WORX Pegasus WX051 vs DEWALT DWST11556: Which Folding Workbench?

The 1,000-pound numbers do not describe the same mode

WORX publishes two ratings for WX051: 300 pounds as a worktable and 1,000 pounds as a sawhorse. DEWALT states that the metal legs of DWST11556 support up to 1,000 pounds in its workbench configuration. Quoting only the largest number would erase the central difference and could lead someone to load the WORX table surface beyond its documented rating.

All of these figures are manufacturer ratings, not measurements performed for this guide. Load placement, surface condition, full leg engagement and the instructions still matter. A rating is not permission to stand on the workbench, use it as a ladder, or ignore project-specific support. Follow the manual and keep people clear of unsupported material.

WORX arrives as a clamping system

Pegasus includes two quick clamps and four clamp dogs. The dogs fit the table openings to help position irregular pieces, while the clamps secure work across a published maximum width of 18 inches. That bundled setup can be useful for a first portable bench because the listed clamping parts arrive with the table rather than remaining a separate shopping decision.

Included does not mean universal. Check the workpiece shape, clamp contact area and project instructions, and avoid clamping fragile material directly without appropriate protection. WORX also publishes a fixed 32-inch working height. Measure that height against the intended task because bending, reaching and tool clearance can matter more than the accessory count.

DEWALT centers the perforated work surface

DWST11556 uses a large top with holes throughout for trigger-clamp placement. DEWALT calls it compatible with trigger clamps but lists only the workbench in the package. Someone who does not already own suitable clamps should treat them as a separate requirement rather than assuming the product photos establish the included kit.

The opening handle can also serve as a tool hanger, which creates a simple place for a tool between steps. That convenience does not establish a load rating for every object hung there. Keep cords, sharp edges and hot tools out of walkways, and use storage designed for the item when the bench is folded or transported.

Conversion or rapid setup is the practical fork

WORX converts from worktable to sawhorse, allowing long material to be supported in a different orientation. Its official page also lists link locks for joining compatible work supports. That flexibility benefits projects that alternate between clamping on a surface and supporting lumber or another long workpiece.

DEWALT emphasizes setup and folding in less than three seconds. That manufacturer statement describes the mechanism, not a timed comparison made here. A quick fold can still require a clear floor area and attention to pinch points. The model is a workbench, not a documented sawhorse conversion, so choose it for the table mode it actually provides.

Transport planning favors published dimensions

WORX publishes a 30-pound weight, a 31-by-25-inch tabletop, 32-inch height and folded size of 35 by 25 by 5 inches. Those figures let a buyer check a closet, vehicle or wall slot before ordering. Its five-inch folded depth is compact, but the 25-inch width and 30-pound weight still matter on stairs or in a crowded garage.

DEWALT says the bench folds compactly and is easy to maneuver, but its current US page does not publish comparable dimensions or weight. This guide leaves those cells unstated rather than importing marketplace figures. If exact fit is essential, obtain the current manual or measurement from DEWALT before purchase instead of assuming two folding benches occupy the same space.

For either product, plan the storage route as carefully as the final slot. Doorways, stairs, vehicle openings and wall hooks can be more restrictive than the folded depth. Remove loose clamps or tools before carrying the bench, and keep hands clear of folding joints while changing modes.

Choose the mode and clamp kit you will use

Choose WORX WX051 when the project mix benefits from included quick clamps, clamp dogs, a published 31-by-25-inch surface and sawhorse conversion. Choose DEWALT DWST11556 when a higher documented workbench-mode rating, a perforated trigger-clamp surface and the quick-fold mechanism are the priorities. Neither has a manufacturer-documented adjustable height.

The verified Amazon ASINs are B01HREBZ3M for WORX and B076S565G9 for DEWALT. Confirm the model number because bundles and similar work supports can appear near either listing. No load, stability, setup-time or long-term durability test was performed. Work within the manual, inspect the locks and legs before use, and support each project according to its own hazards.