Sewing & Craft Comparisons · Reviewed November 3, 2026
Clover French Knitter vs Wonder Knitter: Which Spool?
For a bracelet pattern written for five pegs, get the French Knitter. For a long run of three-peg cord, get the Wonder Knitter. Both Clover tools make knitted cord by lifting loops over pegs, and both can incorporate beads. What changes is the head in your hand: the French Knitter offers three neighboring peg counts, while the Wonder Knitter lets you feed the yarn through a guide and turn a disk as you work.
Best for
Someone making a specific length of cord for a bracelet, bag closure or stitched-on motif and deciding which spool to keep beside the yarn.
Probably not for
A knitter who wants a hand crank to form the stitches, a loom for an entire hat, or a boxed project with all the beads and findings supplied.
Specifications at a glance
| Check before choosing | French Knitter | Wonder Knitter |
|---|---|---|
| Clover article number | 3100 | 3101 |
| Heads in the package | 4, 5 and 6 pegs | 3 and 6 pegs |
| Tool components | One body, three heads, one hook | One body, two rotating disks, one hook |
| Useful distinguishing feature | A four- or five-peg option | Side yarn guide and rotary disk |
| Can incorporate beads? | Yes | Yes |
| Project materials | Choose thread, beads and fastening separately | Choose yarn and any embellishments separately |
As an Amazon Associate I earn from qualifying purchases.
Clover French Knitter Bead Jewelry Maker, 3100
The three heads are most valuable when you already have a design in hand. You can follow a four-peg layout without having to translate it to three or six. For a bracelet where the cord ends disappear into a clasp, the middle option is also worth a sample: work the same thread on five pegs before deciding which end fitting to buy.
Pros
- Both four- and five-peg heads included
- Six-peg option for switching projects without buying a second body
Cons
- No dedicated three-peg head
- Extra heads are of little use for a single repeating six-peg design
Who it’s for: Choose the 3100 for patterned beadwork when peg count is part of the instructions. Skip it if the job is yards of the same three-peg cord.
Check Clover French Knitter Bead Jewelry Maker, 3100 on Amazon Paid linkClover Wonder Knitter, 3101
The side guide positions the working strand while you rotate the head to bring the next peg to your hook. This gives a long plain cord a straightforward rhythm. The disk does not knit by itself: you still lift the lower loop over the strand at each peg. Think of it as changing how you reach the next stitch, not changing who makes it.
Pros
- Three-peg head for a narrow cord and six-peg head for a wider option
- Rotating head brings each peg to the same working position
Cons
- No four- or five-peg head for patterns that specify one
- Manual loop lifting throughout even on a long length
Who it’s for: Pick the 3101 for repeated ties or decorative cord when you want that yarn feed. If you need one short tie and already know how to knit an I-cord on needles, neither tool is essential.
Check Clover Wonder Knitter, 3101 on Amazon Paid linkStart a bracelet at the clasp end
Lay out the clasp, a few beads and the actual thread. There are two different holes to think about. The hole through the bead needs to admit the working thread. The opening in a cord end needs to accept the finished bundle of stitches. A bead sliding neatly onto one strand tells you nothing about whether five pegs of knitted thread will fit that metal end. If you have not bought the findings yet, take a finished sample along when you choose them.
For a five-peg design, start the sample on the French Knitter’s five-peg head and include the intended bead spacing. Work a short plain section at each end. Try one plain end inside the fitting without glue or a permanent crimp. Then curve the beaded section around your wrist. A section that looks well spaced when hanging straight may bring neighboring beads against each other on the inside of the curve. Adjust the number of plain rounds between beads on this short piece, not after knitting an entire bracelet.
Clover’s fishtail rubber-band bracelet is a useful exception to the idea that a four-peg head always means four active stitches. That project calls for the French Knitter’s four-peg head but actually stretches bands across just two pegs. If you want to follow it, buy the specified layout and gather the bands and S-clip separately. Do not choose the Wonder Knitter on the assumption that a disk with more pegs reproduces the same spacing.
Size a drawstring by the opening it has to travel through
For a project bag, try the Wonder Knitter’s three-peg disk first. Feed a finished sample through the narrowest part of the casing, including the point where the side seam crosses it. If the bag uses two ties running in opposite directions, thread two pieces through together. A single length gliding through an empty channel is not the test the finished bag has to pass. If the cord jams, try a finer yarn before committing to knitting the full length.
Work out length with scrap string, not a ruler across the closed bag. Thread the string through the full route, open the bag wide and leave the ends long enough to grip. Mark that length, then lay it beside the knitted cord without pulling either one tight. If you want a decorative stop, thread the cord before attaching it. The Clover pom-pom maker size comparison helps with that separate choice: a pom-pom that will not pass through the opening belongs on the end after threading.
When both have six pegs, compare the motion
Suppose you are making a word in cord to stitch across a cushion. Both tools give you six pegs. On the Wonder Knitter, seat the yarn in the guide, turn the disk to bring the next peg around and lift the old loop with the hook. For this job, that repeated movement is the reason to buy the 3101. On the French Knitter, the reason to buy the 3100 is that after this six-peg word you can reuse the body for a four- or five-peg bracelet.
Peg count is not a finished diameter. On paper, draw the tightest bend in your lettering full size. Pin a few inches of finished cord along the inside of a loop, such as the opening in a lowercase e. If that opening disappears, the cord is too thick for the drawing even if you like it in a straight line. Enlarge the lettering, sample finer yarn or choose a head with fewer pegs. If you actually want a flat strip of stitches rather than a rounded outline, a regular crochet hook and a pattern for flat work may be the better purchase.
Plan the beads before winding on the yarn
On the Wonder Knitter, Clover shows the beads threaded onto the yarn before knitting begins. Set out your color repeat in a line and note which bead will reach the working end first. For a one-way motif, make a miniature repeat and check it on the cord; a pleasing sequence on a tabletop can read backwards from the fastening end of a bracelet. Leave the next beads down the strand until the part of the pattern where you actually need them.
For a second matching tie or bracelet, keep the sample with a note naming the yarn, head and spacing you used. Write down finished length after taking the piece off the pegs rather than counting the cord still inside the body. These notes matter more than the word “small” on a supply list. They also make the choice between tools easy next time: four or five points you to the 3100, three to the 3101, and six lets the working motion decide.
Official sources and further reading
Sources reviewed on November 3, 2026. Prices, availability and terms can change; recheck before buying.
- Clover: article 3100 French Knitter, included components, peg counts and intended materials
- Clover: article 3101 Wonder Knitter, rotary disks and included hook
- Clover Needlecraft: comparing the head choices and the Wonder Knitter yarn guide
- Clover: Wonder Knitter instructions for feeding yarn, turning the disk and adding beads
- Clover Needlecraft: fishtail bracelet pattern, four-peg head, bands and S-clip
- Amazon US: Clover 3100 French Knitter with three interchangeable heads Paid link
- Amazon US: Clover 3101 Wonder Knitter, pink Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.