Laynie Hasan.

← All offer guides

Art & Hobby Comparisons · Reviewed November 7, 2026

Speedball 4131 vs 4132: Which Lino Cutter Set Fits?

The two extra pieces in the Speedball 4132 are not two extra blades. One is a second handle; the other is a #4 square gouge. The 4131 already supplies both V sizes, both rounded U sizes and the knife. For a first print carved in stages, the single-handle 4131 is a sensible starting point. Choose the 4132 if you want two profiles mounted at once or your design calls for the square gouge.

Best for

Printmakers choosing an interchangeable cutter assortment for linoleum or a soft carving block, especially anyone deciding whether to keep a detail tool and a clearing tool ready side by side.

Probably not for

Someone looking for a complete printing kit, a pull-style Linozip set, or two identical stations for a class. Neither box supplies blocks, ink or a duplicate of every cutter.

Specifications at a glance

Manufacturer specifications for the exact versions compared
Included equipment4131 boxed set4132 boxed set
Manufacturer catalog number004131004132
HandlesOne redOne red and one blue
V profiles#1 small V and #2 large V#1 small V and #2 large V
Rounded U profiles#3 small U and #5 large U#3 small U and #5 large U
Square gougeNot includedOne #4 square U
KnifeOne #6One #6
Mount and storageHand-adjustable metal chuck; removable handle endSame chuck and storage arrangement on both handles

As an Amazon Associate I earn from qualifying purchases.

Speedball 4131 six-piece linoleum cutter set, red handle

One handle takes five different cutters. This lets a single carver move from a narrow V to a large rounded gouge without buying another handle, provided the work can pause for a change. A class list calling for Speedball cutters #1, #2, #3, #5 and #6 is describing the selection in this box.

Pros

  • Includes both the small and large V and rounded U profiles
  • One handle to move between a workbench and a class

Cons

  • Only one profile can be mounted at a time
  • Does not meet a materials list that specifically calls for the #4 square gouge

Who it’s for: Suits someone who likes to finish similar marks in one pass or already owns a compatible spare handle. Skip it if you need the square gouge in the box.

Check Speedball 4131 six-piece linoleum cutter set, red handle on Amazon

Speedball 4132 eight-piece linoleum cutter set, two handles

Two differently colored handles share six distinct cutters. The second handle makes a useful partner for a fine-line tool: leave the larger clearing profile in the other one as you move between parts of a design. The #4 also gives you a square profile to compare with the rounded #3 and #5.

Pros

  • Can keep two different cutters installed during one session
  • Includes the square gouge as well as the five profiles in the 4131

Cons

  • Two handles do not provide two copies of a favorite tip
  • Adds little if you only use one profile at a time and already have a square gouge

Who it’s for: Suits an alternating detail-and-background workflow or a class assignment specifying cutter #4. It is not a pair of independent six-cutter kits.

Check Speedball 4132 eight-piece linoleum cutter set, two handles on Amazon

Count the shapes, not just the pieces

There are two numbering systems on these packages. The assortment number describes a box; a number on a cutter describes a shape. Assortment No. 1 does not mean you receive only the #1 tip. Nor does a six-piece set mean six cutting edges: the handle counts toward the total. The useful comparison is five profiles on one handle versus six profiles shared between two handles. That arithmetic matters when buying to a supply list or replacing part of a borrowed studio kit.

Suppose your drawing has a dark leaf with pale veins. In a single-color relief print, the parts left high carry ink; the cut channels supply the unprinted lines. A narrow V is a candidate for those veins. A rounded gouge is a candidate for taking out the open area around the silhouette. Both boxes already contain those shapes. You do not need the 4132 merely because a drawing combines fine lines with a large background. Ask whether you expect to alternate between them, or do the detail and clearing as separate jobs.

The #4 is a different question. It is a square U rather than another size of the regular rounded U. If an instructor demonstrates a particular mark using that numbered tool and wants you to follow along, the 4132 has it. If a shopping list says only “small and large U gouges,” check before assuming it means #4; the 4131 includes #3 and #5. Neither manufacturer set page promises a particular printed line width for a numbered gouge.

One block, two ways to organize the carving

For a repeat border, start by marking the areas that must remain raised. You might carve all the short V-shaped notches across the full border, put that cutter away, and change to a gouge for the intervening spaces. In that order you only need a mounted tool for the current stage. The 4131 gives you a reason to plan those stages without denying you the other profiles when it is time to use them.

Now picture an illustration built one small motif at a time: carve the line around a petal, clear next to it, move to the adjoining petal, then come back to the line tool. That sequence repeatedly calls for the same two shapes. With the 4132, assign a profile to a handle color for the session. Looking for the red detail handle is different from opening the chuck for each transition. The benefit is the choice of working order, not a promised time saving or a change in the quality of the cut.

The pair of handles can also support a demonstration, with two profiles visible for students to identify. But count the tips before treating one 4132 as tools for two carvers. Two people cannot each use the included small V at the same time. If everyone needs to practise an identical mark simultaneously, count one handle and one copy of that specific cutter per active station. A box shared between two people who want different tools solves a different problem.

Make a proof before blaming the tool selection

A little test block can answer a more useful question than the piece count. Leave a raised strip, cut a short line beside it, and pull a proof that shows both. Write the cutter number on the paper beside the mark, not on the part of the block you intend to print. The comparison you want is between the carved channel and the mark on paper. A small hollow that looks prominent on the bare block need not read the same way in the finished image.

Keep the surface consistent when comparing profiles. The Speedy-Carve vs Speedy-Cut Easy block guide addresses the separate choice of carving material. If you are preparing for a class, use a scrap of the assigned material before making decisions about the final design. A mark made on a soft practice surface is a reference for that combo of block and cutter, not a specification for what the same hand motion will do on linoleum.

When a supposedly blank area leaves specks on the proof, inspect both the block and the inking step. Did you leave a high island? Did ink reach a part you meant to leave bare? Buying the square gouge is not the automatic answer to either question. If the separate problem is fitting a roller to your block and inking area, the two-inch vs four-inch soft brayer comparison covers that purchase. Neither cutter set includes a roller.

What to check at the bench and on the listing

These are sharp standard lino cutters, not Speedball’s separately named Linozip assortment. Follow the tool instructions, support the block on a stable surface and keep your other hand and body out of the cut path. Speedball recommends a bench hook in its carving lessons and teaches carving away from yourself. A second handle is useful only if there is a place to put the other sharp tool down without leaving an exposed edge in your reach. Have the handling and storage plan before starting, particularly in a shared workspace.

If you already have Speedball equipment, empty the kit carefully and take inventory by cutter number. Someone with an intact handle and a complete 4131 who wants only the square profile can consider a matching #4 cutter separately. Someone whose issue is a missing chuck component should check Speedball’s replacement parts rather than assume the blades are unusable. Check compatibility with the actual handle: the maker describes these cutters for its own lino handles, not every interchangeable carving tool.

Finally, match the listing to the job. The linked 4131 is the red single-handle set, not a refill assortment. The linked 4132 has a red and a blue handle but only one of each of six cutters. Choose the first for staged carving with the common V and U profiles. Choose the second for the square profile, for a frequently used pair of tips on the bench, or both. If the real need is everything required to make a first impression on paper, make a separate list for the block, ink, roller and paper before buying either box.

Official sources and further reading

Sources reviewed on November 7, 2026. Prices, availability and terms can change; recheck before buying.

Commission disclaimer

This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.