Kitchen Tool Comparisons · Reviewed October 30, 2026
Norpro 52 vs 112 Pastry Wheels: Metal or Soft-Grip Handle?
Both tools give you a smooth wheel and a fluted wheel for cutting raw dough. The buying choice is chiefly the handle: rounded stainless steel on the 52, or a soft Santoprene grip on the 112.
Best for
Home bakers and pasta makers who want one handheld tool for both straight-edged strips and decorative scalloped dough cuts.
Probably not for
Anyone seeking an adjustable multi-wheel strip cutter, a dough roller, a powered pasta machine or a guaranteed leakproof ravioli seal.
Specifications at a glance
| Manufacturer detail | Norpro 52 | Norpro Grip-EZ 112 |
|---|---|---|
| Exact model | 52 | 112 |
| Cutting choices | Smooth and fluted wheels | Smooth and fluted wheels |
| Cutting material | Stainless steel | Stainless steel blades |
| Handle | Rounded stainless steel | Soft Santoprene grip |
| Stated dough uses | Pasta, pastry and cookie dough | Pasta, pastry and cookie dough |
| Handedness claim | Not specified in the cited page | Left- or right-handed use stated |
| Care information | Handwashing recommended | No cleaning method specified in the cited page |
| Quantity linked | One dual-wheel tool | One dual-wheel tool |
As an Amazon Associate I earn from qualifying purchases.
Norpro Stainless Steel Ravioli/Pastry Wheel 52
The stainless-steel version combines the two edge patterns with a rounded metal handle and a documented hanging hole. Norpro recommends washing it by hand.
Pros
- Metal handle for buyers who prefer an uncovered surface
- Both edge patterns are available on one tool
- Hanging hole provides an alternative to drawer storage
Cons
- No soft handle covering
- Handwashing is the recommended routine
- Does not set the distance between separate cuts
Who it’s for: Choose the 52 if a rounded steel handle suits your preference. Skip it if you specifically want a soft grip or a tool that cuts several evenly spaced strips together.
Check Norpro Stainless Steel Ravioli/Pastry Wheel 52 on Amazon Paid linkNorpro Grip-EZ Pastry/Ravioli Wheel 112
The Grip-EZ version retains the same two cutting choices but substitutes a soft Santoprene handle. Norpro explicitly describes use with either hand.
Pros
- Soft handle surface instead of bare steel
- Manufacturer explicitly addresses left- and right-handed use
- No need to change tools to switch between smooth and scalloped edges
Cons
- Adds no extra cutting pattern over the 52
- No spacing guide for repeated strips
- Cited product page does not establish a dishwasher-cleaning routine
Who it’s for: Choose the 112 when a covered grip is the feature you want. Skip it if your preference is all-metal construction or if verified dishwasher permission is essential.
Check Norpro Grip-EZ Pastry/Ravioli Wheel 112 on Amazon Paid linkStart with the edge your recipe needs
A smooth wheel is the straightforward choice when you want an undecorated edge on a strip or rectangle. A fluted wheel makes a scalloped outline. Think about lattice strips, the visible border of filled pasta or a shaped cookie before choosing the wheel. Both models offer these same options, so neither provides a special pattern that the other lacks.
This is a raw-dough cutting comparison, not a comparison of pizza-serving tools. A large pizza wheel may already handle a straight cut, but it does not necessarily give you the decorative edge you came looking for. Equally, if all your pastry work involves one plain trim, a suitable knife you already own may be enough. The second pattern should answer a real baking task.
Choose the handle by preference, not an assumed cutting advantage
The 52 has a rounded steel handle, while the 112 has a soft Santoprene grip. That distinction matters if you already know which surface you prefer on small utensils. Norpro describes the Grip-EZ handle as non-slip, but that is a stated design feature rather than a measured result from this comparison. It does not establish that the 112 cuts more accurately or requires less effort.
Consider how you hold a tool while following a marked line. Your fingers need a comfortable position without reaching toward the wheels, and the unused wheel remains part of the head while the other one is working. If you can examine either model, check that arrangement with your own grip. A claim of left- or right-handed suitability is useful information, not a guarantee that every hand will find the same position natural.
Lay out strips before making the first cut
Neither model fixes the width between successive passes. For a lattice top, decide the number and width of strips before cutting the sheet into pieces. Mark your intended positions with an appropriate food-preparation tool, then follow the layout. Buying the Grip-EZ rather than the stainless version will not replace that planning or turn freehand lines into a calibrated spacing system.
Think about the finished arrangement as well as the first few strips. If the sheet is irregular, reserve enough usable dough for the longest pieces before cutting smaller decorative ones from the edges. A multi-wheel cutter may be a different shortlist for someone who repeatedly needs parallel strips at a set spacing. These two are better understood as tools for individual lines, shapes and trims.
Rolling the sheet and cutting it are separate jobs
Get the dough to the thickness and condition your recipe calls for before reaching for a wheel. Neither tool rolls the sheet, controls its thickness or determines when it is ready to work. Our OXO-versus-Joseph-Joseph rolling-pin comparison covers that earlier preparation step. A new cutter cannot substitute for the recipe instructions that make the dough manageable in the first place.
Choose a work surface approved for cutting, and check the surface maker's directions. A baking mat or coated pan should not be assumed to tolerate a metal wheel simply because it is used for pastry. Leave room beside the dough for your hand and for the entire path of the tool. Cutting directly in a crowded pan can constrain that movement even when the individual pieces are small.
A decorative cut is not proof of a sealed filling
The manufacturers describe these models for pastry, pasta and cookie dough, including ravioli. Their smooth and fluted wheels provide edge choices; that does not establish that either replaces every joining or sealing step in a filled recipe. Follow the method for positioning filling and joining the dough, rather than judging the seal only by how tidy the outside looks.
Cutting also leaves a handling task. Decide where each piece will go before separating it from the larger sheet, and avoid using the wheel as a lifting blade. Our OXO-versus-Mercer bench-scraper comparison covers gathering and moving dough on a suitable board. That is a separate function from tracing a cut, and you may already have an appropriate tool for it.
Make cleaning access part of the decision
Norpro recommends handwashing the 52. Its inspected 112 page identifies the materials but does not state a cleaning method. Do not treat that silence as dishwasher permission or transfer instructions from a different Grip-EZ utensil. Use the directions supplied with the exact item, and obtain confirmation from Norpro if a particular cleaning method is a purchasing requirement.
With either design, inspect around both wheels and their attachment points after use. Dough left near a moving part needs attention even when the handle looks clean. Keep fingers clear of the edges while cleaning, and put the tool away so the exposed head is not an unexpected contact point when someone reaches into the drawer. The 52's hanging hole is another storage option if you have a suitable location.
Match the identity, then buy the feature you will use
The linked 52 listing identifies model 52 and UPC 028901000523, matching Norpro's page; it also contains an inconsistent part-number field, so use the matching model and UPC rather than that field alone. The linked 112 identifies model 112 and UPC 028901001124. Both checked listings are for one tool, not a multi-pack or a set of interchangeable wheels.
Choose the 52 for its steel handle and documented hanging option. Choose the 112 when the soft grip is your preference, without expecting another cutting pattern. Keep a working pastry wheel if it already meets those needs. Sources and identities were checked on October 30, 2026. This guide interprets manufacturer documentation, not hands-on testing or Amazon customer reviews, and makes no comparative claim about speed, durability or pastry results.
Official sources and further reading
Sources reviewed on October 30, 2026. Prices, availability and terms can change; recheck before buying.
- Norpro: model 52, dual edge patterns, stainless-steel construction, hanging hole, handwashing and UPC
- Norpro: model 112, dual edge patterns, stainless blades, Santoprene handle, handedness and UPC
- Amazon: model 52, matching UPC 028901000523 and one-tool identity; part-number field is inconsistent Paid link
- Amazon: model 112, UPC 028901001124 and one-tool identity Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.