Sewing & Craft Comparisons · Reviewed November 4, 2026
Clover 9940 vs 9941: Which Tassel Maker Fits Your Project?
A pattern that calls for a 7 cm tassel points straight to the Large Clover 9941. A bookmark that needs a 7 cm total drop might call for the Small 9940 instead. The hanging cord takes up some of that drop, and its length is a choice you make separately. Before picking a tool, mark where the top of the tassel itself will sit and where the cut ends should land. The distance between those marks is the one to compare with Clover’s scale.
Best for
A crafter winding embroidery thread or yarn into repeatable tassels for bookmarks, zipper pulls, cushions or a line of decorative trim.
Probably not for
Someone who wants ready-made tassels, a continuous fringe, a pom-pom, or a frame with a finished-length setting beyond 10 cm.
Specifications at a glance
| What you can set | Clover 9940 Small | Clover 9941 Large |
|---|---|---|
| Preset finished tassel lengths | 3, 4 or 5 cm | 6, 7, 8, 9 or 10 cm |
| US size markings | 1 3/16, 1 9/16 or 2 in. | 2 3/8, 2 3/4, 3 1/8, 3 1/2 or 4 in. |
| Examples of winding material | Embroidery thread or wool yarn | Embroidery thread or wool yarn |
| Tool materials listed by Clover | ABS resin and iron | ABS resin and iron |
| Selected US item | One Small maker, UPC 051221799402 | One Large maker, UPC 051221799419 |
As an Amazon Associate I earn from qualifying purchases.
Clover 9940 Small Tassel Maker
The Small frame gives you three short body lengths without first winding a long tassel and cutting most of it away. That matters for a dozen party favors made from the last of a particular thread color. It also lets you make a little more or less fringe while keeping the body short: use the same length setting and adjust how much thread you wind.
Pros
- Direct settings for three compact lengths, including 3 cm
- Shortest frame setting leaves less surplus to trim for a small motif
Cons
- No 6 cm or longer body setting
- Shortening a sample with scissors is possible; adding length to its already-cut strands is not
Who it’s for: Pick the 9940 when the tassel itself needs to sit close to the attachment, even if the loop above it is long. Skip it if your pattern needs a long sweep of loose strands.
Check Clover 9940 Small Tassel Maker on Amazon Paid linkClover 9941 Large Tassel Maker
The Large is useful when the body of the tassel is meant to be seen from across a room: think of two substantial ends on a cushion tie rather than a short accent beside a zipper. Its five settings give you longer options, but none duplicates the Small frame’s three marked sizes. The 9941 is not simply the 9940 with two more stops.
Pros
- Direct settings from 6 through 10 cm
- Several long settings for comparing proportions without changing tools
Cons
- No marked setting below 6 cm
- Cutting a long bundle back to a much shorter length spends extra thread and adds finishing work
Who it’s for: Choose the 9941 for longer bodies on décor or bags. If the only long part of your design is its hanging cord, you may have no use for the bigger frame.
Check Clover 9941 Large Tassel Maker on Amazon Paid linkStart with the attachment point, not the end of the yarn
Take a bookmark and hang a spare length of string through its hole. Close it inside the kind of book you use. How much string should reach past the book before the decorative part begins? Put a knot or pencil mark there, then mark the lowest point you want the ends to reach. This mock-up separates the useful cord that clears the pages from the visible bundle that sits outside them. Measuring from the hole straight to the floor can send you shopping for the wrong tool.
For example, a design with 2 cm of visible cord below the hole and a 5 cm tassel gives about 7 cm of total drop in that arrangement. The 5 cm portion is a Small setting. A different bookmark with its tassel head immediately below the attachment could use the Large frame’s 7 cm setting for roughly the same overall silhouette. Neither figure tells you how long to cut the cord before tying: allow for the way you will tie, loop or wrap it around the finished piece.
A bag adds one more check. Put the zipper at both ends of its travel and hold your string sample against it. A tassel that clears the pocket opening when the bag is shut can lie across that opening when it is open. Shorten the sample until it hangs where you want it, then measure the body. If you are making the drawstring itself, the Clover French Knitter vs Wonder Knitter guide covers that separate cord-making job. A winding frame makes the ornament, not a knitted length of cord.
Change the length, the fullness or the neck?
Those three adjustments do different things. Moving the frame changes the nominal finished length. Adding more wraps at a fixed setting puts more strands in the bundle. Moving the neck binding changes how much of that length looks like a rounded head and how much hangs free below. If a sample looks too skinny but lands at exactly the right point on the bag, buying the Large maker addresses the wrong dimension.
Try a pair of samples instead of changing everything at once. Set the frame for the length you need, wind a first bundle and write down the thread and wrap count. Make a second at the same setting, with the same thread and a few more wraps. Tie both necks at similar distances from the top. Compare them against the actual fabric. A chunky tassel in the right shade may obscure the embroidery it was supposed to accent; a narrower one can leave the design visible. Keep the sample that works, not just the number of wraps.
When you switch materials, do not assume your wrap count travels with you. A loose wool yarn and a smooth embroidery thread can give very different outlines on the same frame. Clover’s instructions treat the illustrated number of turns as an example, not a quantity for every project. If you have only a small remnant, set aside the center tie, neck strand and hanging cord before winding the decorative bundle. Otherwise it is easy to use the entire accent color on the least visible inner layers.
What if the pattern falls between the presets?
Suppose a pattern needs a body 5.5 cm long. The 9940’s top marked length is 5 cm. Planning to trim that sample will not help: trimming only takes material away. Start from the 6 cm mark on the Large instead, finish one sample and trim it against a 5.5 cm guide. Check where you put the neck before cutting. The same half centimeter removed from the free ends looks different if the neck was tied low to begin with.
For a very short tassel, Clover’s leaflet suggests setting the Small frame to its minimum and trimming to the desired length. Try this on one piece before committing to a whole border. Wrap a strip of paper around the hanging threads as a cutting guide, as the instructions show, and remove only the projecting ends. Thread already removed cannot be recovered by shifting the knot. If most of every bundle winds up on the worktable as clippings, consider a different starting size or method.
The opposite case is simpler. A brief calling for 12 cm of actual fringe below the head is outside both marked ranges. A longer attachment loop changes where a tassel starts, not how much fringe is below it. Likewise, if the pattern illustration shows a round ball rather than hanging ends, the measurement may be a diameter. The Clover pom-pom maker size comparison is about that different shape; a 5 cm tassel and a 5 cm pom-pom are not interchangeable just because a ruler gives the same number.
Make the first one the reference for the rest
For matching curtain ties or a row of bag charms, leave the first approved tassel attached to its sample card. Note the frame number and setting, winding thread, wrap count, hanging-loop length and position of the neck. Compare the next tassel with that original rather than with the one you just finished. Trimming each one to match its immediate neighbor can let a small difference travel down the row until the two ends plainly disagree.
Read the product selection as a frame size, not a quantity of finished ornaments. Each link here is for one maker. You supply the working thread, cord and cutting supplies. If one pattern is still only a sketch, mocking it up with spare yarn and a ruler can answer the buying question before either frame comes home. Choose the Small when your recurring lengths are 3 to 5 cm and the Large for 6 to 10 cm. Consider both only if you can name projects on both sides of that division.
Official sources and further reading
Sources reviewed on November 4, 2026. Prices, availability and terms can change; recheck before buying.
- Clover USA: Small 9940 model, materials, inch markings and instructions
- Clover USA: Large 9941 model and five size settings
- Clover Manufacturing: both frames and their preset finished lengths in centimeters
- Clover: English instructions for winding, attaching a cord, tying and trimming
- Amazon US: Clover Small Tassel Maker, one tool, UPC 051221799402 Paid link
- Amazon US: Clover Large Tassel Maker, one tool, UPC 051221799419 Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.