threads in the pillowcase, interlocking loops in the shirt. These two SCHMETZ cards each hold five needles of size 80/12, so you can choose the point without also changing the needle size.

Best for

Home sewists choosing a single needle size for a known fabric and thread, especially those alternating between woven yardage and cotton knits.

Probably not for

A machine that calls for another needle system, a project that needs several needle sizes, or a pair of highly elastic leggings better suited to a Stretch needle.

Specifications at a glance

Manufacturer specifications for the exact versions compared
Check on the card or listingUniversal 80/12Jersey/Ball Point 80/12
SCHMETZ card SKU1709C1714C
Model number on Amazon US1709C70159
UPC036346317090036346317144
Selected contentsOne card, five size 80/12 needlesOne card, five size 80/12 needles
Needle system130/705 H130/705 H SUK
Point and eyeSlightly rounded point, regular eyeMedium ball point, regular eye
First seam to tryWoven pillowcase side seamCotton jersey T-shirt side seam

As an Amazon Associate I earn from qualifying purchases.

SCHMETZ Universal 1709C, size 80/12, five needles

The Universal has a slightly rounded point for both woven and knit materials. It makes sense as the needle left in a machine between a cotton apron and its woven pocket, provided the pocket layers still suit this size. The card gives you replacements for that same setup, not a smaller needle for the next project.

Pros

  • Useful for general sewing on wovens and some knits
  • Five of one size if you repeatedly sew the same fabric

Cons

  • Less rounded than the dedicated knit point
  • No alternate size for a sheer fabric or a bulky join

Who it’s for: Choose the Universal if most of your cutting pile is woven. If it already makes an intact, even seam on your occasional stable knit, that knit alone need not send you shopping.

Check SCHMETZ Universal 1709C, size 80/12, five needles on Amazon

SCHMETZ Jersey/Ball Point 1714C, size 80/12, five needles

The Jersey has a medium ball point shaped to slide between knit loops. That matters on a T-shirt: a cut loop can open into a hole beside what looks like a perfectly good stitch. The rounded end is about preserving the cloth; it does not give the stitching itself any extra reach.

Pros

  • Point designed to move knit loops aside
  • A dedicated replacement card for repeated T-shirt projects

Cons

  • Not the same design as a Stretch needle
  • One size offers no fallback if 80/12 is too coarse for a fine knit

Who it’s for: Pick the Jersey for a batch of knit shirts or pajamas when 80/12 suits the actual layers. For a mixed basket of mostly woven repairs, the Universal earns more use.

Check SCHMETZ Jersey/Ball Point 1714C, size 80/12, five needles on Amazon

Read the size after you check the machine

Start at the needle-system entry in your machine manual. The package markings 130/705 H and 130/705 H SUK identify the designs being compared; 80/12 by itself says nothing about machine fit. This is especially important if you keep a sewing machine and a serger on the same table. If the serger specifies ELx705, do not move a needle from either of these cards into it simply because the needle looks similar.

The 80 and 12 are metric and conventional designations for the same size, not a size range. Here the metric number corresponds to a blade diameter of 0.80 mm. Read the size recommendations for your fabric and thread before buying five identical needles. If you sew a fine blouse one week and repair a heavy jeans hem the next, a single-size card answers only the job for which you have already settled on 80/12.

Sew the pillowcase where the cuff meets the body

A flat scrap of pillowcase cotton tells you something about the long side seam. It tells you less about the spot where that seam crosses the folded cuff. Fold two offcuts exactly as the pattern directs, keeping the seam allowances in the same positions. Use the intended thread. Sew from the plain section across the thicker junction with the Universal, then turn the sample right side out so you see what will show on the bed.

If the plain section lies flat and the trouble begins only at the cuff, mark that spot before unpicking anything. Open the fold and look for an allowance doubled back on itself. Correct the fold and try the same needle again. Buying a Jersey needle changes the point, but it does not remove a layer of fabric from a corner. If you need to open a few stitches without nicking the sample, the Clover seam ripper comparison explains how the two handles differ.

Give the shirt seam room to move

Cut two offcuts with the grain and direction of stretch matching the shirt pieces. Make a side seam with the Jersey needle and the stitch your pattern or machine manual recommends for knits. Let the machine feed the cloth without pulling it from behind. For a cuff, make a second sample with folded ribbing against the sleeve fabric. That join is a different stack from two layers of the shirt body.

Match the cuff and sleeve at the pattern marks. If the pattern calls for stretching the cuff to fit, stretch the cuff between marks without stretching the sleeve along with it. The Clover Wonder Clips size guide is useful if your regular clips hide the notches; remove each clip before the presser foot reaches it. Let the finished sample relax on the table before judging whether the two layers have fed evenly.

Tell a cut loop from a broken stitch

Turn the shirt sample over and gently spread the seam as far as it will need to move in use. Look at the fabric beside the stitching. An opening that grows along a column of knit loops is different from a length of intact cloth where the sewing thread has snapped. Try the Jersey point for damage to the loops; if you already used a fresh Jersey needle, reconsider size before committing to the garment.

If the thread gives way while the cloth stays intact, revisit your stitch choice and the amount of stretch the finished seam needs. A shoulder seam and a cuff that must pass over a hand do different jobs. If stitches are missing on a highly elastic spandex blend, SCHMETZ recommends considering a Stretch needle: its eye and scarf differ from the Jersey design even though both have a medium ball point. Neither five-pack here is a substitute for that distinction.

Official sources and further reading

Sources reviewed on November 2, 2026. Prices, availability and terms can change; recheck before buying.

Commission disclaimer

This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.