Laynie Hasan.

← All offer guides

Knitting & Craft Comparisons · Reviewed November 6, 2026

Clover 336 vs 3118: Kacha-Kacha or Mini Row Counter?

Choose the Clover 336 Kacha-Kacha when you want a separate push counter to keep beside your pattern. Choose the 3118 Mini when a pendant attachment and a locking lever are useful parts of your routine. Both advance one count per push and display 0 to 99. The Mini does not count more rows, identify a stitch or remember which project you picked up. Its practical advantage is how you carry and pause the counter, not a different counting range.

Best for

Knitters and crocheters who want to record one running count with a physical button and can give that count a clear meaning.

Probably not for

Automatic stitch detection, simultaneous project totals, three-digit counts on one display or identifying the exact stitch where a session stopped.

Specifications at a glance

Manufacturer specifications for the exact versions compared
Counting detailKacha-Kacha 336Mini 3118
Displayed range0 to 990 to 99
Advance controlPush the top once per countPush the button once per count
Reset methodTurn right and left gears in arrow directionTurn right and left notches in arrow direction
Locking controlNo locking control described by CloverSlide lever clockwise to lock; reverse to release
Attachment formatSeparate hand-operated counterPendant hole for your own cord
Materials listed by CloverABS resinABS resin and polyacetal
Compared Amazon packageOne 336 counterOne CLO3118 counter; neck cord not included

As an Amazon Associate I earn from qualifying purchases.

Clover 336 Knitting Counter Kacha-Kacha, one counter

The 336 makes sense as a dedicated part of a sitting-area setup: pattern, yarn, tools and a counter kept in an assigned place. Its counting job is straightforward, and the two side gears handle resetting. Choose it because a loose counter suits that setup, not because it has a wider counting range than the Mini. Both stop at two displayed digits.

Pros

  • Straightforward push-to-advance operation for one running count
  • Fits a workflow that keeps the counter beside the pattern rather than on a cord

Cons

  • Clover does not describe the Mini model’s locking control for this version
  • Needs a separate place in your setup and still requires a deliberate press

Who it’s for: Choose 336 for a consistent knitting spot and a loose counter you can keep track of. Skip it if a pendant attachment or a manufacturer-described locking lever is a purchase requirement.

Check Clover 336 Knitting Counter Kacha-Kacha, one counter on Amazon

Clover 3118 Mini Knitting Counter Kacha-Kacha, one counter

The Mini adds a pendant hole and a lever that locks the count-advance mechanism. Those features are relevant when you want the counter attached to a cord and when you put work aside between sessions. They also add decisions: supply your own cord, decide where the counter will hang and remember to release the lock before continuing. The selected listing identifies the model as CLO3118.

Pros

  • Locking lever provides a deliberate paused state
  • Pendant hole gives the counter an attachment option instead of requiring a nearby surface

Cons

  • Pictured neck cord is not included in the compared Amazon listing
  • Lock must be released before counting resumes, and the display still handles only one count

Who it’s for: Choose Mini when its attachment and lock fit your habits. Skip it if you need several separately labeled counts or expect the pendant design to record work without your input.

Check Clover 3118 Mini Knitting Counter Kacha-Kacha, one counter on Amazon

Start with where the counter will live

Picture the exact place you normally finish a row. You might have the pattern on a side table, on your lap or on a stand across from your chair. The counter should have a consistent position in that arrangement. If the pattern and counter can stay together within reach, the 336 is a reasonable match. If you change chairs or regularly work without a nearby table, the Mini gives you an attachment point to consider. That is a location decision, not evidence that one button registers more accurately than the other.

The Mini’s pendant hole does not oblige you to wear it. Decide whether wearing a cord actually suits your work position and whether the hanging counter would interfere with the project. The Amazon listing specifically excludes the pictured neck cord, so do not count on receiving a ready-to-wear necklace. Clover also cautions against pulling the cord with excessive force because it can become caught in the body’s gap. Treat the attachment as a way to locate the tool, not a handle for tugging it out of a crowded bag.

For a counter that stays loose, assign a small compartment or other predictable storage place and put it there at every pause. For the Mini, include the locking step in that same routine. Either choice still needs a written project label if several works in progress share a bag. A number on its own does not tell you whether it belongs to a sleeve, a scarf or yesterday’s practice swatch. Buying the more portable format does not solve that labeling problem.

Define what one press means before you begin

A useful default is to let the display mean completed rows. Start at zero, work the first row, then press once. Under that convention a display of 12 means row 12 is complete and row 13 is next. You could instead use a different convention, but write it on the pattern and keep it consistent. Switching between the row being worked and the row just completed is enough to create a one-row discrepancy even when the counter itself has registered every press correctly.

Keep the action tied to a specific stopping point. For flat knitting, that could be after the last stitch and before turning. For crochet worked in rounds, use the boundary specified by your pattern. Do not add a second press merely because you moved a marker, joined a round or turned the work. Those actions can happen at the same boundary without representing extra completed rows. The counter has no way to distinguish a deliberate row entry from an extra tap.

Try the convention on a small section before relying on it through a complicated shaping sequence. This is a check of your bookkeeping, not a performance test of either product. At the end of the section, compare the number with the written instructions and the work itself. If you find it natural to reach toward the pattern for a press, that favors the loose 336 arrangement. If you consistently look for a counter attached near you, the Mini format may better match the action you are trying to repeat.

Separate a pattern repeat from an overall row total

One two-digit display cannot independently show an overall row total, a position within a pattern repeat and the number of shaping events. Decide which of those values you need to see most often. For an eight-row chart repeated six times, you might use the counter for completed rows within the current repeat and record each finished repeat on paper. Another valid approach is to keep an overall total on the counter and mark the current chart line separately. Neither method makes the tool smarter; each assigns it one well-defined job.

For example, with an eight-row repeat and a counter that records total completed chart rows from zero, 19 completed rows means two full repeats plus three rows of the next repeat. That arithmetic only applies if the count started exactly at the chart’s beginning. Border rows, setup rows and partial repeats can change the relationship. Write down the starting point rather than assuming that the number visible on the counter can always be divided directly by the repeat length.

The same discipline matters when the project exceeds 99 rows. Neither model has a hundreds digit. Before reaching that limit, decide how you will record completed blocks or switch to another counting method. A note such as completed 100-row blocks plus current remainder can preserve a total, but only if you update both parts consistently. If you want one glance to show a three-digit total without a supplementary note, these are the wrong counters. The Mini’s smaller-format name does not mean the 336 offers an extra digit.

A pause can require more information than a number

Stopping halfway across a row is different from finishing it. If the display represents completed rows, leave it unchanged and note that the next row is partly worked. Record any additional detail that would otherwise be ambiguous, such as the pattern section, the direction you were reading a chart or an increase already made. A physical counter is a convenient place for a number; it is not a substitute for all the context needed to resume a piece correctly.

Before packing the Mini, note the displayed count and engage its lever as Clover directs. When resuming, read the note, release the lever and confirm which row comes next before working. The lock addresses unintended advances; it does not certify that the saved number was correct or remind you to release it. With either counter, do not press experimentally while deciding whether you already recorded the last row. First resolve that question from the work and your notes, then set the count deliberately.

Undoing work creates another bookkeeping task. If you remove three completed rows, the saved total needs to reflect that change before you start again. Do not assume either tool offers a separate undo history. Clover’s instructions describe resetting with the side gears or notches in the arrow direction. Follow those instructions to establish the correct number rather than forcing a control backward. Keep a brief note of the corrected position if the repair ends in the middle of a chart repeat.

Keep a location marker separate from the tally

A stitch marker and a row counter answer different questions. A marker can identify a location in the work, while a counter holds the running number you assign to it. In a crochet spiral, for example, a marked boundary and a count of completed rounds can work together. The display does not show where the first stitch sits. The locking vs split-ring stitch marker comparison covers that separate choice of how to mark a location.

Neither counter measures the size of your stitches or confirms that you are following the intended gauge. A correct row tally and the wrong stitch size can coexist. Keep the pattern’s measuring and swatching instructions separate from your counting routine, especially when changing tools. If you are choosing a 5 mm crochet hook as well, the Clover Amour vs Soft Touch guide examines that grip-format decision. The counter choice does not make one hook an equivalent substitute for every project.

The final purchase check is therefore short: select the exact 336 or 3118 model, confirm that the linked offer is the single counter you intend to buy, and decide how the count will be labeled between sessions. Choose 336 if a loose push counter already fits your workspace. Choose Mini if you will actually use its pendant hole and locking lever. If paper notation already handles your project comfortably, there is no need to add either tool solely because the pattern contains numbers.

Official sources and further reading

Sources reviewed on November 6, 2026. Prices, availability and terms can change; recheck before buying.

Commission disclaimer

This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.