Sewing & Craft Comparisons · Reviewed November 8, 2026
Clover 4.75 vs 7 Inch: Which Embroidery Hoop Fits?
Choose Clover’s small 8813 for an isolated motif or a narrow piece of cloth that cannot cover the larger ring. Choose the large 8812 when a wreath, inscription or group of raised stitches needs to stay in one opening. A four-inch square design is a good illustration: its corners are about 5.7 inches apart. It cannot fit inside the 4.75-inch circle all at once, even though each side is shorter than the hoop’s diameter.
Best for
Hand embroiderers matching a hoop to a printed transfer, counted chart or garment panel before cutting the cloth or starting raised details.
Probably not for
A machine attachment, a hands-free stand, or a stretcher frame to hold a whole cushion front with no contact between the work and a ring.
Specifications at a glance
| Hoop and layout detail | Small 8813 | Large 8812 |
|---|---|---|
| Clover’s labeled diameter | 4¾ in (12 cm) | 7 in (18 cm) |
| Construction | Inner ring and outer ring | Inner ring and outer ring |
| Largest square in a circle of that nominal diameter, before clearance | About 3.36 in per side | About 4.95 in per side |
| Example: centered 6 in wide fabric strip | Extends ⅝ in beyond each side of the nominal circle | Strip is 1 in narrower than the nominal circle |
| Example: 4 in square border in one position | No; the diagonal exceeds 4¾ in | Fits the nominal circle; allow room to work near corners |
As an Amazon Associate I earn from qualifying purchases.
Clover Small Embroidery Hoop, 4¾ inch, 8813
The small ring puts the rim close to a single flower, set of initials or other compact motif. It is the more useful of the two for an offcut that covers the small opening with room to grip but would fall short of the large one.
Pros
- Can hold a smaller piece of cloth
- Shorter reach from the rim to the middle of a centered motif
Cons
- Less clearance for the corners of a square transfer
- May need more moves across a wide continuous design
Who it’s for: Choose this size for a small working area, especially if the next place you need to put the rim is still blank. It need not match the size of the finished item.
Check Clover Small Embroidery Hoop, 4¾ inch, 8813 on Amazon Paid linkClover Large Embroidery Hoop, 7 inch, 8812
The larger ring keeps more of a composition visible and accessible. It can leave an entire name and its decorative flourishes in the opening when a smaller ring would have to move between words.
Pros
- More room for lettering, diagonals and raised details in one position
- Allows a wider gap between a centered motif and the rim
Cons
- Requires more surrounding cloth for a secure setup
- The center is farther from the hand gripping the rim
Who it’s for: Choose 8812 when the fabric can span the ring and the whole design benefits from staying put. If the cloth is already cut narrow, check that before comparing motif sizes.
Check Clover Large Embroidery Hoop, 7 inch, 8812 on Amazon Paid linkMake a paper window for the actual design
Start with the design at the scale you plan to stitch it. On scrap paper draw a circle 4¾ inches across and another 7 inches across. If using a compass, set it to half those measurements: 2⅜ inches and 3½ inches. Cut out the middles and look through each paper window at the pattern. These are sketches of the labeled hoop sizes, not templates for cutting fabric. Their job is to reveal the parts of a drawing that run into a circular edge. Keep a little space between the last stitch and your paper rim.
Try this with a four-inch square border. Place one window over all four corners, not just the center flower. In a square the diagonal runs about 1.414 times the length of a side, so those corners need a circle at least 5.66 inches across before there is any room to handle a needle. Turning the pattern does not shorten that distance. The 7-inch hoop makes sense for stitching that border in one position. Now take the border away: a central flower on the very same sheet may fit comfortably inside 4¾ inches. Measure what you intend to embroider, not the rectangle of paper around it.
An irregular drawing can be less demanding than its bounding box suggests. Two long leaves might reach the far left and right while nothing at all occupies the four corners. Instead of rejecting the small hoop on a calculation alone, move the paper circle over the outlines. Look especially at the tips. If the only questionable spot is blank background, keep the smaller size in contention; if your needle has to cross the rim to finish a leaf, move up or plan a second position.
Check the fabric outside the opening
Lay the windows on the actual fabric next. A hoop needs cloth between its two rings, not merely cloth under the drawing. For example, centering the 4¾-inch window on a strip six inches wide leaves five eighths of an inch beyond the nominal circle at either side. That is a starting point for a fit check, not a promise that every fabric is easy to grip with that margin. The 7-inch window already overhangs that strip. Having plenty of fabric above and below the design cannot make up for bare ring at the sides.
A shirt pocket adds another constraint. If you are making the pocket, mark the fold and seam lines on the uncut cloth and embroider while the panel is still flat. Then trim and assemble it. On a finished shirt, slip a hand inside the pocket and trace the route the needle will take. Holding the pocket and shirt front taut together looks tidy from above, but sewing through both would close the pocket. Check access to the back of the stitches as well as access for the hoop; a smaller circle alone does not fix a blocked needle path.
For a placement mark on dark washable fabric, the Clover Chaco Liner and triangle chalk comparison explains how each lays down a removable guide. Try the mark and its removal on an offcut before drawing the pocket fold. Keep that line distinct from the design: it tells you where the finished edge will be, not where the first row of stitches should go. If the design barely clears the fold now, a larger hoop will not move it farther away on the finished pocket.
Plan the second position before the first stitch
For a long sampler, neither diameter has to contain the whole piece. Slide the two windows over the design in the order you would stitch it. At each stop, notice what would lie underneath the rim. A row of little houses with blank lanes between them offers places to move a small hoop. A garland joined by a continuous stem may offer none. The useful distinction is not simply the number of moves. It is whether the next move puts the rings on bare fabric or on work you would rather not clamp.
Take a wreath with French knots for berries near its outside edge. If you can see the entire wreath through the 7-inch window, you can complete the knots without trapping one to reach its neighbor. If you own the small hoop already, look for another workable order: finish the flat outlines in sections, leave the berries until later, then place the hoop where the rim misses the completed clusters. Draw each position on a copy of the pattern first. If there is no such path, that is a concrete reason to choose the larger hoop or a frame.
The same question matters for loops made with a punch tool. Clover identifies both 8813 and 8812 for its 8800 Embroidery Stitching Tool. That does not make all yarns and needles interchangeable. The Clover punch needle and stitching tool comparison sorts out the tool and thread before you buy the hoop. Also consider where the loops will form: a clear view of the outlines on one face does not tell you what will be pressed underneath on the reverse when you move the ring.
Set the tension, then check the work off the hoop
Separate the rings and lay the inner one on a flat surface. Center the fabric over it with the fabric grain running the way you want the design to sit. Set the outer ring over the cloth and snug it gradually. Ease out slack around the circumference a little at a time. If a woven grid or printed stripe bends off course, lift and reseat the fabric; drawing harder on the opposite edge can trade one distortion for another. You want a flat working surface, not a temporarily stretched version of the pocket or sampler.
Work a few stitches on a scrap of the project fabric and let the cloth relax outside the hoop. If a smooth outline puckers when released, examine how hard you are pulling the thread before assuming the ring is too small. If the fabric gradually sags while stitching, check how it is seated before choosing a different diameter. Those are two separate sources of tension: the hoop holds the ground fabric while your stitching hand controls the thread. Buying a wider hoop does not correct a line drawn tight like a drawstring.
Finally, distinguish the working hoop from the display mount. A finished three-inch ornament can be stitched while the material is still a generous square, then cut to its pattern with the needed finishing allowance. There is no reason to struggle to grip an ornament-sized scrap throughout the project. Conversely, do not cut the backing to seven inches just because the design fit the larger hoop. Leave what the chosen finish needs at the back. Choose the working diameter for access to the stitches; choose the final mount for the border you want people to see.
Official sources and further reading
Sources reviewed on November 8, 2026. Prices, availability and terms can change; recheck before buying.
- Clover USA: small hoop SKU and U.S. and metric sizes
- Clover USA: large hoop SKU and U.S. and metric sizes
- Clover: inner and outer ring construction
- Clover: hoops recommended for the Embroidery Stitching Tool
- DMC: setting up a hand embroidery hoop and adjusting tension
- Amazon US: Clover 4¾-inch embroidery hoop Paid link
- Amazon US: Clover 7-inch embroidery stitching tool hoop Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.