Laynie Hasan.

← All offer guides

Storage & Computer Comparisons · Reviewed October 31, 2026

Transcend RDF5 vs Anker A8370: Which SD Card Reader Fits Your Setup?

The black Transcend RDF5 plugs into USB-A and takes one card at a time. The gray Anker A8370 plugs into USB-C and can access a full-size SD card and a microSD card together. Choose by the port you have free and the cards you actually unload.

Best for

Photographers, action-camera owners and anyone importing SDHC, SDXC or their microSD equivalents to a compatible USB host.

Probably not for

CFexpress or CompactFlash media, native UHS-II transfer speeds, or a dock that supplies power and additional computer ports.

Specifications at a glance

Manufacturer specifications for the exact versions compared
What to checkTranscend RDF5Anker USB-C 2-in-1
Exact version linkedTS-RDF5K, blackA8370, retail model AK-A83700A2, gray
Plug on the readerUSB Type-AUSB Type-C
Full-size cards in scopeSDHC and SDXC, UHS-ISD, SDHC and SDXC, UHS-I
Small cards in scopemicroSDHC and microSDXC, UHS-ImicroSD, microSDHC and microSDXC, UHS-I
Using both slotsDo not insert two cards at onceCan access one card of each size together
UHS-II transfer modeNo; UHS-II cards operate in UHS-I modeNo; Anker specifies UHS-I slots

As an Amazon Associate I earn from qualifying purchases.

Transcend RDF5 USB-A Card Reader, Black (TS-RDF5K)

A direct-plug USB-A reader with a slot for each card size. This is the black K version of the RDF5, not the pink or white variant.

Pros

  • Native fit for a rectangular USB-A data port
  • No full-size adapter needed for microSDHC or microSDXC
  • Transcend explicitly documents how UHS-II cards fall back to UHS-I

Cons

  • Only one card may be inserted at a time
  • Cannot connect directly to a USB-C-only laptop
  • Does not take advantage of the UHS-II interface on faster camera cards

Who it’s for: A good fit for an accessible USB-A desk port and a routine that finishes one card before starting the next.

Check Transcend RDF5 USB-A Card Reader, Black (TS-RDF5K) on Amazon

Anker USB-C 2-in-1 Card Reader, Gray (A8370 / AK-A83700A2)

A USB-C reader for one standard-size SD card and one microSD card. The two-in-one label refers to its card slots; this model does not also have a USB-A plug.

Pros

  • Direct connection to a compatible USB-C host
  • Anker documents access to two differently sized cards at once
  • Can leave a camera card mounted while locating footage on a microSD card

Cons

  • Cannot hold two full-size SD cards
  • Takes up the USB-C port on a single-port phone during import
  • Both card slots are UHS-I, not UHS-II

Who it’s for: The more useful of these two for a USB-C laptop or compatible phone, especially with an SD camera and a microSD recorder.

Check Anker USB-C 2-in-1 Card Reader, Gray (A8370 / AK-A83700A2) on Amazon

Take a look at the computer, then open the card case

If your editing PC has a spare rectangular USB-A socket at the front, the RDF5 can live beside your card wallet and plug straight in. For someone who unloads one camera on Sunday evenings, that simple setup is a good reason to buy it. If your notebook has only the smaller oval USB-C sockets, the Anker is the direct match. Adding an adapter just to make the opposite plug fit means one more piece to remember when packing.

Check the port in its usual surroundings, not just the number on the computer specification sheet. A rear socket behind a monitor may be a poor place to insert a tiny card by feel. A side port might be occupied by the charger or sit next to a wide connector. Both readers have their plug on the body. If neither leaves you enough room to change cards without moving the computer, a reader with a short cable may be a better purchase.

A two-camera shoot exposes the difference between the slots

Picture a pair of cameras covering the same bike ride: a full-size SDXC card has the portraits at the start, and a microSDXC card has the ride footage. With the Anker you can leave both cards in the reader and use the host to locate the portrait and clip you want. Give each source its own destination folder, such as “start-line camera” and “helmet camera.” If each camera created a file numbered 0001, their files will stay separate when copied.

The RDF5 can handle that same pair of cards, just not together. Copy the first card, check the copy, eject it using the operating system and take it out before inserting the second. Do not park the microSD card in its slot while the full-size card is being read: Transcend rules out simultaneous insertion, not merely simultaneous copying. If both cameras take full-size SD, the Anker loses this particular advantage. Neither device has a second full-size slot.

Read the small print on the card itself

Three different details share the face of a typical card. Its physical size determines which opening you use. An SDHC or SDXC marking identifies a capacity family. A Roman numeral I or II identifies a bus interface, the way the card communicates with the reader. For example, a 128 GB full-size SDXC card and a 128 GB microSDXC card belong to the same capacity family but go into different slots. You do not need the plastic microSD-to-SD sleeve with either reader.

Transcend lists UHS-I SDHC, SDXC, microSDHC and microSDXC, and says a UHS-II card can work at UHS-I speed. Anker documents UHS-I for both slots. If the reason you are shopping is to shorten imports from a collection of UHS-II cards, look for explicit UHS-II support in the slot you plan to use. Likewise, a camera manual calling for CFexpress is describing a different card family altogether. A USB-C plug on a reader does not make its card slot a CFexpress slot.

What the USB speed number does and does not buy

A reader sits between two connections: the USB connection to the computer and the card connection inside the reader. Transcend specifies USB 3.1 Gen 1, also identified as USB 5Gbps; Anker advertises a 5 Gbps USB link. Those figures describe the USB side, in bits per second. They are not a measurement of how many bytes of photographs either reader saved to disk. A USB-C connector alone is no reason to expect the Anker to finish a single-card copy ahead of the USB-A RDF5.

When a transfer misses a deadline, notice which step took the time. If the copy window has closed but the photo app is building previews, changing the reader may not help. If video went first to local storage and then to a network folder, time those as separate jobs. When comparing your own setup, use the same card, the same folder of originals and the same destination, and separate time spent importing from time spent editing. This comparison reports specifications, not timed transfers.

Using the USB-C reader with a phone

The Anker is the natural starting point if you want to pull a few photos onto a compatible USB-C phone while the camera is packed away. First check that your particular phone supports external storage and the card format. A plug that physically fits is not a guarantee that every file will open in your preferred app. On iPhone, for example, Apple documents access to connected SD cards in Files and specifies supported file systems and a single data partition.

Try the process with a spare card before relying on it away from a computer. Find one image in the file browser, copy it to the phone and then open that copy after disconnecting the reader. That last step distinguishes saving a local copy from simply viewing the original on the card. Check the copied file size before planning a larger import: room for several photos does not mean room for a whole afternoon of long video clips. Neither reader supplies extra storage of its own.

Plan the destination before clearing a card

For a repeatable desk setup, create a dated folder on the destination drive and a subfolder for each card. Choose copy, not move, so the camera original remains available if the transfer is interrupted. Compare the number and size of the files you intended to transfer. For a video shoot, open a long clip from the destination and seek near the end; for a RAW shoot, check an actual RAW file, not just a small JPEG preview. These are spot checks, not a substitute for verifying an entire copy.

With the RDF5, return each completed card to a designated side of its case. With the Anker, check both mounted volumes before pulling the reader, especially if one copy operation ended before the other. Keep the originals until you have verified a separate backup of footage you cannot reshoot. The linked portable SSD guide compares two possible destinations; the microSD guide covers replacement cards. Neither choice changes the plug or the card interface on the reader you buy.

Identify the version at checkout

Look for TS-RDF5K on the black Transcend listing. For Anker, match A8370 to retail model AK-A83700A2 and look for the USB-C plug on the gray reader. Similar names can describe a USB-A Anker reader or a version with two different host plugs. The products here are standalone readers, not cards bundled with an adapter. If your laptop already has a suitable built-in slot and you only import one full-size card, try that first; a second reader may add nothing to the job.

Official sources and further reading

Sources reviewed on October 31, 2026. Prices, availability and terms can change; recheck before buying.

Commission disclaimer

This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.