Craft & DIY Comparisons · Reviewed November 5, 2026
Clover Locking vs Split Ring Stitch Markers: 353 or 347?
If you need to find the last increase on a half-knit sleeve when you unpack it tomorrow, choose the Clover 353. Its tip closes into a catch that you can check before putting the work away. If you move a marker at the start of every crochet round, consider the Clover 347. Its split ring slips into and out of a stitch without a separate catch to operate. Both can mark a finished stitch well below your needle or hook.
Best for
A knitter or crocheter who wants to attach a removable marker to the fabric itself, whether the marker stays for several days or moves every round.
Probably not for
Parking the live stitches of a whole sleeve or keeping a written tally of rows. A stitch holder and a row counter do different jobs.
Specifications at a glance
| What to check | Locking Stitch Markers | Split Ring Markers |
|---|---|---|
| Clover item number | 353 | 347 |
| Markers in one pack | 20 | 24 |
| Material | Polyacetal | Polyacetal |
| How it comes out | Release the tip from the catch and withdraw it | Guide the yarn back through the opening |
| Good reason to choose it | Leave a reference on a piece that travels | Move a reference as soon as you reach it |
| Between projects | Clover advises keeping the marker shut | No catch to close before putting it away |
As an Amazon Associate I earn from qualifying purchases.
Clover Locking Stitch Markers, No. 353, pack of 20
The 353 works like a small safety pin in shape, but the point belongs in the opening of a stitch, not through the yarn. Once the point is seated, you can see whether the marker is closed. That matters on a pair of sleeves: a few days later the marked row may be the only record on the first sleeve of exactly where you began its shaping.
Pros
- Visible closure to check before storing the work
- Can be attached to an earlier row without taking stitches off a needle
Cons
- Catch has to be operated each time the marker moves
- Four fewer markers in a standard pack than the 347
Who it’s for: Choose the 353 when losing the mark would mean reconstructing several rows. Skip it when you mainly need to shift one marker from stitch to stitch.
Check Clover Locking Stitch Markers, No. 353, pack of 20 on Amazon Paid linkClover Split Ring Markers, No. 347, pack of 24
Look for the break in the ring. Guide its tip into the stitch opening and turn the marker until the yarn sits inside the curve. Reverse that movement to take it out. This suits a sequence of short rounds: you handle the same marker frequently and can leave the other 23 in the packet.
Pros
- No separate latch to open during a count
- Pack of 24 for laying out several temporary positions at once
Cons
- No closed catch to check when putting work away
- Removing it calls for turning the split back to the yarn, not pulling straight down
Who it’s for: Choose the 347 for a marker you move at the worktable. Pass if you specifically want to fasten the tip shut before dropping a project into a bag.
Check Clover Split Ring Markers, No. 347, pack of 24 on Amazon Paid linkDoes the pattern mean a stitch or a space?
A knitting instruction to place a marker on the needle usually marks the space between two stitches. The marker travels from one needle to the other when you reach it on the next row. A marker attached to the fabric has a different meaning: it records a particular stitch in a particular row. Knit another inch and the marker stays where you put it. Knowing which job the pattern intends matters more than the shape of the marker.
Consider a hat with four decrease lines. Four rings sitting on the circular needle can announce where to make decreases on the current round. Four markers clipped into the first decrease round can show where the shaping began, but will not arrive at the needle tips to remind you. If you routinely want the first function alone, a plain closed ring that fits the needle may be all you need. Buy a removable style when you also want access to the fabric below.
Leave a record of the shaping on a sleeve
Suppose the instructions say to increase at each end of a row, then repeat those increases every sixth row. Work the first increase row and fasten one 353 into the edge stitch on that row. Pick one edge and use it consistently. Both ends were shaped on the same row; marking both ends adds hardware without telling you anything more about the interval.
Treat the marked row as row zero. Work five more rows, then increase on the sixth. Before moving the first marker, put a second one into the new increase row and count the row spaces between the two. Counting the marked rows themselves as one and six would leave only five spaces. Leave the first few markers in until you can read the spacing, especially if a dark yarn makes an increase hard to pick out.
For a second sleeve, retain one marker at the first increase on the finished sleeve and another at the last. Lay the pieces with their cuffs aligned. The markers show you which part of the shaping to compare, and a count of the intervening rows settles the question if the two sleeves have stretched differently. A split ring can do this at the table; the 353 is the choice if the first sleeve will ride in your project bag for a week.
Move one ring around a crochet spiral
On a single-crochet tube worked without a joined seam, the first and last stitches of a round look much like their neighbors. Suppose your pattern calls for 24 stitches per round with no increases. Put a 347 through the top of the first completed stitch. Count that stitch as one. After 23 more, the next stitch waiting to be worked should be the one holding the marker.
Take the ring out, crochet into that stitch, then put the ring into the new stitch you just made. If you return to the marker after only 22 more stitches instead of 23, pause there. Count the tops of the completed stitches before making another. Adding a stitch beside the marker to reach 24 could hide a missed stitch elsewhere; the marker identifies the boundary, not the cause of the discrepancy.
A tight stitch does not need to be stretched around a marker. If the point keeps going through individual plies, back it out and look for the opening under the top loops. If the stitches are too tight to work comfortably even without a marker, the Clover Amour and Soft Touch hook comparison separates handle differences from hook size. The two hooks compared there are both 5 mm; use the size that gives your pattern gauge.
Plan the drawstring before threading it
On a bag with a round of evenly spaced eyelets, mark the two proposed exits before running the cord. For 12 eyelets and exits opposite each other, mark eyelet one and eyelet seven: there are six steps around the rim in either direction. Slip a split ring into a stitch beside each opening. Now fold the bag so that you can see whether the exits land where you want them relative to a seam or motif.
Moving a pair of rings one eyelet to the left is simpler than unthreading the cord. Once you like the alignment, thread it and remove both markers. If you plan to knit the cord yourself, the Clover French Knitter and Wonder Knitter comparison explains how peg count changes your cord options. Check a short sample through an actual eyelet before making the full length.
Official sources and further reading
Sources reviewed on November 5, 2026. Prices, availability and terms can change; recheck before buying.
- Clover USA: locking model 353, pack count, material and storage advice
- Clover USA: split ring model 347, pack count, material and placement
- Clover Needlecraft: example of moving a first-stitch marker up each crochet round
- Lion Brand: distinguishing repeat boundaries, problem stitches and round starts
- Amazon US: Clover Lock Ring Markers, 20 per pack Paid link
- Amazon US: Clover Needlecraft Split Ring Markers 347, 24 per pack Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.