Knitting & Craft Comparisons · Reviewed November 6, 2026
Clover Takumi 9 vs 13 Inch: Which Straight Needles Fit?
Choose the 9-inch Clover Takumi 3011-08 for a narrow flat project when a shorter pair fits your hands, chair and project bag. Choose the 13-inch 3012-08 when you want more room along the shaft for a wider row and have space for the longer ends. Both are single-point bamboo needles with wooden heads, and both are US size 8, or 5 mm. The extra four inches change the space available to hold work, not the specified needle diameter.
Best for
Knitters choosing a pair of 5 mm straight needles for flat work and deciding how much shaft length their project and knitting position need.
Probably not for
A project requiring another diameter, a seamless tube worked in the round, or anyone expecting a stated maximum stitch count or a hands-on speed comparison.
Specifications at a glance
| Exact version detail | Takumi 3011-08 | Takumi 3012-08 |
|---|---|---|
| Manufacturer product length | 9 inches | 13 inches |
| US needle size | 8 | 8 |
| Metric diameter | 5.0 mm | 5.0 mm |
| Needle format | Single pointed | Single pointed |
| Needle material | Bamboo | Bamboo |
| Head material | Wood | Wood |
| Surface description | Polished for smoothness | Polished for smoothness |
| Maximum stitch count | Not specified by Clover | Not specified by Clover |
As an Amazon Associate I earn from qualifying purchases.
Clover Takumi 3011-08, 9-inch single-point needles, US 8 (5 mm)
The shorter choice keeps the same 5 mm diameter while reducing the length you must accommodate beside your hands and inside a bag. Consider it for a narrow scarf, a small flat panel or a practice piece whose stitches fit without crowding the working tip. Its compactness is the reason to choose it; it is not a smaller stitch size or a special beginner-only needle.
Pros
- Four inches shorter per needle for a more compact working and storage arrangement
- Same documented diameter and materials as the longer comparison model
Cons
- Less shaft length available for holding a broad row of stitches
- A small cast-on can outgrow the available space if the pattern increases substantially
Who it’s for: Choose 3011-08 when the widest row fits comfortably and shorter ends suit your knitting position. Skip it if you already have difficulty keeping a wide row away from the working tip.
Check Clover Takumi 3011-08, 9-inch single-point needles, US 8 (5 mm) on Amazon Paid linkClover Takumi 3012-08, 13-inch single-point needles, US 8 (5 mm)
The longer choice adds room along each needle for the same-diameter flat-knitting setup. That can be useful for a wider panel or a piece that gains stitches as it grows. The tradeoff is accommodating longer rigid ends during each row and finding a suitable place for the unfinished work. Extra length does not establish a guaranteed capacity, faster knitting or better gauge.
Pros
- Longer shaft gives a wider row more space than the 9-inch option
- Keeps the same 5 mm diameter when length is the problem you need to solve
Cons
- Longer ends need clearance around chair arms, nearby objects and other people
- Requires a longer storage space and does not replace circular needles for every project
Who it’s for: Choose 3012-08 when additional row space is useful and the longer format suits your hands and seat. Skip it if your work is narrow and the extra length would mainly get in the way.
Check Clover Takumi 3012-08, 13-inch single-point needles, US 8 (5 mm) on Amazon Paid linkStart with the widest row, not the first cast-on
Look through the pattern before deciding that a short pair will be enough. A rectangle with a constant stitch count presents a different storage problem from a piece that begins at a point and increases repeatedly. Write down the largest number of live stitches held on one needle at any stage. Include stitches added for borders if the instructions work those at the same time. The relevant question is what the needle must hold at the widest stage, not how tidy the first few rows look.
A narrow scarf worked from one short end can remain a good candidate for the 9-inch pair even after the scarf becomes long. Its length hangs below the needle; it does not add stitches across the row. A scarf worked lengthwise reverses that situation, placing many more stitches on the needle from the start. Two projects with the same finished dimensions can therefore call for quite different needle-length decisions. Read the construction method instead of choosing from the finished object’s name.
Neither Clover page gives a maximum stitch count for these models. Do not convert 9 or 13 inches into a universal number of stitches. The yarn, stitch pattern and how tightly the stitches are grouped all affect the space they occupy. You also need room to bring a manageable group toward the point and work it without crowding. If your current short needle feels congested, the longer version is worth considering; that is a practical inference from its extra length, not a manufacturer capacity rating.
More needle length does not mean a larger stitch size
There are two different measurements in these product names. Nine and thirteen inches describe needle length. US 8 and 5 mm describe the size of the needle shaft. Both exact models have the same stated diameter. Buying the 13-inch pair therefore does not mean moving up to a thicker needle, and choosing the 9-inch pair does not turn a pattern into a smaller project. Keep the diameter requirement separate from the decision about how much work the needle needs to hold.
For a garment, the gauge swatch still decides whether 5 mm is appropriate for you, the yarn and the pattern. The Craft Yarn Council recommends checking millimeter sizing and matching a swatch to the pattern’s gauge. If you need a different diameter to obtain that gauge, neither of these exact US 8 options is the answer merely because one is shorter. Choose the correct diameter first, then make the length decision within that size.
If you switch lengths during a project, check your work rather than assuming a matching label proves nothing has changed. You may hold a longer needle differently or move the fabric with a different rhythm. The listed diameter remains 5 mm, but your handling still matters. Try the alternate length on a separate sample before changing halfway through a visible panel. Keep a note of the needle used for the original swatch so the next matching sleeve or panel starts from a known setup.
Check the space around your hands as well as the stitches
A longer pair must fit the place where you actually knit. Consider the arm of a favorite chair, the side of a desk and the person sitting next to you. The working tips may stay near the center of your body while the capped ends move around them. Four extra inches on each needle can matter in that arrangement even though the project itself is small. Measure your available space, and use your existing needles as a reference for where their ends travel.
Do not assume short needles suit every hand or that long needles are only for experienced knitters. Some people prefer more shaft behind the hand; others find that length unnecessary. Your usual way of supporting the needle is part of the fit. If you can compare lengths in person, hold each in your normal working position and consider both knitting and purling movements. This guide has not measured grip comfort or fatigue, and the product dimensions cannot establish those outcomes for an individual.
Also consider how you turn at the end of a flat row. A wider piece plus longer rigid needles needs somewhere to go as you reposition it. Keep the fabric supported and give yourself enough room to turn without catching the yarn on nearby objects. If accommodating the longer pair would require an awkward working position throughout every session, more shaft space may not be the right solution. A different needle format could be a better question than which of these two lengths wins.
Straight needles have a limit that extra length cannot remove
These are single-point needles with a head at the opposite end, not two tips joined by a cable. The normal use considered here is knitting a row across, turning the work and knitting back. A pair of 13-inch needles does not create one continuous 26-inch holding area: at the end of a row the live stitches sit on one needle. That distinction matters when judging a broad blanket panel or a pattern with many increases.
For a project written to be worked in the round, do not substitute these straight pairs without understanding how that changes the instructions. Knitting a flat piece and seaming it is a different construction choice, not a feature unlocked by the longer model. Likewise, a very broad flat project can justify looking at a suitable circular needle used back and forth, even though the finished item is not a tube. Neither product should be presented as the all-purpose answer to every pattern that lists 5 mm.
Length also does not track your place in the work. If a broad row contains several repeated sections, choose a separate way to mark those boundaries. The Clover locking vs split-ring stitch marker guide covers removable location markers. A marker can help identify a place; it cannot create more room on a crowded needle. Solve the capacity question and the pattern-location question separately.
Choose for the next project and the bag that will carry it
Check the inside of your project bag before ordering. A bag that accepts a loose 13-inch needle diagonally may be less convenient once fabric and a ball of yarn are attached to the setup. Think about the opening, the zipper and where the points will sit when the bag is closed. Allow room for the work rather than bending or forcing the needles into a compartment. The 9-inch version is easier to accommodate in a shorter space, but compact storage is not a reason to overcrowd a large project.
When pausing, secure the work in a way appropriate to the needles and record where you stopped. A row counter is a separate option for the running tally; the Clover Kacha-Kacha vs Mini counter comparison explains the loose and pendant-style formats. Keep that number associated with the correct project. Owning several similar bamboo pairs makes a small label with the pattern, diameter and current stage more useful than relying on memory.
The buying decision can now be specific. For a narrow, constant-width piece, choose 3011-08 if its shorter length fits your normal hand position and storage. For a wider row, choose 3012-08 if its extra room is useful and the longer ends have clearance. Choose neither if the swatch calls for another diameter or the project needs a different format. On the linked Amazon offer, confirm Clover Takumi, single point, size 8 and the intended 9- or 13-inch length; nearby size and bundle options are not automatically the same purchase.
Official sources and further reading
Sources reviewed on November 6, 2026. Prices, availability and terms can change; recheck before buying.
- Clover USA: exact 3011-08, 9-inch length, 5.0 mm diameter, bamboo needle, wood head and polished surface
- Clover USA: exact 3012-08, 13-inch length, 5.0 mm diameter, bamboo needle, wood head and polished surface
- Craft Yarn Council: millimeter sizing, US 8 mapping and matching a gauge swatch to the pattern
- Amazon US: Clover Takumi 9-Inch Single Point, Size 8; model 3011-08 and two needle pieces Paid link
- Amazon US: Clover Takumi 13-Inch Single Point, Size 8 listing identity Paid link
Commission disclaimer
This article contains affiliate links. If you buy or sign up through one of them, I may earn a commission at no extra cost to you. That commission does not change the price you pay or the criteria used in this guide. Product details, prices, availability, and terms can change, so confirm the current information on the linked page before buying.