Kitchen Tool Comparisons · Reviewed November 8, 2026
Norpro Ravioli Molds: 12 Small Squares or 10 Jumbo?
Choose the Norpro 1043 for a dozen 1.5-inch ravioli per tray, especially if you roll narrow sheets or want several small pieces on each plate. Choose the 1040 Jumbo for ten 2-inch squares with more room around each mound of filling. The two tools look much alike in a drawer. The difference is easier to see on a dinner plate, where four jumbo pieces occupy a very different patch of sauce from four small ones.
Best for
Home pasta makers who already roll sheets of dough and want a repeatable square shape for batches of stuffed pasta.
Probably not for
Rolling dough to an even thickness, making a single large egg-yolk raviolo, or cutting rounds and other shapes from a sheet.
Specifications at a glance
| At the worktop | Norpro 1043 | Norpro 1040 Jumbo |
|---|---|---|
| Ravioli per full frame | 12 squares | 10 squares |
| Width of each square | 1.5 inches | 2 inches |
| Frame length and width | 12 by 4.25 inches | 12.25 by 5.125 inches |
| Three full frames | 36 small ravioli | 30 jumbo ravioli |
| Tools for shaping | Frame and separate press; use your rolling pin | Frame and separate press; use your rolling pin |
| Care | Hand wash | Hand wash |
As an Amazon Associate I earn from qualifying purchases.
Norpro 1043 Ravioli Maker with Press
This is the 12-cavity model, not the similarly sized Norpro set with a mini rolling pin. Its 4.25-inch width gives an uneven hand-rolled sheet a little more latitude than the jumbo frame.
Pros
- Twelve smaller pieces per cycle suit a starter or a tasting plate
- Narrower frame is easier to cover with two matching strips of dough
Cons
- Less room to work around a bulky filling
- The included press makes the wells; you still need a rolling pin to close the tray
Who it’s for: Pick the 1043 if your idea of ravioli night is a dozen small ricotta squares per batch and you already have a pin you like.
Check Norpro 1043 Ravioli Maker with Press on Amazon Paid linkNorpro 1040 Jumbo Ravioli Maker with Press
Ten 2-inch squares leave room for a more substantial center. The frame is only a quarter-inch longer than the 1043 but nearly an inch wider, which matters when your sheets taper at the ends.
Pros
- Wider squares leave more space for a coarsely chopped filling
- Ten cavities make it easy to divide a batch into two fillings of five
Cons
- Two fewer pieces per full press than the standard frame
- Broader frame needs more usable width from each pasta sheet
Who it’s for: Choose the 1040 to make a few larger ravioli the focus of a plate. Skip it if your usual strip of dough barely covers the narrower model.
Check Norpro 1040 Jumbo Ravioli Maker with Press on Amazon Paid linkPut the two sizes on a plate
Cut a 1.5-inch square and a 2-inch square from paper and lay them on the plate you usually serve pasta on. The half-inch difference sounds slight until you see it on both sides: the small square covers 2.25 square inches, the large one covers four. That is the outline, not the size of the hollow that takes the filling. Both squares need a border where the top sheet meets the bottom.
For a dinner with two pasta courses, imagine three small ricotta ravioli in a shallow pool of tomato sauce, followed by something else. A single standard frame supplies that first course for four. If you want to set out two contrasting fillings side by side, five of each fit in one jumbo frame. You can put one of each on five plates. Neither example tells you how much dinner a person needs; it tells you how to divide the work.
If what you picture is a single raviolo opened at the table to reveal a whole egg yolk, neither outline is a good guide to fit. The 2-inch dimension on the jumbo includes the edges, and Norpro does not publish a yolk size or well capacity. Put the dough on the board and shape each piece around its particular filling instead. Buying the model called jumbo is not a substitute for choosing the seam yourself.
Measure the dough you roll, not just the roller
Flour the bench as you normally would and look at a strip you have actually rolled. Measure across its narrowest usable spot over a roughly foot-long stretch, ignoring ragged corners. A 5-inch strip can span the 4.25-inch frame of the 1043; it falls short of the 5.125-inch width needed to cover the whole surface of the jumbo. A roller with a nominally wide opening can still turn out a narrow sheet if you feed in a narrow piece of dough.
Allow some slack in the lower sheet. It has to travel down into each hollow, while the upper sheet only needs to reach across the filled pockets and their borders. If a strip covers the bare frame only when pulled tight, do not count on the press to stretch it into shape without shifting it. Roll a wider piece or start a fresh strip. On a hand-rolled oval, the middle often makes a better pair of rectangles than the tapered ends.
A mold does not thin the dough. You can roll both sheets with a pin, so a pasta machine is optional. If your real frustration is getting two sheets equally thin, the Marcato Atlas 150 and Imperia iPasta comparison covers the tool that does that job. Buying the wider mold first would still leave you with the same rolling problem and a little more area to cover.
Give the filling a border it cannot cross
Think about the largest solid piece in the bowl, not just the name of the filling. Ricotta with finely grated Parmesan can be portioned in small mounds on the 1043. A roughly chopped mushroom can occupy much of the same pocket by itself. Chop the mushrooms finer for the small tray, or pick the jumbo if you want distinct pieces. The extra width gives you another option for the cut of the filling; it does not make a wet mixture drier.
Make one trial pocket before spooning filling into the entire frame. Place it in the center and gently bring a scrap of dough down over it. Can you touch the two sheets together all around without pushing filling onto the ridges? If so, take note of the size of that spoonful. If not, lift a little out. A level teaspoon of one mixture and a heaped teaspoon of another are poor substitutes for seeing the border on your own tray.
For spinach and ricotta, squeeze the cooked spinach before chopping it and mixing it with the cheese. Otherwise liquid can spread toward the seam while the remaining pockets are being filled. Lower the top sheet gradually and press the dough together around the mounds to leave an escape route for air. A little cheese squeezed across a ridge is a reason to stop and clear it, not to roll the pin over that spot harder.
Work out the last tray before the first
If the recipe calls for 24 small ravioli, the 1043 fills that order in two passes. If the plan is 30 larger squares, three jumbo frames give you an exact count. Changing models halfway through a recipe changes more than the number of trips to the counter. A recipe that yields 24 small pieces is not a promise of 24 jumbo ones from the same ball of dough and bowl of filling.
For two fillings with similar colors, set a tray on either side of the frame and mark which is which before starting. Release a whole batch onto its appointed tray. If you split a single mold between two fillings, keep the two groups together as you separate them. Once a sheet of ricotta ravioli lands upside down next to the mushroom ones, the tidy identical edges that made the mold appealing will not help you tell them apart.
There is no need to roll a whole new pair of sheets for the last spoonful. Put it on a scrap that can fold over, press a border, and trim that one piece by hand. A knife is enough for a straight edge. For a scalloped finish or a freer choice of size, the Norpro single and double pastry wheel guide explains the difference between cutters. A wheel trims at the line you choose; it does not form a dozen pockets.
Release the sheet without undoing the seams
Norpro’s directions for the jumbo call for light pressure with the rolling pin at first, then firmer pressure until the zigzag outlines show. Tip the frame and tap to release the pasta. If two squares remain joined by a thin bridge, trim the bridge on the board. Pulling them apart by their filled centers puts tension on the very seam you just made. Set them down with a little room between neighbors so you can pick each one up by its edge.
Both molds call for hand washing. Before putting either away, check the valleys between the raised teeth for dough and let the frame and press dry separately. Keep the two pieces together in storage. The press forms the indentations before the filling goes in; it is not a lid to push down onto filled ravioli. For someone who likes changing the size or shape on every batch, keeping a wheel in the drawer instead may be the more useful choice.
Official sources and further reading
Sources reviewed on November 8, 2026. Prices, availability and terms can change; recheck before buying.
- Norpro: 1043 model, twelve-square yield, frame dimensions and hand washing
- Norpro: 1040 Jumbo dimensions, ten-square yield, sealing and release directions
- Norpro: illustrated instructions for the 1043 frame and press
- Vitamix: preparing spinach filling and sealing around it
- Amazon US: Norpro standard 12-cavity, 1.5-inch ravioli mold Paid link
- Amazon US: Norpro Jumbo 10-cavity, 2-inch ravioli mold Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.