Music & Hobby Comparisons · Reviewed November 9, 2026
Remo Ambassador vs Emperor: 14-Inch Coated Snare Heads
If you liked your Ambassador until the brush sweep wore a smooth path through its coating, buy the same head again. If the middle keeps denting under your backbeat, the Emperor gives you a reason to change: two layers of film and a less bright initial strike. Both are coated. Neither belongs on the underside against the snare wires.
Best for
Players replacing the striking surface on a standard 14-inch acoustic snare who want to keep a coated surface for both sticks and brushes.
Probably not for
Anyone replacing the thin bottom head under the snare wires, shopping for a quiet mesh practice surface, or fitting a different diameter.
Specifications at a glance
| What you are choosing | Ambassador Coated | Emperor Coated |
|---|---|---|
| Exact 14-inch part | BA-0114-00 | BE-0114-00 |
| Film under the coating | One 10-mil ply | Two 7-mil plies |
| Character described by Remo | Open tone with a bright attack | Warm, open tone with a softer attack |
| Where it goes on the snare | Top, where the player strikes | Top, where the player strikes |
| Reason to choose it | Keep a distinct stick sound on light notes | Prioritize durability under repeated accents |
As an Amazon Associate I earn from qualifying purchases.
Remo Ambassador Coated 14-Inch Drumhead (BA-0114-00)
One 10-mil layer makes this the medium-weight choice. Remo describes a bright attack, useful if you want to hear the tip of the stick at the front of a note.
Pros
- Distinct attack suits figures that alternate light taps and accents
- Coated face gives wire brushes a surface to sweep
Cons
- Not the two-ply option for a batter that regularly develops dents
- Open sound is a poor starting point if you want an already muffled snare
Who it’s for: For the player who likes an open snare and wants the notes between backbeats to speak clearly.
Check Remo Ambassador Coated 14-Inch Drumhead (BA-0114-00) on Amazon Paid linkRemo Emperor Coated 14-Inch Drumhead (BE-0114-00)
Two 7-mil layers give this head its heavier construction. Remo emphasizes durability and describes a softer attack; the outer face still takes brushes.
Pros
- Heavier build suits a rehearsal kit played hard by several drummers
- Warmer attack without switching to a clear playing surface
Cons
- A subtler attack may not suit a player who wants every light tap outlined
- Extra film beneath the surface does not replace worn brush texture on top
Who it’s for: For a drummer whose current head dents before the coating wears smooth, or who wants a rounder backbeat.
Check Remo Emperor Coated 14-Inch Drumhead (BE-0114-00) on Amazon Paid linkRead the evidence on the head you are taking off
Tilt the drum toward a window before undoing the hoop. Can you see a shallow dish where the stick usually lands, or is the head still flat with a shiny patch where the brush travels? Those are different reasons to replace it. A dented Ambassador that no longer gives an even note suggests trying the heavier Emperor. A flat Ambassador that still sounds right with sticks but loses its swish halfway through each brush circle makes a better case for fresh coating than for more film underneath.
If the old head still has its name, copy the whole name, not just the crown logo. The ordinary Ambassador Coated is not the Ambassador X or the Ambassador Vintage. The ordinary Emperor Coated is not the Emperor X. A photo of the small print and a recording of a few bars make useful notes for the next purchase. If the kit is shared, ask how it sounded when the head was new. Disliking a worn-out head tells you surprisingly little about whether you would dislike a fresh one of the same type.
One 10-mil layer or two 7-mil layers?
Here a mil is one thousandth of an inch, not a millimeter. The Emperor has two sheets that add up to 14 mils of film; neither sheet alone is thicker than the 10-mil Ambassador. Think of the choice in terms of two parts of a note: the tick when the stick lands and the sound of the drum that follows. Remo puts bright attack among the Ambassador’s features. For the Emperor it describes a softer attack but still an open tone. Two plies do not turn the Emperor into a mute.
Take a bar in which three soft notes lead into a hard backbeat. If you want the listener to hear three little consonants before the big beat, the Ambassador is the starting point here. If that same backbeat sounds too pointed and you would prefer more of the note and less of the click at its front, try the Emperor. Neither choice dictates a style of music. The drummer playing quietly through an amplified verse may want a different sound from the drummer playing the exposed snare introduction to the same song.
A brush sweep and a brush tap ask different things
Brush players do not have to rule out the Emperor. Both heads have coating for the wire tips to travel over. Imagine a slow ballad with the left hand drawing circles and the right hand lifting for a little tap on beat four. The circle depends on the brush staying in contact with a textured path. The tap uses the response of the struck drum as well. If the wash already sounds right but the tap needs more definition, the Ambassador’s brighter attack is a reason to favor it.
Look at the brush as well as the head. A loose strand catching on the surface can interrupt a circle even outside the worn patch. If you are also choosing the brushes, the Vic Firth Heritage and Jazz wire brush comparison explains the difference between the fans. Keep your usual pair for the first rehearsal with the new head. Changing the wires in your hand and the surface on the drum at once makes it difficult to tell which change gave the sweep its new sound.
Choose for the player who actually wears it out
A rehearsal room might host a quiet trio on Monday and a backline kit for three amplified bands on Saturday. Ask what usually prompts someone to change the snare head. If it is a dip in the middle after several hard-playing sessions, the Emperor’s two layers address the problem that keeps taking the drum out of service. If the head is replaced for a Sunday brush gig because the center has gone slick, the extra layer is in the wrong place to fix that particular problem.
Keep stick choice in the picture without treating it as a rule. A player using a larger stick lightly need not buy a two-ply head, and a smaller stick can still deliver a firm accent. The Vic Firth 5A and 5B wood-tip stick guide is relevant if hand feel is also changing. For a shared kit, ask players to describe a musical moment, such as losing the short roll into the chorus, rather than just requesting a louder snare. More definition and more resistance to wear are different requests.
Separate a head problem from wires and tuning
A snare that buzzes on one bass note but sounds fine through an unaccompanied fill is giving you a clue. Play that passage with the snare wires disengaged, then engage them and try it again. If what bothered you disappears with the wires off, investigate wire adjustment and drum tuning before replacing a good batter for its tone. If the pitch wavers after a stroke even with the wires off, tap near each lug at the same distance from the edge and listen for one area markedly higher or lower than its neighbors.
Remo recommends bringing the head to even tension around the drum. With a replacement, center the head and hoop, bring the rods up gradually, and work across the drum so one side does not take all the tension first. Leave the bottom head and the wire adjustment alone initially if both were working. Bring back the same short fill, then the bass passage. Keeping those settings lets you hear the top you just bought before trying to tune two heads and adjust wire tension by ear all at once.
Confirm the diameter, the side and the part number
A snare described as 14 by 5.5 inches takes its head size from the 14-inch diameter, not the shell depth. If there is no label, measure across the shell through the center with the head removed, not between the outside edges of the metal hoop. If an older drum has always been a tight or unusual fit, check its maker’s sizing guidance before ordering. Neither model in this comparison is a special oversize collar selected to solve a vintage fit problem.
Finally, follow the wires. The film they rest against underneath is the snare-side head and needs to be much thinner than either batter here. A search for “14-inch Ambassador” can turn up a snare-side head with the same family name. For the top, match BA-0114-00 for the standard coated Ambassador or BE-0114-00 for the standard coated Emperor. For the underside, set both aside. If you have the right side and size, let the part of the old head you want to keep or change decide between them.
Official sources and further reading
Sources reviewed on November 9, 2026. Prices, availability and terms can change; recheck before buying.
- Remo: 14-inch Ambassador Coated part number, single-ply film and applications
- Remo: 14-inch Emperor Coated part number, film layers and applications
- Remo: playing feel and attack of the Emperor Coated family
- Remo: mil thickness, batter heads and dedicated snare-side heads
- Remo: checking the tuning near each lug
- Amazon US: 14-inch Remo Ambassador Coated drumhead Paid link
- Amazon US: 14-inch Remo Emperor Coated drumhead Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.